Package Includes:

• (1) Novation Peak Eight-Voice Desktop MIDI USB Polyphonic Synthesiser For MAC or PC
• (1) Novation IMPULSE 49 Ableton Live 49-Key MIDI USB Keyboard Controller
• (1) Novation 49-Key Case Soft Carry Bag For Launchkey 49 MIDI Controller Keyboards
• (1) Rockville DPM6B 6.5" 2-Way 210W Black Active/Powered Studio Monitor Speaker
• (2) Rockville RHTSC 36" Inch Surround Sound Home Theater Speaker Stands
• (1) Pair Rockville RRS190S Foam Studio Monitor Isolation Pads 7.5" x 9.5"/3 Angles

---

Authorized Novation Dealer!

Eight-voice polyphonic synthesizer
Peak sounds warm and rich with filthy, biting overdrive. It’s an eight-voice desktop polyphonic synthesiser with three New Oxford Oscillators for each voice. The synth has a resonant multi-mode analogue filter for each voice, and three distortion points in an analogue signal chain.

Analogue where it matters – digital where it counts
Peak’s design consultant was none other than Chris Huggett, the man behind Bass Station, Supernova, OSCar and many more legendary synths. Peak has its origin in the Bass Station II analogue monosynth, and Peak’s oscillators sound completely analogue by being high-quality NCOs (Numerically-Controlled Oscillators), but gain the flexibility of the digital domain with 17 digital wavetables.

Build and refine new sounds from scratch
Broaden out your electronic music, draw in new influences and take artistic risks. The modulation system puts the most frequently used assignments right at your fingertips in the main controls. More elaborate movements and secondary ‘via’ assignments are made just a few menu button presses away.

Connect to just about anything
You can plug Peak into your Mac or PC via USB and start playing. It also has MIDI I/O on five-pin DIN ports, so you can connect your other MIDI gear. Oh, and did we mention it connects to modular systems via a CV modulation input

Features:

• Novation Peak Eight-Voice Desktop MIDI USB Polyphonic Synthesiser For MAC or PC
• Two ways to create waveforms - Analogue-sounding NCOs (Numerically-Controlled Oscillators) and 17 digital wavetables.
  
• A colossal amount of distortion - Three distortion points for each voice – pre-filter, post-filter and global – in an analogue signal chain.
  
• Control expression - Peak is capable of receiving polyphonic aftertouch, which puts expression right at your fingertips.
  
• Cross-modulate oscillators - The three New Oxford Oscillators for each voice can become a linear FM source using either the analogue-sounding NCOs (Numerically-Controlled Oscillators) or digital wavetables. They are also able to cross-modulate in a recursive loop.
  
• Huge modulation system - 16-slot modulation matrix and 16 direct assignments controlled from the front panel, cleverly arranged for intuitive patch design and sound editing. Three ADSR envelopes and two LFOs for each voice.
  
• Easily switch modulations - Two animate buttons give live performers instant one-touch transformation of patches.
• Mind-blowing sounds on-board - Reverb, delay and chorus at your disposal, and there’s also an arpeggiator.
  
• Connect to hardware and software - Connect and sync to your music software and MIDI-compatible hardware. CV modulation input used to slot together modular systems.
  
• Store unlimited sounds - Keep as many patches as you like on your Mac or PC using the Components software. Learn more about Components here.
  

Specifications:

• 42 Control knobs
  
• 8 35mm Sliders
  
• 1Volume knob
  
• 2 Data encoders
  
• Rubberised knob caps with spun metal discs
  
• 30 Function buttons (not lit)
  
• 16 Function buttons (lit)
  
• 2 Animate buttons plus hold button
  
• 90 Indicator LEDs
  
• OLED display
  
• Kensington Security Slot
  
• Power switch
  
• Power supply connector
  
• USB socket
  
• MIDI In / Out / Thru
  
• 2 1/4" jack socket for continuous or switched pedals
  
• 3.5mm jack socket for CV in
  
• 1/4" jack sockets for left and right outputs
  
• 1/4" jack socket for headphone output
  
• Metal chassis with wooden end cheeks
  
• Metal magnetic inset end pieces
  
• Synth Engine:
  
• 8 note polyphony (dependent on voices used per note)
  
• Mono-Timbral
  
• Per voice:
  
• 3 oscillators
  
• 1 noise generator
  
• 1 ring modulator
  
• 2 LFOs
  
• 1 Amp envelope and 2 mod envelopes
  
• 1 Filter
  
• Waveforms include:
  
• Sine, tri, sawtooth, square / pulse plus 17 wavetables of 5 waveforms per row
  
• Filter:
  
• 1x State variable OTA filter per voice
  
• 12/24dB slope
  
• Low-pass / band-pass / high-pass
  
• Pre-filter overdrive
  
• Post-filter distortion
  
• Modulation:
  
• 16 modulation slots per patch
  
• Each slot has 2 sources to 1 destination
  
• Mod sources (17):
  
• Direct (depth)
  
• Modulation wheel
  

  ---

  Authorized Novation Dealer! 
  

  Get More Creative
  Impulse is our ultra-responsive and expressive keyboard with loads of fully assignable controls. Designed for people who love to play keys, it's a pleasure to play and integrates seamlessly with Ableton Live, Logic Pro, Pro Tools and other major music software.
  
  Our Most Expressive Keyboard
  We specifically designed the Impulse keyboard to let you create truly expressive performances. Ultra-responsive with semi-weighted action and aftertouch, its full-size piano style keys adapt perfectly to any instrument you want to play, including organs, synths and pianos.
  
  While you’re playing, our unique High Rate Scan (HRS) technology will scan the keyboard 10,000 times per second to capture every nuance of your performance.
  
  You can choose between a 61, 49 and 25-key version of Impulse. The only difference is that the 25-key sacrifices its faders to make it easier to carry around.
  
  Produce Better Music
  Mix and sculpt your sound using endless smooth-action knobs, low-profile 45mm faders, loads of buttons and a custom LCD screen. All controls work seamlessly with major music software and can be mapped to any parameter.
  
  Do More with Your Drum Pads
  Play drums in real time with pressure-sensitive pads for rolling beats, looping drum samples and designing arpeggios. These pads also function as multicoloured clip launchers in Ableton Live, so you can tell whether clip is loaded (yellow), playing (green), or recording (red).
  
  Connect To Just About Anything
  Impulse is class-compliant and USB bus-powered, so you can simply plug it into Mac or Windows and get started straight away, without the need for a power supply.
  
  Impulse is gig-ready, too; 5 pin MIDI outputs allow you to connect to your favorite synth or module.

  XLN Audio Addictive Keys
  All MIDI keyboards now come with XLN Audio Addictive Keys. The Addictive Keys virtual instrument from XLN Audio is on the house when you register your controller keyboard or the Launchpad Pro. One full license per account gives you one Addictive Keys instrument.
  
  Make Music Straight Out of the Box
  Ableton Live Lite comes in the box and integrates seamlessly with all the controls to provide:
  

  • Mixer control (all channels)
    
  • Transport control
    
  • Clip launch (using Impulse's back-lit drum pads)
    
  • Scene launch
    
  • Plug-in/Device control
    

  You’ll also get an impressive library of free samples from Loopmasters, as well as our Bass Station software plug-in, which recreates the sound of the legendary analogue bass synthesizer.
  
  Impulse also gives you instant hands-on control of other major music software, including:

  • Pro Tools: Mixer control (all channels), Transport control
    
  • Logic: Mixer control (all channels), Transport control, Plug-in instrument/effects control (instant control of Logic's own plug-ins and 3rd party VST/AU plug-ins)
    
  • Cubase: Mixer control (all channels), Transport control, Plug-in instrument/effects control
    
  • Reason/Record: Mixer control, Transport control, Instant control of rack devices (Thor, Dr Octo Rex etc.)
    
  • Cakewalk/Sonar: Mixer control (all channels), Transport control, Plug-in VST instrument/effects control

  Features:

  • Create Expressive Performances - Ultra-responsive, full-size, piano keyboard with semi-weighted action and aftertouch.
    
  • Accurately Capture Your Playing - Our unique High Rate Scan (HRS) technology scans your keyboard 10,000 times per second to capture every nuance of your performance.
    
  • Easily Assign All Controls - Easily control all major music software, including Ableton Live, Logic and Pro Tools, with Automap for instant hands-on DAW, instrument and plug-in control.
    
  • Shape Your Sound - Endless smooth-action knobs, low-profile faders, assignable buttons and LCD feedback display for directly shaping your sound.
    
  • Do More with Your Drum Pads - Velocity-sensitive pads for rolling and looping beats, designing arpeggios and launching clips in Ableton Live.
    
  • Tough Enough to Tour - Solid and tough enough to handle the most demanding live situations.
    
  • Plug-In and Play - Fully class compliant and USB bus-powered, so you can plug in and play on Mac or Windows without a power supply or drivers.
    
  • Make Music Immediately - Comes with Ableton Live Lite, Novation Bass Station VST and AU plug-in, and a huge collection royalty-free samples from Loopmasters.
  • All of our MIDI keyboards now come with XLN Audio Addictive Keys
    
  • All Novation products come with 4 GB of Loopmasters Samples

  Specifications:

  • Novation IMPULSE 49 Ableton Live 49-Key MIDI USB Keyboard Controller
  • 49 note velocity sensitive piano style keyboard with assignable aftertouch
    
  • 8 multi-colour large backlit velocity sensitive drum pads
    
  • 8 endless encoders (infinite rotation)
    
  • 9 sliders
    
  • 6 dedicated transport controls
    
  • Pitch bend and modulation wheels
    
  • 2 octave / transpose buttons
    
  • Custom blue-backlit LCD display
    

    ---

    Authorized Novation Dealer!
    

    Features:

    • Keyboard Size: 49
      
    • Internal Length: 34"
      
    • Internal Width: 14"
      
    • Internal Height: 4"
      
    • External Materials: Nylon
      
    • 1 Handle, 1 Shoulder Strap
      
    • Pockets: 1 External

    ---

    Advantages of buying from an authorized seller:
    • Best prices - We sell all Novation Products at great prices
      
    • Full Factory Warranty
      
    • Lifetime Customer Service by Novation product experts
      
    • Guaranteed legitimate and authentic merchandise 

    Please note: If you purchase Novation from an un-authorized seller then you are taking a big risk. You will not have any manufacturers warranty, and there is no guarantee that the item is authentic, brand new, or even working.

    ---

     

    
    

    Video of DPM6B:

    
    

    The Rockville DPM6 Active/Powered Studio Monitor Speaker is a step-up version of our popular APM series. These speakers are sold individually and each speaker is bi-amped which means it has one amp for the highs, and another for the lows. These speakers have 210 watts of peak output power and 105 watts RMS. These sound better than the famous brand studio monitors. They have a flat frequency curve making these the perfect studio monitors.  The only reason our price point is not 300 % higher is because you are buying directly from the manufacturer. We are one of the leading speaker manufacturers in the USA, and we have a state of the art manufacturing process. There is a lot to talk about so I will break it down into sections.
    
    Description of the Enclosure:
    We chose a wooden enclosure as opposed to a plastic enclosure. Your studio is made of wood for a reason. The sound characteristics of high quality wood are better than plastic. We only use the highest quality MDF wood. We do not bother with cheap particle board material when we want to make the best speakers. The thickness is 0.5” around and the front board is a full 1” thick to give you the best sound quality possible. The enclosure is built with the perfect amount of air space to maximize sound quality for a studio.
    
    Every studio or computer room should look beautiful. We believe speakers should enhance the look of a room. We make these speakers in 3 beautiful finishes: painted black, painted white, and wood finish. We use “baking paint” made for wood surfaces. Baking paint is long lasting and is the best paint for speakers! We went with a beautiful finish that is mostly matte with a slight shine to it. Our designers spent countless hours on the color and design to make sure it is not only beautiful, but elegant as well to improve the appearance of your studio or room. We kept all the controls on the back of the speaker, which will keep the speaker looking very clean and modern. The tweeter has a curved front bezel to make the highs crystal clear and distortion free.
    
    Amplifier and Speaker Components Details:
    To get the most efficiency we use a class “D” amplifier. We use the best quality components from the most reputable circuit manufacturers in the world in order to produce crystal clear sound. Most brands do not like to reveal what’s in the guts of the speaker. We feel differently. We want you to know what is inside so you realize how good of a value we are offering and also so that you can understand how good these really are. We use ADAU 1701 Digital Sound Processor (DSP) for audio processing and TPA3116 for amplification. These are both known to be the best in class circuit designs. These components are amazing and allow us to adjust the sound via soft programming on a computer during the design stage to get the perfect sound. ADI and TI are the names of the makers of these ICs. Most people do not know the brand names that make circuits; but these are the most famous and reliable in the industry. Only very high end manufacturers like us use these components.
    
    For highs, we use Ferro fluid enhanced 1.5" neodymium silk dome tweeters with metal grill protection. If you are an audiophile, I am sure you have tested and love the sound of silk dome tweeters. The neo magnet is strong and can handle a lot of heat. This enabled us to beef up the amplifier power without having to worry about melting or blowing the tweeter. The highs on these sound really good! I cannot wait for you all to hear it in person, because I cannot describe how good these sound! You really need to listen to them in person.

    
    
    We use a 6.5” woofer that will out-perform a regular 6.5” woofer any day! The bass sounds amazing on these! Very clear and punchy! The woofer has an injection molded polypropylene cone. This is an engineered type of plastic that is used on many speakers today. It is strong and puts out a great sound. The rubber woofer surrounds increase sound quality and eliminate unwanted distortions. They sound better than foam surrounds in my opinion, which is why we went with rubber. The computer optimized electronic crossover network supplies amazing sounding highs, lows, and mids — basically it filters out unwanted frequencies from each component so that each speaker plays the right frequencies, which in turn allows the speaker to be louder without distorting. We use very high-grade crossover filters in our speakers. The specially wound voice coils produce accurate responses along the entire frequency spectrum. We developed the speakers with the most optimized magnet structure, cone, and cabinet space, with the goal of reproducing the sound to play back exactly the way it was recorded!
    
    Added Benefits:
    Our factory uses the latest Precision Glue Machine (Over 500 meter Tunnel Oven). But you may ask why am I talking about glue! Well, actually, the glue on the speakers is of the upmost importance. If the glue does not hold up, the speaker will be done and blow. We use the latest machinery to manufacture these speakers. The SPL of the speaker goes up when you use better glue and a better machine that can secure the glue in place. If the glue can handle more heat, than your speaker can handle more power!

    
    
    Thick “Wadding” protects the inside of the speaker cabinet. This can be seen if the speaker cabinet is removed. Basically, wadding is a white chemical silk type of material that we put inside the speaker cabinet for multiple reasons. It helps to make the sound clearer, and at the same time it protects all the parts inside the speaker. This material is also fire retardant. This is unique to our speakers. Most other brands do not take this step due to the cost of the material, but it is a game changer if you are trying to create the best speaker!
    
    Inputs and Outputs and Rear Panel Controls:
    As I mentioned earlier, we kept all the controls on the rear of the unit to make the speaker look clean and modern. The Volume, High Pass filter and Low Pass filter controls are all found on the rear of the unit. The DPM6 has all your standard studio inputs and outputs such as a ¼” TRS and XLR balanced input jacks, and RCA input.
    
    Features:

    • Rockville DPM6B 6.5" 2-Way 210W Active/Powered Studio Monitor Speaker in Black (sold individually)
      
    • Peak Power: 210 Watt
      
    • RMS Power: 105 Watt
      
    • Bi-Amped: 35 Watts for highs, and 70 watts for the lows
      
    • Enclosure is made of top quality MDF wood. Our enclosure is not particle board; it is true high-grade MDF! The enclosure is 0.5” thick around while the front board of it is a full 1” thick to give you the ultimate best sound quality!
      
    • We use “baking paint” made for wood surface. It lasts long and is the best paint for speakers!
      
    • Beautiful finish is matte with a slight shine to it. Our designers spent a lot of time on the color to make it beautiful and elegant looking to improve the appearance of your studio or room
      
    • The enclosure is built with the perfect amount of air space to maximize sound quality for a studio
      
    • The port is built to the perfect spec to enhance the sound
      
    • Auto-Switching Power Supply
      
    • Ferro Fluid Enhanced 1.5" Neodymium Silk Dome Tweeter With Metal Grill Protection
      
    • Tweeter has 1” voice coil diameter
      
    • Curved Front Bezel Design Eliminates Standing Wave Distortion
      
    • Injection Molded Polypropylene Cone Woofer
      
    • Rubber woofer surrounds increases sound quality and eliminates unwanted distortions
      
    • Computer Optimized Electronic Crossover Network Supplies Amazing Sounding Highs, Lows, and Mids
      
    • We developed the Most Optimized Magnet structure, Cone, and Cabinet Space that Reproduces the Sound to Play Back Exactly the Way it was Recorded!
      
    • Specially Wound Voice Coils Produce Accurate Responses along Entire Frequency Spectrum
      
    • Distortion-Free Playback Even at Max Volume Listening! Very Clean Sound!
      
    • Our factory uses the latest Precision Glue Machine (Over 500 meter Tunnel Oven). To put it in simple to understand terms; the glue on the speakers is of the upmost importance. If the glue does not hold up, the speaker is done. We use the latest machinery to manufacture these speakers. The SPL of the speaker goes up when you use better glue and a better machine the secure the glue in place
      
    • Thick “Wadding” protects inside the speaker cabinet – Wadding is a white chemical silk type of material that we put inside the speaker cabinet for multiple reasons. It helps to make the sound come out more clear, and it also protects all the parts inside the speaker. This material is also fire retardant. This is unique to our speakers. Most other brands do not take this step due to the cost of the material, but it is a game changer!
      
    • World class top of the line audiophile grade components! We use ADAU 1701 Digital Sound Processor for audio processing and TPA3116 for amplification. These are both known to be the best in class circuit designs. These components are also amazing and allow us to adjust the sound via soft programming on a computer during the design stage to get the perfect sound. ADI and TI are the names of the makers of these ICs. Most people do not know brands who make circuits, but these are famous in that industry and are known to be the best of the best. Only very high end products use these components
      
    • 110 Volt compatible with SMPS technology – Normally most items have a transformer. Our SMPS technology switches voltage more efficiently and adheres to all international efficiency standards!
      
    • Every Speaker in Production Undergoes a Computer Generated Sound Check Test to Ensure it Upholds to our Specifications and Standards
      
    • We use a “6Sigma” style Quality Assurance of Each Product (Long story short, each product will work perfectly as advertised for a long long time!)
      
    • Transducer Production Line to Make the SPL Performance Stable
      

    Inputs / Outputs / Controls:

    • Volume control
      
    • Independent High (–2dB – +1dB) and Low (–2dB – +2dB) frequency level controls
      
    • One each ¼” TRS (TS capable) and XLR balanced input jacks
      
    • RCA  input
      

    Details:

    • Certification: CE and RoHS Compliant
      
    • Amplifier: Class D, very efficient amplifier with top components! (ADI--ADAU1701 DSP, TI--TPA3116, SMPS)
      
    • System Impedance: Tweeter 6 Ω ; Woofer 4 Ω
      
    • Signal to noise ratio: 80dB (Maximum output with THD+1<1%, A-weight)
      
    • Max SPL: 102dB @ 1w/1m
      
    • THD: 0.10%
      
    • Frequency Response: 50Hz - 20kHz

    Owner's Manual
    

    ---

    

     

    Video of RHTSC:

    The Rockville RHTSC high performance wood speaker stands are designed with appearance, performance, and quality in mind. These stands are perfect for Bookshelf speakers, surround sound speakers and even studio monitors!
    
    Our stands are finished with premium furniture-grade paint that will not crack, chip, or peel. They will look great in your living room, family room, den, or even studio. These stands are constructed from high quality medium density fiber core to minimize resonance. Unlike our competitors who use particle board we use a higher quality wood in the construction of our stands. 
    
    With the included brass and rubber spikes as well as the included EVA speaker isolation pads you can feel confident that your speakers will be sturdy and perform optimally no matter what floor surface they are on. 
    
    In addition to appearance and quality we also made sure to focus on performance. The height of these stands are 36”. The reason we chose this specific height is that after testing stands at other heights we noticed this height was optimal for listening. In addition to performance we also would like to note that at 36” these stands look gorgeous! The included isolation pads not only provide a no-slip surface but help your speakers achieve superior acoustic quality.
    
    Another really cool feature I would like to mention is the empty body design. By adding sand to the body of the stand you can increase the weight if you so choose. The load capacity of these stands are 60 lbs. Most other stands on the market have a maximum load capacity of 20 lbs. which really is not enough for a lot of speakers on the market. These stands are sturdy, built well, look great, and out-perform the competition so buy with confidence! 
    

    Includes:

    Features of RHTSC:

    Specifications:

    Owner’s Manual

    ---

    About Rockville Quality Control Procedures: 
    The Rockville brand stands for Quality, Innovation and Value. We aim to deliver products twice as good as our competitors at a fraction of the cost of famous brands. All Rockville products go through the most rigorous quality control standards in the industry. Products go through months of extensive testing before they reach your hands. All functions and components are tested for quality. Rockville makes products that are virtually un-breakable! Rockville is one of the only brands in its class to have engineers and technicians test every concept model for weeks or months before starting production. Once production begins, Rockville sends product engineers to the factory to quality control every product. After production is complete Rockville has the head of QC in our overseas office test a certain percentage of all products from the production line a second time to ensure that the quality meets our strict standards. All Rockville products are backed with a hassle free warranty.
     

    ---

    Video of RRS190S:

    
    

    
    

    Authorized Rockville Dealer!

    Description:

    The Rockville RRS190S is specially designed to increase monitoring accuracy. These are made to decrease unwanted vibrations and noises so that you are left with accurate sounds. No matter how good your monitors are, they can never sound the way they were meant to if they are carrying over vibrations and unwanted noises into your music.  These are 7.5" by 9.5" and includes 2 pads which will accommodate (2) monitors.

    Isolate your speakers!
    Rockville isolation pads are designed to acoustically isolate your studio monitors. They were designed to work in studios and give studio quality sound; however some customers will also use them for high end home theater setups. Typically when speakers are placed on hard surfaces, they can vibrate. The vibrations cause the speakers’ sound to become inaccurate, unfocused and lose their “musical transparency." The Rockville Isolation Pad package includes a pair of high-density acoustic foam pads with multiple angle inserts that allow you to fine-tune your speakers positioning. Though conceived and designed for studio monitors/speakers you can decouple and isolate any sensitive studio device such as DVD players, turntables and laptops.
    
    How to get maximum performance from your Monitors!
    Rockville Studio Isolation Pads are the most cost-effective improvement you make to your sound system. Imagine the isolation pads as being your speaker systems “shock absorbers”.  Place the Rockville Isolation Pads under your monitors they will absorb vibrations and decouple your monitor to stop vibrations that would otherwise transfer into your studio environment. Isolation Pads will make a day and night difference in the sound quality of your studio. You spent good money on your studio monitors, now go the extra mile to make them sound their best.
    
    Rockville Studio Isolation Pads Feature:
    
    

    Decouple your monitors for super-accurate sound
    What Rockville Isolation Pads do is called "decoupling." When your monitors sit on your desk or floor, they transmit vibrations that cause the surface that they're sitting on to vibrate at low bass frequencies. These bass vibrations don’t get recorded in to your mix because they are not really in your mix. But when you play the mix in your studio the “coupled” vibrations, will be heard giving you false sound reproduction. But because these “coupled” vibrations are not being recorded when you play your mix outside of your studio, all those low bass frequencies will be gone. By “decoupling: your monitors, you eliminate these false low frequency vibrations, helping you to create accurate mixes that will sound great on any playback system.
    
    Perfectly position your monitors
    Rockville Isolation Pads allow you to position your studio monitors at the exact angle you need. Each pad comes in two pieces, each with a 4 degree angle. That allows you to tilt your monitor at one of five different angles: flat, +/-4 degrees, or +/-8 degrees. This allows you to place your monitors flat on your desk top or angled down for proper positioning.
    The most affordable way to improve the sound of your studio monitors
    

    Features:

    About Rockville Quality Control Procedures:
    
    The Rockville brand stands for Quality, Innovation and Value. All Rockville products go through the most rigorous quality control standards in the industry. Products go through months of extensive testing before they reach your hands. All user functions are tested and all internal components are tested for quality. Rockville makes products that are virtually un-breakable! Rockville is one of the only brands in its class to test every concept model for weeks or months before starting production. Once production begins, Rockville sends product engineers to their factory to quality control every line of production. During production every product is tested and on top of that Rockville goes the extra mile and has their high level product engineers do an additional quality control. They test a certain percentage of all products from the production line a second time to ensure that the quality meets their vigorous standards, and to make sure that there is never a batch of products with even a slight problem. All Rockville products are backed with a hassle free warranty.
    • 8 Isolation pads
      
    • 8 Brass spikes
      
    • 8 Rubber spikes
      
    • 4 Cable clips
      
    • 4 Cable ties
      
    • 16 Screws
      
    • (2) Rockville RHTSC 36" Inch Bookshelf Speaker Stands Surround Sound Home Theater
    • Pair Rockville RHTSC high performance wood speaker stands
      
    • Finished with premium furniture-grade paint that will not crack, chip, or peel.
      
    • Made from high quality medium density fiber core to minimize resonance
      
    • Brass & Rubber spikes add stability to any floor surface
      
    • Isolation pads create a no-slip surface as well as improve acoustical performance
      
    • Empty body design allows you to add sand in order to increase the weight of the stands if needed
      
    • 60 lbs. load capacity allows you to use a heavier speaker without compromising stability.
      
    • Stands Height: 36"
      
    • Base plate size: 11.8" 9.25"
      
    • Top Platform size: 9.25" 7.28" (For smaller size speakers)
    • Top Platform size 2: 9.25" 11.8" (For larger size speakers up to 8")
      
    • Item Load weight capacity: 60 lbs.
      
    • Item weight per pair 25 lbs.
      
    • Shipping weight 29 lbs.
      
    • Color: Classic
      
    • Shipping dimensions 36” x 11.4” x 9.25”
      
    • Product dimension 11.8” x 9.25” x 36”  
    • Easiest and affordable way to improve your studio monitors sound
    • Decouples your studio monitors from desktops and monitor stands for accurate reproduction
    • Each package contains 2 Isolation Pads - enough for 2 studio monitors
    • 2-part angled design provides you with a wide range of tilt options, including flat, +/-4 degrees, and +/-8 degrees
    • Supports up to 100 lbs., so they can isolate a variety of studio gear
    • Handsome charcoal gray color
    • Rockville RRS190S: Monitor Isolation Pads
    • 3 Angle High Density Foam
    • 7.5" x 9.5"
    • High quality, High Density Foam
    • Eliminates vibrations and unwanted noises in your studio
      
    • Price is for (2) pads which accommodates (2) speakers