Package Includes:

• Pair Rockville RV65.2K 6.5" Component Kit Car Speakers
• Pair Rockville RV69.3 6x9" CEA Compliant 3-Way Car Speakers

---

 

Video of RV65.2K:

Description:

Rockville car audio speakers utilize the latest in speaker technology for superior sound quality. Our specially formulated Hexbass Cone Technology in combination with our Flexmotion Rubber Surround contribute to the speakers smooth extended response with minimal distortion for accurate reproduction of low end frequencies. The tweeters featured use high temperature PEI domes with neodymium magnets for smooth and extended high frequency sounds while the diffused PEI midranges offer outstanding sound dispersion contributing to the crisp clear midrange tones. The Rockville speakers are designed with superior SPL response so that they will play efficiently with stock head units but are powerful enough and capable of handling nominal amplifier power.

CEA Rated.
Rockville car audio speakers are CEA rated, what that means is that the Consumer Electronics Association recognizes these speakers to be accurately rated and meet their rigorous standards for wattage, SPL and frequency response. So while other manufacturers state “out-of-this-world” wattages on their products, you can rest assured that your Rockville speaker will work up to spec. and exceed your expectations.

What’ so special about Rockville Speakers “in engineering terms”.
The acoustic center of a driver is the point in the driver from which the sound appears to originate. What is crucial in a good multi-element design is the difference between the centers of the drivers. This is called relative acoustic offset. A good speaker design features phase accuracy in and around the crossover point, because the interaction of the drivers is most affected by the SPL magnitude and phase in this area. The Rockville designs allow for wide dispersion of the sound for complete musical immersion.

Audio power is the electrical power transferred from an audio amplifier to a loudspeaker, measured in watts. The electrical power delivered to the loudspeaker and its sensitivity determines the sound power level generated with the balance being converted to heat. Amplifiers are limited in the electrical energy they can amplify, loudspeakers are limited in the electrical energy they can convert to sound energy without distorting the audio signal or destroying them selves. These power ratings are important to consumers finding compatible products and comparing competitors. Because Rockville products are CEA rated, you can easily and accurately match any Rockville speaker to a CEA rated amplifier and be guaranteed of their performance match.

Features:

• Rockville RV65.2K 2-Way Component Speaker System
• 6.5" Two-Way High Fidelity Component Speaker System
• Peak Power Rating: 640 Watts per Pair / 320 Watts Each
• CEA Compliant RMS Rating: 160 Watts per Pair / 80 Watts Each
• Hex Base Technology Acrylic Speaker Cone
• Flex Motion Butyl Rubber Surround
• Linear Progressive Conex Spider
• Custom Molded Bullet
• 1" Silk Dome Tweeters with Neodymium Magnet
• Flush, Surface, and Angle Mount Tweeters
• Impedance Matching 12dB Two-Way Crossover Network
• Extended Frequency Response Speakers

Details:

• 30 oz. Magnet Structure Weight
• Impedance: 4 Ohm
• Cutout Diameter: 5.4"
• Mounting Depth: 2.25"
• Frequency Response: 60Hz - 20KHz
• Sensitivity: 91dB @ 1w / 1m
• Includes Complete Pair with Grills,  Installation Hardware, and Color Coded Speaker Wire

---

Video of RV69.3:

Description:

Rockville car audio speakers utilize the latest in speaker technology for superior sound quality. Our specially formulated Hexbass Cone Technology in combination with our Flexmotion Rubber Surround contribute to the speakers smooth extended response with minimal distortion for accurate reproduction of low end frequencies. The tweeters featured use high temperature PEI domes with neodymium magnets for smooth and extended high frequency sounds while the diffused PEI midranges offer outstanding sound dispersion contributing to the crisp clear midrange tones. The Rockville speakers are designed with superior SPL response so that they will play efficiently with stock head units but are powerful enough and capable of handling nominal amplifier power.

CEA Rated.
Rockville car audio speakers are CEA rated, what that means is that the Consumer Electronics Association recognizes these speakers to be accurately rated and meet their rigorous standards for wattage, SPL and frequency response. So while other manufacturers state “out-of-this-world” wattages on their products, you can rest assured that your Rockville speaker will work up to spec. and exceed your expectations.

What’ so special about Rockville Speakers “in engineering terms”.
The acoustic center of a driver is the point in the driver from which the sound appears to originate. What is crucial in a good multi-element design is the difference between the centers of the drivers. This is called relative acoustic offset. A good speaker design features phase accuracy in and around the crossover point, because the interaction of the drivers is most affected by the SPL magnitude and phase in this area. The Rockville designs allow for wide dispersion of the sound for complete musical immersion.

Audio power is the electrical power transferred from an audio amplifier to a loudspeaker, measured in watts. The electrical power delivered to the loudspeaker and its sensitivity determines the sound power level generated with the balance being converted to heat. Amplifiers are limited in the electrical energy they can amplify, loudspeakers are limited in the electrical energy they can convert to sound energy without distorting the audio signal or destroying them selves. These power ratings are important to consumers finding compatible products and comparing competitors. Because Rockville products are CEA rated, you can easily and accurately match any Rockville speaker to a CEA rated amplifier and be guaranteed of their performance match.

Features:

• Rockville RV69.3 3-Way Car Speakers
• 6" x 9" Open Basket 3-Way Speaker
• Peak Power Rating: 800 Watts per Pair / 400 Watts Each
• CEA Compliant RMS Rating: 200 Watts per Pair / 100 Watts Each
• HEX Base Technology Acrylic Speaker Cone
• Flex Motion Butyl Rubber Surround
• Linear Progressive Conex Spider
• 1" Neo PEI Polyamide Dome Tweeter
• 2" PEI Polyamide Acrylic Cone Midrange
• Built-in Capacitor Crossover Network
• Extended Frequency Response Speakers

Details:

• 70 oz. Magnet Structure Weight
• Impedance: 4 Ohm
• Cutout Diameter: 8.5" x 6"
• Mounting Depth: 3.3"
• Frequency Response: 55Hz - 20KHz
• Sensitivity: 92dB @ 1w / 1m
• Includes Complete Pair with Grills,  Installation Hardware, and Color Coded Speaker Wire