- (1) Rockville RZL6 6.5" 600w Kick Panel Speakers For 2014-17 Polaris RZR 1000/900S
- (1) Rockville PS40 4 Channel ATV/UTV/Motorcycle Bluetooth Amplifier IP65 Micro Amp
- (1) Pair Rockville WB65KLS BLACK 6.5" 300w Metal Marine Wakeboard LED Tower Speakers
All About Your RZL6:
How to Set Up Your RZL6:
Includes:
- (2) RZR kick panel enclosures loaded with (2) 6.5" Marine Speakers
Description:
If you want the best sound for your RZR then this kick-panel enclosure and speaker package is for you. The enclosure is fiberglass and the speakers have extremely clear sound with good bass. We use a large 11 Oz magnet and top of the line components from start to finish. If you did a blind A to B test with our speakers and compare them to speakers that cost 2-3 times the price, you will like ours better. They have way more clear highs, tighter bass, and a higher sensitivity rating allowing them to play louder then our competitors’ speakers.
Features:
- Rockville RZL6 6.5" 600w Kick Panel Speakers For 2014-17 Polaris RZR 1000/900S
- Includes a pair of kick panel custom-fit speaker enclosures as well as a pair of 6.5” marine speakers that are custom tuned to the enclosures
- Fiberglass Construction enclosure
- Paintable
- Enclosure Dimensions: 2.56" Depth x 14.17" Length x 7.8” Height
- Peak power handling: 300 Watts per speaker / 600 Watts per pair
- RMS power handling: 75 Watts per speaker / 150 watts per pair
- Matte Black ABS Weather Resistant Grills
- Fully Marinized Against Salt & Fresh Water Conditions
- Molded ABS plastic speaker basket for amazing sound and protection from the elements
- Poly Injection Cone
- 11 Oz Y35 top of the line ferrite magnet supports high power handling
- Rubber Surrounds
- 1” PEI Neodymium Dome Tweeter
- Oversized 1” Kapton Voice Coil
- Pre-installed Stainless-Steel mounting screws included
- Impedance: 4-Ohm
- Frequency Response: 150Hz - 20KHz
- Sensitivity: 93dB @ 1w/1m
- Total Diameter: 7.17”
- Cutout Diameter: 5.75”
- Total Height: 3.82”
- Mounting Depth: 2.56”
Fits:
- RZR 900: Years 2015-2018
- RZR 4 900: Years 2015-2018
- RZR XP 1000: Years 2014-2018
- RZR XP4 1000: Years 2014-2018
- RZR XP Turbo: Years 2015-2018
- RZR XP Turbo Dynamix: Years 2018-2019
- RZR XP 4 Turbo Dynamix: Years 2018-2019
- RZR XP Turbo X/ XP 4 Turbo S: Years 2018-2019
All About Your PS40:
How To Set Up Your PS40:
Inputs, Outputs and Functions Explained on Your PS40:
Description:
The Rockville PS40 is a 4 channel amplifier that is perfect for any powersport application like UTV, ATV, motorcycle, etc. It will deliver 85 x 4 watts RMS @ 2 ohms. We dyno-test the amp to make sure you get the power we promise
This amp is IP65 which means even if you submerged it in water for a few seconds it will still function fine. This means you do not need to worry about your amp breaking when you spray down your vehicle. The amp also has waterproof silicone covers over the control panel and inputs to give additional protection.
The built-in Bluetooth is great because you do not even need a head unit or controller. You can just install this amp and wire it to your speakers and then Bluetooth your phone to the amp.
This amp is super compact making it easy to install into tight spaces.
If you want the most waterproof and high performing powersport amplifier on the market then the PS40 is a great option for you.
Features:
- Rockville PS40 4 Channel ATV/UTV Bluetooth Amplifier IP65 Waterproof Micro Amp
- Dyno Certified RMS Power Ratings: (Certified Dyno Test / Less than 1 % THD) (Use these ratings when comparing with top premium brands)
- 2 Ohms: 340 Watts (4 x 85 Watts)
- 4 Ohms: 200 Watts (4 x 50 Watts)
- 4 Ohm Bridged: 340w (2 x 170 Watts)
- Peak: (Use these ratings when comparing with the top budget brands such as Boss,
- Power Acoustik, etc)
- Peak 2 Ohms: 1350 Watts
- Built-in Wireless Bluetooth with Auto Pairing (You can run this amp without any receiver)
- IP65 waterproof rating
- Waterproof silicone covers on all inputs and control panel
- Conformal coated circuit board
- Anti-rust materials
- Micro Size amplifier can easily fit in tight spaces making it perfect for Motorcycles, UTV, ATV, etc
- Digital Class D Audio Topology
- Distortion (THD): ≤0.5%
- Independent Crossover Controls for CH1-2 and CH3-4
- Full Range/Low Pass/High Pass Crossover
- RCA Low level inputs and High Level Inputs (with Auto ON)
- Selectable LPF/FULL/HPF with Variable Crossover Frequency: 50Hz-250Hz
- Selectable 0/3/6dB Bass Equalizer
- Waterproof RCA Input
- Frequency Response: 20Hz-20KHz
- Signal to Noise Ratio: (1 Watt into 4 Ohms) ≥75dB
- Input Sensitivity: 0.5V-15V
- Stereo Separation: ≥45dB
- Fuse Rating: 30A
- High-Speed MOSFET Power supply
- Status Mode LED Indicator
- Dimensions (Inches): 7.56" L x 3.66" W x 2.07" H
Video of WB65KLS Product:
How To Set Up Your WB65KLS:
What's In The Box:
- Pair 6.5" marine wakeboard tower speakers with built in LED's
- Mounting brackets and mounting hardware
- Remote
- Installation hardware
- Rockville setup video to guide you through installation and usage
Description:
The WB65KLS 2-way marine wakeboard tower speakers with built in LED's by Rockville are great because they produce amazing bass, and clear highs in a compact enclosure that is perfect for your boat or your ATV.
You get a pair of 6.5" waterproof speakers in a stainless steel enclosure with a chrome grill. Each speaker is equipped with a 1" titanium dome tweeter and a 6.5" woofer. Each speaker can handle 150 watts RMS and 300 watts peak! The built in LED's are controlled through the included remote and you can toggle colors and programs.
Another simple feature we added is that we have speaker wire leads that are water-tight and sealed that come out of the enclosure. So when you install the unit you simply wire your speaker wires to the leads and seal it. This is the most secure and easy way to install marine speakers. If you were using terminals then the wire would be exposed to water getting in. We really put a lot of thought into every aspect of this product.
Rockville engineers care about quality and sound more than anything else. Our team did a blind A to B listening test with the WB65KLS VS a famous brand that cost way more money and our model had a huge edge in frequency response and sound clarity. The 1" titanium dome tweeters really make the high frequencies throw long distances. The highs on these speakers are crisp, clear, and extremely loud! The bass produced by the woofer is extremely impressive for a full range speaker. In our blind test we were shocked at how much better our speaker sounded then the hyped up famous brand.
The mounting brackets are made of aluminum and built to last. These brackets are light weight, durable and can withstand the toughest conditions. The bracket features a special UV coating to protect it from the elements. A 360 degree rotating mechanism built into the bracket allows you to position the speaker in any direction for optimum listening enjoyment. This also gives you the flexibility to rotate the speaker to the front or rear of your ride.
We use only marine grade components and materials making these speakers truly waterproof. They will not get damaged by fresh water, salt water, or moisture. In addition to wakeboard towers on boats, these speakers are versatile and are perfect for installing in Jeeps, ATVs, and UTVs. We were careful in the design process to make these shallow enough to support an ATV or UTV.
With the WB65KLS you get way more sound than what you pay for.
Features:
- Pair Rockville WB65KLS BLACK 6.5" 300w Metal Wakeboard Tower Speaker w/ Built in LED's
- Peak Power Handling per speaker: 300 Watts
- RMS Power Handling per speaker: 150 Watts
- Water-tight and fully sealed speaker wire leads make installation secure and quick (Way better than terminals)
- Frequency Response: 70Hz to 20kHz
- Sensitivity: 88 dB
- Impedance: 4 Ohm
- Black stainless steel enclosure
- Aluminum Mounting Bracket
- Quick and Easy Speaker Angle Adjustment
- Bracket rotates 360 degrees
- 1" Titanium Dome Tweeter
- Fully Marinized Against Salt & Fresh Water Conditions
- Completely Resistant to Water, Rust, and UV Rays
- Polypropylene Mica Injected Cone with Rubber Surround
- 10 oz High Density Magnet
- 1" Voice Coil
- CE and RoHS Certified
- These wakeboard speakers fit bars ranging from 1" to 2.5"
- This model is shallow enough to fit perfectly in an ATV or UTV
- Dimensions per speaker (H x W x D): 7.1" x 7.1" x 8.7"
- Weight per speaker: 5.1 lbs
- Color: Black
- UPC:
- 613826727978
