- (1) Rockville RCS180-6 180 Watt 6 Zone 70v Commercial/Restaurant Amplifier/Bluetooth
- (1) Pair of JBL CONTROL 26CT 6.5" 60w 70v Commercial Ceiling Speakers For Restaurant/Bar
How to Set up Your RCS Series of Amplifiers:
Video of RCS180-6:
Includes:
- Amplifier
- Remote
- Rack mount ears
- Power Cable
- FM Radio antenna
- Owner’s manual
- Warranty
Description:
What is 70 volt ?
Applications:
- Restaurant
- Bar
- Café
- School
- Lounge
- Home (Multi-zone, Multi-room)
- Office
- Warehouse
Features:
- Rockville RCS180-6350 Watt commercial/restaurant amplifier 19" rack mountable (removable rack brackets) digital hybrid amplifier/receiver
- Capable of 70 volt, 100 volt, 8ohm, and 4 ohm
- 70/100 volt RMS Power: 184 Watts
- 4-16 ohm binding post speaker output
- 6-Zones of speaker outputs - each zone has a separate volume control
- 70 and 100 volt binding post outputs for single zone playback of all 180 watts
- Built in Bluetooth audio streaming
- FM radio tuner
- USB input to play audio stored on a thumb drive (32gb max)
- SD card slot to play music stored on an SD Card (32gb max)
- Separate volume control for MIC1, MIC2, MIC3, MP3, LINE1, LINE 2, and MP3
- Echo control for the mic inputs with speed and repeat adjustments
- Built in clipping limiter to protect the amp and speakers
- BASS and Treble control
- Detachable euro-block speaker output terminals for easy installation
- Chime button for making announcements
- Top quality aluminum panel with industrial grade knobs
- 5 segments signal level indication
- Built in cooling system keeps component cool at all times
Inputs and Outputs:
- (2) Sets RCA AUX inputs
- (3) Mic inputs
- RCA Line output
- Optical input
- Detachable euro-block speaker output terminals for easy installation
- 100V speaker red positive speaker output terminal
- 70V speaker red positive speaker output terminal
- 8 Ohm red positive speaker output terminal
- Shared negative speaker output terminal
Specifications:
- Power Requirements: 120V / 50-60Hz
- A Weighted Signal to Noise (@ 1W) -68.1dBA
- A Weighted Signal to Noise (referenced to full 4 ohm power) -89.2dBA
- Frequency response: 49Hz to 14.9 Khz
- Frequency Response VS THD+M (worst case across normal bandwidth 1W @ 8 Ohms: 0.89%
- Weight: 22.7lbs
- Dimensions: 19” x 16” x 4” inches
Authorized JBL Dealer!
Description of CONTROL 26CT RB:
Capable of high power handling and low distortion, JBL's ceiling mounted Control 26CT is ideal for upscale installs. Its performance ability ensures balanced sound throughout the listening area.
The Control 26CT's 16 Ohm impedance allows the user to connect multiple speakers in parallel without having to use more expensive constant voltage distribution systems. The unit includes a multitap transformer for 70V/100V systems. The computer-optimized enclosure insures smooth bass response and JBL's exclusive SonicGuard protects speakers from overload.
The Control 26CT offers a very broad 110° area of coverage and is designed for longer, cooler operation, which allows for greater long-term power handling. A simpler and less-expensive install is achieved due to the coverage capability of the Control 26CT.
Features:
- (2) JBL CONTROL 26CT 6.5" 60w 70V/100V Ceiling Speakers For Restaurant/Bar
- 140 Watts power capability
- Multi-tap transformer for 70V/100V systems
- 75Hz to 20kHz frequency range (-10dB)
- 16 Ohm load
- Coaxially mounted 6.5 in. (165mm) woofer with butyl rubber surround and 3/4 in. (19 mm) titanium coated diffraction-loaded tweeter.
- High power, wide frequency response and low distortion for high sound level capability.
- Wide coverage allows for fewer speakers, reducing the cost of the installed sound system without sacrificing performance.
- JBL's exclusive SonicGuard overload protection allows higher operational levels and improved system reliability (26C only)
Specifications:
- Active or Passive: Passive
- Frequency Response: 75Hz to 20kHz
- Power Capacity: 150 Watts Program 75 Watts Pink Noise
- Maximum Sound Pressure Level (SPL): 107dB @ 1m (3.3 ft)
- Nominal Sensitivity: 89dB SPL, 1W @ 1m (3.3 ft)
- Transformer Taps: 70 V taps: 60W, 30W, 15W, 7.5W 100 V taps: 60W, 30W, 15W
- Impedance: Not applicable
- Crossover: Not applicable
- Shielded: Not applicable
- Low Frequency Driver: 6.5 in. (165 mm) Polypropelene-coated, 1" coil on aluminum former
- High Frequency Driver: 3/4 in. (19 mm) Titanium coated polyester
- Enclosure Material: Formed steel can with medium impact polystyrene baffle/rim, fire rated UL94V-0
- Input Connections: Removable locking connector with screw-down terminals. 2 input terminals and 2 loop-thru output terminals. Max. wire 12 AWG (2.5 mm2)
- Environmental: In accordance with IEC60849 / EN60849. Suitable for use in air handling spaces, per U.L.-2043, U.L.-1480, NFPA90, NFPA70A
- Dimensions: 8.3 x 9.9 in. (210 x 252 mm) 7.5 in. (190 mm) front of ceiling tile to back of back can
- Weight: 7.5 lbs. (3.4 kg) CT: 10 lbs. (4.2 kg) each
- Specialties: Multi-tap transformer for 70V and 100V systems
- Package Weight: 20.8 lb
- Box Dimensions (LxWxH): 26.5 x 12.0 x 11.5"
- UPC:
- 613816439973