- (1) Focusrite Clarett 8Pre USB Audio Recording Interface w/ 8 Mic Preamps For PC+MAC
- (8) Rockville RMIC-SR Handheld DJ Vocal Recording Wired Microphone+Cables+Mic Case
Authorized Focusrite Dealer!
Video of Clarett 8Pre USB:
Description:
Between October 1st, 2020 and December 31,2020, Focusrite gives you The Hitmaker Expansion: Antares Auto-Tune® Access, Relab LX480 Essentials, and XLN Addictive Focusrite Special, for free! Register you can new Clarett on Focurite.com to access The Hitmaker Expansion.
Clarett USB lays down the challenge to interfaces twice the price. The Clarett USB range features specially designed high performance, low-noise (-128dB EIN) mic pres with a low distortion, ultra-linear design that guarantees a clean, open and transparent sound, giving accurate representation of the original performance. Boasting 119dB dynamic range, Clarett can now be experienced with any Mac® or PC supporting USB 2.0 and above.
The Perfect A-D and D-A Conversion
Decades of analogue circuit design experience, applied around 24-bit/192kHz A-D and D-A conversion, delivers a superior signal path. Hear your music sound better than you've ever heard it sound before.
Ins and Outs
Clarett 8Pre USB is an 18-in, 20-out audio interface. Six-segment LED metering easily shows the signal level of the eight mic/line inputs, two of which are also high-impedance instrument inputs that can record super-hot pickups with no unwanted distortion. MIDI I/O and S/PDIF I/O are also included. ADAT I/O allows you to expand your setup with up to eight extra inputs and outputs when combined with multi-channel mic preamps like Clarett OctoPre. Analogue outs include two monitor outputs with anti-thump technology, eight line outputs, two headphone outputs with volume controls, and a word clock output for sending clock signal to external devices.
The Sound of ISA
The eight Air-enabled mic preamps can reproduce the input impedance, clarity and frequency response curve of our original ISA mic preamp.
Super-Low Latency Recording
Clarett 8Pre USB connects to Mac® or PC using the included standard USB and USB Type-C™ cables. Record with super-low latency through amp simulators and effects plug-ins.
The Clarity of Clarett
The Clarett range is acclaimed for its sound quality. It's due partly to Clarett's specially-designed mic pres with the unique "Air" effect, adding air and clarity especially to vocals and acoustic instruments. Plus Focusrite's precision digital conversion, carefully balancing noise floor, dynamic range, frequency response and distortion for the best possible sound to and from your DAW.
Focusrite Control
Configure your routing and monitor mixes from Mac®, PC, iPad®, iPhone® or iPod touch® with user-friendly control software Focusrite Control
Included Software
- XLN Audio – Addictive Keys: one of four inspiring and interesting keyboard instruments
- Focusrite – Red Plug-in Suite: accurately models our classic Red 2 equaliser and Red 3 compressor
- Softube – Time and Tone Bundle: four of Softube's world-class reverb, delay, mastering and distortion plug-ins
- Focusrite – Plug-in Collective: exclusive offers, tutorial content and more, from some of the most innovative and prestigious plug-in companies
- Ableton® – Live Lite™: Industry leading music-making software
- Loopmasters: 2GB of royalty-free sample libraries
- Focusrite Control
Features:
- Focusrite CLARETT 8PRE 18-In/20-Out thunderbolt Audio/Midi Interface w/8 Preamps
- Eight Clarett mic preamps with Air Effect
- Accurate digital conversion and clocking
- Generous I/O, enough for the whole band
- Accessible metering and monitoring
- Works with Focusrite iOS Control
- Intuitive, easy-to-use software mixer
- Record and monitor in real time with your favorite DAW plug-ins
- Create custom monitor setups for both you and your artists
- Includes free download of Ableton Live Lite
- Includes Focusrite's Classic Red 2/Red 3 plug-in suite
- Focusrite's class-leading 24/192 conversion
- Up to 119dB of dynamic range
- Word clock output for slaving external digital devices
- 8 analog inputs, 10 analog outputs
- Stereo S/PDIF, 8 channels of ADAT I/O
- Two front-panel mic/line/instrument inputs
- 6-segment, multichannel LED meter
- Monitor level control, plus dim and mute buttons
- Two wide-dynamic-range front-panel headphone outs
- Mic Inputs
- Frequency Response: 20 Hz - 20 kHz +/-0.1 dB
- Dynamic Range: 118 dB (A-weighted)
- THD+N: 0.001%
- Noise EIN: –128 dBu (A-Weighted)
- Maximum input level: +18 dBu
- Gain Range: 57dB
- Line Inputs
- Frequency Response: 20 Hz - 20 kHz +/-0.1 dB
- Dynamic Range: 116 dB (A-weighted)
- THD+N: 0.005%
- Maximum input level: 26dBu
- Gain Range: 57dB
- Instrument Inputs
- Frequency Response: 20 Hz – 20 kHz ± 0.1 dB
- Dynamic Range: 111 dB (A-weighted)
- THD+N: 0.001%
- Maximum input level: +14dBu
- Gain Range: 57dB
- Line & Monitor Outputs
- Dynamic Range (Line Outputs): 119dB
- Dynamic Range (Monitor Outputs): 117dB
- Maximum Output Level (0 dBFS): +18 dBu, balanced
- THD+N: 0.0007%
- Headphone Outputs
- Dynamic Range: 112dB
- THD+N: 0.0008%
- Maximum Output Level: +16dBu
Click here for the Clarett 8Pre USB User Guide
Click here for the Focusrite Software User Guide
How to set up your RMIC-SR Microphone:
Video of RMIC-SR:
What's in the Box:
- Wired microphone
- (2) 100% OFC Copper Mic cables (XLR to ¼” + XLR to XLR )
- Mic clip
- Carry case
- Owner’s manual
- Warranty
Description:
The Rockville RMIC-SR is the same exact microphone we use in our Pro Mic Kit 1 microphone/stand bundle. This mic was created because we saw a need in the market for a high quality microphone at an affordable price. We found there were a lot of good mics around from reputable brands that sound great, but are very expensive. When we looked at the cheaper mics on the market from both reputable and entry level brands; we were not impressed at all. As a result we sent our very own product developers on a mic testing journey.
You may be asking yourselves, so what makes this mic sound so good? There are 3 main components that make a mic sound the way it does. The cartridge, the magnet, and the mic cable. Our microphone uses an M-56 cartridge which has a neodymium magnet. This combination of components supplies better sensitivity which means your mouth will not have to be on the mic for it to pick up the sound. Our components supply more than a great pickup pattern they also have very little background noise, and great tone.
We pay a lot of attention to detail. We could have saved a lot of money and got our cost down by including a cheap cable, but we know how important the cable is. We are very passionate about our products and we really have a lot of respect for our customers. For this reason alone we included 100 % OFC copper cables. There is no aluminum in this cable! It is Pure oxygen free copper. What this means is that the cable will last longer and will sound a lot better. You will get a distortion free signal. We use a true gauge mic cable with proper thickness.
The body of the microphone is also something we paid a lot of attention too. We did not want it to be too light and feel cheap. We made a nice solid metal microphone. It has a great feel to it. We could have gone with plastic or cheaper metal, but we wanted to go with a mic that we ourselves would want to use.
90 Day Money Back Guarantee including return shipping!
If within the first 90 days you are not 100 % satisfied for any reason, contact us and we will send you a return label and give you all your money back! (Item must be returned complete with all accessories and the original box please).
Microphone Features:
- M-56 Cartridge
- Full metal mic body
- Type: dynamic
- Neodymium magnet
- Polar Pattern: uni-directional
- Frequency Response: 80 - 13Khz
- Impedance: 600 Ohms ± 30%
- Sensitivity: -72 ± 3dB
Case Features:
- High quality plastic carry case protects the mic during transportation
- Comfortably holds microphone and mic cable
Cable Features:
- XLR to ¼” Cable
- XLR to XLR Cable
- 10 Feet each
- 100% OFC oxygen free copper
- Cable delivers crystal clear distortion free signal
- Cable is 5 MM thick with cover (22 AWG standard mic cable)
- XLR cable connectors are very solid and durable
Mic clip Features:
- Heavy Duty Standard Size Microphone Clip
- Stand Mountable
- Solid Plastic Construction with copper inside (part that screws to the mic)
- Black Color
- UPC:
- 613817027001
