Package Includes:
- (1) Audio Technica PRO 35 Cardioid Condenser Clip-On Instrument Microphone
- (2) Rockville RCGT20B 20' Nickel-Plated 1/4" TS to 1/4" TS Guitar / Instrument Cables
Description of PRO 35:
Designed for sax, toms, brass and percussion, the PRO 35 excels in high-SPL applications and is ideal for active stage performances. Its extended frequency response captures subtle nuances of the performance. The included UniMount clip permits accurate positioning and provides shock resistance while protecting the element. The microphone’s cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of the desired sound source.
Features:
- PRO 35 Cardioid Condenser Clip-on Instrument Microphone
- UniMount clip permits accurate positioning, provides shock resistance and protects element
- Cardioid polar pattern
- Extended frequency response
- 6' (1.8 m) cable permanently attached to microphone
- Element: Fixed-charge back plate, permanently polarized condenser
- Polar Pattern: Cardioid
- Frequency Response: 50-15,000 Hz
- Low Frequency Roll-Off: 80 Hz, 18 dB/octave
- Open Circuit Sensitivity: -45 dB (5.6 mV) re 1V at 1 Pa
- Impedance: 250 ohms
- Maximum Input Sound Level: 145 dB SPL, 1 kHz at 1% T.H.D.
- Dynamic Range: (typical) 115 dB, 1 kHz at Max SPL
- Signal-To-Noise Ratio: 64 dB, 1 kHz at 1 Pa
- Phantom Power Requirements: 11-52V DC, 2 mA typical
- Switch: Flat, roll-off
- Weight: (Microphone) 0.3 oz (8 g)
- Weight: (Power Module) 2.9 oz (81 g)
- Dimensions: (Microphone) 0.98" (25.0 mm) long, 0.40" (10.2 mm) diameter
- Dimensions: (Power Module) 3.66" (92.9 mm) long, 0.74" (18.9 mm) diameter
- Output Connector: (Power Module) Integral 3-pin XLRM-type
- Cable: 6.0' (1.8 m) long (permanently attached to microphone), 0.10" (2.6 mm) diameter, 2-conductor, shielded cable with TA3F-type connector
- Accessories Included
- AT8418 UniMount microphone instrument mount
- AT8538 power module
- Soft protective pouch
Video of RCGT20B:
Description:
Authorized Rockville Dealer!
All
Rockville pro audio cables are made with 100% copper which boosts
the efficiency of the cable. There is nothing better than 100% copper.
Most of the cheaper cables on the market do not use 100% copper, instead
they make their cables with CCA (Copper Clad Aluminum). CCA cables do
not perform on the level that 100% copper cables perform at. CCA will
not conduct signals efficiently. A 12 gauge CCA cable will not even
perform as well as a 14 gauge 100% pure copper cable, which will in
turn, affect the performance and longevity of your equipment. If you
find cables on the market that do not mention the copper content, there
is a good chance that they are selling you a cheaper cable that is CCA
and not 100% copper. Rockville pays an inspection company to oversee
the manufacturing of the product to ensure that we provide a 100% Oxygen
Free Copper Cable (OFC). Our OFC cables are less prone to oxidation,
and will provide maximum signal transfer.
The other important
factor of a cable is the shielding. Most of the good brands on the
market have about 85% shielding coverage, so we decided to take
our shielding a step further. Rockville cables are shielded with a tight
copper mesh, covering 90% of the cable! The high percentage of coverage
increases the ability to absorb the Electromagnetic Interference (EMI)
and Radio Frequency Interference (RFI) that suppresses signal and
degrades the performance of equipment. Rockville Cable’s copper
shielding provides great flexibility, maintains a durable structural
integrity, while decreasing signal interference ensuring enhanced signal
clarity with every use.
- Rockville RCGT20 1/4'' TS to 1/4'' TS Guitar / Instrument Cable
- 24 AWG 100% Copper Conductors for Enhanced Signal Clarity
- Nickel Plated, 1/4" Straight-to-Same Connectors
- High Density 90% Coverage OFC Braid Shield for Superior EMI and RFI rejection
- Length: 20 Ft
- Color: Black
- UPC:
- 613816136445
