Package Includes:

• (1) Peavey PVX 10 800 Watt 10" Passive 2-Way Pro Audio PA DJ Speaker Monitor
• (1) Rockville Pro Mic Kit 1 - High-End Metal Microphone+Mic Stand+Carry Bag+Cable

---

Authorized Peavey Dealer!

Video of PVX10:

Description of PVX10:

The PVX 10 is a two-way sound reinforcement system based on a heavy-duty 10" woofer and a RX10N titanium diaphragm dynamic compression driver mounted on a 100° x 60° coverage Quadratic Throat Waveguide. Its sleek modern appearance coupled with excellent performance offer an outstanding package.

The lightweight yet rugged injection-molded plastic enclosure with molded-in stand mount cup facilitates portable use for live music or PA sound. The trapezoidal cabinet has two handles for ease of portability, and an extra 45° angled section on the right side to allow use as a floor monitor. Four sets of flying/mounting points, two on the top, two on the bottom, and a pull-back point on the rear, with a total of 13 cabinet inserts, provide for the ultimate in installation flexibility. A black powder coated perforated steel grille provides driver protection and a professional appearance.

The heavy-duty 10” woofer has a 2.4” voice coil diameter, and a 50 oz. magnet for 200 watts continuous worth of thumping bass. The RX 10N compression driver tweeter is coupled to a Quadratic Throat constant directivity waveguide, with smooth, even response, low distortion and good high frequency dispersion. This horn has an asymmetrical vertical polar response, aiming the main energy lobe down 10°, so it is aimed at the audience, instead of over their heads. This helps reduce ceiling reflections for greater clarity and gain before feedback.

The PVX 10 speaker system is rated at 400W program power handling, and the full crossover network includes high voltage film capacitors, high current inductors, and high frequency driver protection for clear punchy sound, and excellent long-term reliability. A 4-pin twist-lock connector and a ¼” phone jack input make hook-up a breeze.

The cabinet of the PVX 10 speaker system has multiple mounting fly points, providing outstanding versatility in permanent install use. A widely spaced pair of M8 inserts molded-in on the top and the bottom for use with eyebolts, and a set of four M8 inserts is available on the top and on the bottom, those in the pattern used for the Peavey VM70 mounting bracket. A pull back point is provided on the rear near the bottom. 

This is a total of 13 mounting inserts in all. All of these inserts have large retaining hardware on the inside of the plastic cabinet, providing a more reliable and safe mode of mounting the cabinet

Features:

• Peavey PVX 10 800 Watt 10" 2-Way Pro Audio PA Speaker
• Program Power Handling: 400 Watts
• Peak Power Handling: 800 Watts
• Two-Way Sound Reinforcement Enclosure
• Crossover Network For Driver Protection And EQ
• High Frequency Driver Protection
• Durable Plastic Injection-Molded Trapezoidal Enclosure
• Asymmetrical Horn Aims The Sound Down 10 Degrees, At The Audience, Not Over Their Heads
• Full-Coverage Heavy-Duty Perforated Steel Grilles, With Powder Coat Finish
• Pole Mount Molded-In
• Top And Bottom Flying Point Inserts
• Patented Quadratic Throat Waveguide Technology, 100° x 60° Coverage
• RX 10N Compression Driver, With 1" Titanium Diaphragm
• 10" Heavy-Duty Woofer With 2.4" Voice Coil & 50 Oz. Magnet
• Extra Angled Section On Right Side Allows Floor Monitor Use
• Product Weight: 25 lb
• Product Dimensions (H x W x D): 20" x 12.7" x 11.06" inches

---

How to Set Up Your PRO MIC KIT 1:

Video of PRO MIC KIT 1:

Unboxing Video of PRO MIC KIT 1:

The Rockville pro mic kit 1 was created in response to a need we saw in the market for a very high quality microphone at an affordable price. We feel there are a lot of good mics around from reputable brands that sound great, but they are very expensive. When we looked at the cheaper ones on the market from both reputable and entry level brands; we were not impressed. We sent our product developers on a mic testing journey. A lot of our employees here at Rockville love to do karaoke, so it was not long before we found a mic that we all fell in love with!

You may be asking yourself; so what makes this mic so good? Well, there are 3 main components that make a mic sound the way it does. The cartridge, the magnet, and the mic cable. Our mic uses an M-56 cartridge which has a neodymium magnet. This Particular combination of components supplies better sensitivity; which means your mouth will not have to be on the mic for it to pick up the sound. Our components supply more than Just a great pickup pattern, They also has very little background noise, and great tone.

We pay a lot of attention to detail. We could have saved lots of money and got our cost down by including a cheap cable, but we know how important the cable is. We are very Passionate about our products and we really have a lot of respect for our customer’s standards. For this reason, we included in this package a 100 % OFC copper cable. There is no aluminum in this cable! This means the cable will last longer and will sound A Lot better. Ultimately what you get Is a distortion free signal. In addition we use a true gauge mic cable with proper thickness.

The body of the microphone is also something we paid a lot of attention too. We did not want it to be too light and feel cheap. We made a nice solid metal microphone. It has a great feel to it. We could have went with plastic or cheaper metal, but we wanted to create a mic that we ourselves would want to use.

For the mic stand we include in this bundle, we made sure the height adjusts high enough and that the stand is thick and sturdy enough for anyone who will use it. We use plastic feet covers to stop unwanted sliding. The stand tubing is made of iron. It is rock solid. We gave the stand a beautiful black painted finish. Best of all, the stand is totally portable weighing in at only 2.42 LBS!

We pay a lot of attention to detail so I would like to mention why we went with a canvas carry bag. We sourced multiple bags and had multiple options of bags. We ended up spending more money and going with the better bag. It’s a great quality canvas travel bag that will hold the mic, the stand, and all your mic accessories/cables. The bag has 2 carry straps which allow you to carry it with your hands or on your shoulders like a backpack. We also included internal sponge padding and straps to separate the mics and the stand and keep them both from rubbing against one another. You will be impressed with every component we include in this bundle from the mic to the bag.

90 Day Money Back Guarantee including return shipping!
If within the first 90 days you are not 100 % satisfied for any reason, contact us and we will send you a return label and give you all your money back! (Item must be returned complete with all accessories and the original box please).

What's Included:

• Fully metal wired mic
  
• Mic cable (XLR to ¼” 100% OFC Copper!)
  
• Mic clip
  
• Metal mic stand
  
• Canvas carry bag
  
• Owners manual
  
• Warranty
  

Features:

• Rockville Pro MIc Kit 1 - High-End Metal Microphone+Mic Stand+Carry Bag+Cable
  
• Mic Features:
  
• M-56 Cartridge
  
• Full metal mic body
  
• Type: dynamic
  
• Neodymium magnet
  
• Polar Pattern: uni-directional
  
• Frequency Response: 80 - 13Khz
  
• Impedance: 600 Ohms ± 30%
  
• Sensitivity: -72 ± 3dB
  
• Mic Stand Features:
• High quality metal mic stand
  
• Made of strong iron tubes!
  
• Black Painted Finish
  
• Adjustable height: 31.5 – 59 inches
  
• Weight: Only 2.4 LBS!
  
• Plastic feet covers to stop unwanted sliding
  
• Plastic adjustable connector
  
• The bottom part of base is made of 20MM thick iron
  
• Top part of base is made of 15.2 MM thick iron
  
• Feet are made of 19MM iron 
• Bag Features:
• High quality canvas
  
• Comfortably holds microphone, mic stand, cable and other mic accessories
  
• Other bundles include plastic bags, this canvas bag will protect better and can be thrown around without damaging your equipment
  
• Internal belt ties to lock the mic and cable in place and separate it from the stand
  
• Internal separator separating the mic from the stand to eliminate them rubbing together
  
• Internal sponge padding for protection the gear in the bag
  
• High quality zipper
  
• Bag prevents equipment from getting scratched
  
• (2) carry straps make it easy and comfortable to transport
  
• Straps were built as handles to carry or as shoulder straps to carry them like a backpack
  
• Bag is made with scratch proof canvas
  
• Bag can hold up to 22 pounds of gear! This is a very high quality bag!
  
• Stylish Rockville logo on bag so you can do not confuse this bag with someone else’s
  
• Dimensions of Bag: 30.33” inches Length x 3.54” inches height
  
• Weight of bag: 0.44 pounds
  
• Cable Features:
  
• XLR to ¼” Cable
  
• 20 Feet
  
• 100% OFC oxygen free copper
  
• Cable delivers crystal clear distortion free signal
  
• Cable is 5 MM thick with cover (22 AWG standard mic cable)
  
• XLR cable connectors are very solid and durable
  
• Mic clip Features:
  
• Heavy Duty Standard Size Microphone Clip
  
• Stand Mountable
  
• Solid Plastic Construction with copper inside (part that screws to the mic)
  
• Black Color
  

Owner’s Manual

About Rockville Quality Control Procedures:

The Rockville brand stands for Quality, Innovation and Value. All Rockville products go through the most rigorous quality control standards in the industry. Products go through months of extensive testing before they reach your hands. All user functions are tested and all internal components are tested for quality. Rockville makes products that are virtually un-breakable! Rockville is one of the only brands in its class to test every concept model for weeks or months before starting production. Once production begins, Rockville sends product engineers to their factory to quality control every line of production. During production every product is tested and on top of that Rockville goes the extra mile and has their high level product engineers do an additional quality control. They test a certain percentage of all products from the production line a second time to ensure that the quality meets their vigorous standards, and to make sure that there is never a batch of products with even a slight problem. All Rockville products are backed with a hassle free warranty.