• (1) Pair of MB Quart NKF692 6x9" 260w 2-Way Nautic Series Pair Of Marine Boat Speakers
• (1) Pair of Rockville 6x9 Polished Silver Aluminum Wakeboard Tower Speaker Enclosures
• (1) Pair of MB QUART NKF116 6.5" 100W 2-Way Nautic Marine Boat Audio Speakers White
• (1) Pair of Rockville 6.5" Polished Silver Aluminum Wakeboard Tower Speaker Enclosures
• (1) Rockville RXM-S6 Marine/Boat 6 Channel Amplifier 2600 Watt Peak / 1300w RMS
• (1) Rockville RMWK4 4 AWG Waterproof Marine/Boat Amplifier Installation Wire Kit
• (2) Rockville MRCA20 20 Foot Twisted Pair Marine RCA Cables

Features of NKF692:

• 6" x 9" 2-way MB Quart NKF Marine Speakers
• Peak Power Handling Per Pair: 260 Watts
• Peak Power Handling Each: 130 Watts
• RMS Power Handling Per Pair: 120 Watts
• RMS Power Handling Each: 60 Watts
• Polypropylene cone
• 1" Titanium coated tweeter
• Nautic crossover with special protective sealing lacquer
• Gold-plated terminals to resist corrosion
• Voice-coils protected against direct water spray
• Sealed solder joints

Specifications:

• RMS Power Ratings: 60 Watts each
• Peak Power Ratings: 130 Watts each
• Impedance: 4 Ohms
• Sensitivity: 86 dB
• Frequency Response: 65-25,000 Hz
• 2 Titanium Coated Tweeter: 19mm/0.75"
• 2 Polypropylene Woofer: 165mm/6.5"
• Top-mount depth: 3-1/4"

Video of MAC69S:

Includes:

• 2 Wakeboard Cans
• All mounting hardware
• (2) 2.375” rubber inserts
• (2) 2.25” rubber inserts
• (2) 2.5” rubber inserts
• (2) 2” rubber inserts

Rockville is proud to introduce our all new line of aluminum wakeboard cans. The MAC69S comes in pairs and includes our rugged universal aluminum clamp for easy installation to any wakeboard tower pole measuring from 2" to 2.5" diameter.  Six precision molded high impact rubber inserts guarantee fitment on towers from 2” to 2.5”. Our clamp inserts are precision-fitted to sit perfectly inside the metal clamps. The speaker terminals are safely enclosed inside the waterproof speaker canister.
***Please note if you need an insert to accommodate a 1.75" diameter tube please let us know and we will send one out to you free of charge!

These awesome pods are built of hand polished super strong aircraft grade 6061 aluminum. They are fully marinized which means they’ll withstand the elements on the water. These cans are 100 % waterproof. What makes our technology the best on the market is that our pods are internally wired! This means the terminals are inside the pod and the wires are fed through pre-drilled holes on the pod and clamp. Simply align the wire opening with the hole on your tower and you are done! No exposed wires or terminals! Aluminum cans will last forever!

The sound quality of these are phenomenal! These are the perfect amount of air space to give you the perfect sound quality with the leading marine speakers on the market from brands like Kicker, Rockford Fosgate, etc. Our high efficiency design means more audio output from the same speakers! This means you get louder, cleaner sound with less distortion using our wakeboard enclosures than with other brands.

Features:

• Pair of Rockville MAC69S polished chrome aluminum can wakeboard tower enclosures
• Made of high quality 6061 aircraft grade aluminum
• Hand polished for beautiful chrome finish
• 100% waterproof and fully marinized against salt and fresh water conditions
• Internally wired for clean install—no exposed wires or terminals
• High efficiency design features the perfect airspace for 6 x 9” speakers
• Rugged universal mounting clamps made of 6061 aluminum
• Includes precision molded, high impact plastic inserts for tower fitment from 2” diameter to 2.5” diameter

An award winning, marine certified premium 6.5" coaxial speaker for boat, RV and off-road vehicle audio installations. The speakers feature water resistant midrange cones, titanium tweeters and rust resistant connectors.  

Features:

• Pair MB QUART NKF116 6.5" 100 Watt 2-Way Nautic Marine Boat Audio Speakers White
• Marine Certified - Longer life against harsh conditions. Protected against sun fade with UVA paint coating. Conformal coated crossover components protect against fresh and salt water spray as well as dust and sand
  
• IPX67 - Tested to the highest Marine and Motorsports standards for resisting the elements
  
• Titanium Dome Tweeter - Very smooth musical response, high output with minimal required amplifier power
  
• 6.5" Composite Poly Midrange - UVA Protected, water resistant composite polypropylene cone with temperature stable Butyl rubber surround mounted on a lightweight composite frame
  
• High Temperature Voice Coil and Former - Voice coil is high temperature copper, wound on a Kapton former which allows the voice coil to handle more power while remaining light in weight
  
• High Energy Y30 Motor assembly - High energy strontium ferrite magnet for higher output with minimal amplifier power
  
• Marine Certified Crossover - Conformal Coated, Butterworth 12dB per octave crossover with PTC (Positive Thermal Coefficient) tweeter protection

Specifications:

• Certifications: IPX67, Conformal Coated, UVA Certified, CEA426B
  
• RMS Power Handling (CEA426B): 50 watts per speaker
  
• Peak Power Handling (CEA426B): 100 watts per speaker
  
• Impedance: 4 ohm
  
• Frequency Response +/- 10dB: 65-25kHz
  
• Sensitivity (1 watt/1 meter): 86dB
  
• Mounting Diameter: 5.59" (141.9mm)
  
• Mounting Depth: 2.5"

Video of MAC65S:

• 2 Wakeboard Cans
  
• All mounting hardware
  
• (2) 2.375” rubber inserts
  
• (2) 2.25” rubber inserts
  
• (2) 2.5” rubber inserts
  
• (2) 2” rubber inserts
  

Rockville is proud to introduce our all new line of aluminum wakeboard cans. The MAC65S comes in pairs and includes our rugged universal aluminum clamp for easy installation to any wakeboard tower pole measuring from 2" to 2.5" diameter.  Six precision molded high impact rubber inserts guarantee fitment on towers from 2” to 2.5”. Our clamp inserts are precision-fitted to sit perfectly inside the metal clamps. The speaker terminals are safely enclosed inside the waterproof speaker canister.
 
These awesome pods are built of hand polished super strong aircraft grade 6061 aluminum. They are fully marinized which means they’ll withstand the elements on the water. These cans are 100 % waterproof. What makes our technology the best on the market is that our pods are internally wired! This means the terminals are inside the pod and the wires are fed through pre-drilled holes on the pod and clamp. Simply align the wire opening with the hole on your tower and you are done! No exposed wires or terminals! Aluminum cans will last forever!

The sound quality of these are phenomenal! These are the perfect amount of air space to give you the perfect sound quality with the leading marine speakers on the market from brands like Kicker, Rockford Fosgate, etc. Our high efficiency design means more audio output from the same speakers! This means you get louder, cleaner sound with less distortion using our wakeboard enclosures than with other brands.

Features:

• Pair of Rockville MAC65S polished chrome aluminum can wakeboard tower enclosures
  
• Made of high quality 6061 aircraft grade aluminum
  
• Hand polished for beautiful chrome finish
  
• 100% waterproof and fully marinized against salt and fresh water conditions
  
• Internally wired for clean install—no exposed wires or terminals
  
• High efficiency design features the perfect airspace for 6.5” speakers
  
• Rugged universal mounting clamps made of 6061 aluminum
  
• Includes precision molded, high impact plastic inserts for tower fitment from 2” diameter to 2.5” diameter

*Although the pre-drilled holes will accommodate most speakers on the market, there may be some that don't fit. If that is the case you can drill holes into the lip of the can to line up with your speaker's mounting holes.

Video of RXM-S6:

Includes:

• Amplifier
• PA Microphone
• Bass Remote
• Mounting Screws

Description:

Over the years, the technology used to create audio amplifiers has grown by leaps and bounds. We consider it our mission to use our expertise in developing the latest technologies and to bring you the absolute best sounding amplifiers on the market at a reasonable price. From its clean, sleek design to its high quality components, you will be amazed at the quality and power that these new Phenom amps offer.

Before we talk about the actual amplifier, I wanted to point out that we included a microphone. Most brands do not do this. We wanted to provide you guys with the best sounding marine amplifier of course. But we also wanted to give you the ability to have a microphone so you can use all the power of the system to communicate when out on the water. This will give you many new applications of what you can use your marine system for. We included a special circuitry in the amplifier that when you talk through the microphone the music will get lower and when you are done talking the music will go back to normal volume.

The RXM-S6 is a 6 channel amplifier with 2,600 Watts peak output and 780 Watts RMS(6 x 130 @ 4 Ohms). You can also bridge the amplifier and get 3 x 440 Watts RMS @ 4 Ohms. Here at Rockville we offer the best value in car audio. We therefore want to make it easy for you to compare our products to any brands on the market. The peak rating can be used to compare with brands who use peak ratings such as Boss and Power Acoustik while the Dyno Certified RMS rating can be used to compare with top brands such as Kicker, Rockford, Alpine, etc.

This 6 Channel marine amplifier is amazing. It gives you amazing options for your marine speakers and/or subwoofers. Here are some wiring configurations. You can run 4 channels to (4) full range speakers, and then 2 of the channels to (2) subwoofers. You can also run those last 2 channels to wakeboard speakers if you wanted.

You can also run 2 speakers to each channel and connect for a total of 8 speakers to the 4 channels, and then you still have 2 channels left for your subwoofer(s). Another option would be to connect 12 full range speakers.

You can bridge any of the 2 channels together which means you can run this is a 6 channel, 3 channel, or 4 channel amplifier. So if you need 1 channel to have double the power, you can just bridge 2 channels into 1 and double the power.

The RXM-S6 has a conformal coating on its PCB (printed circuit board) in order to protect against moisture, dust , chemicals, and temperature extremes. This coating protects the amplifier from the elements of the ocean. If water gets sprayed on the amplifier you will not have to worry. The exterior screws are made of stainless steel to better withstand the elements. This amplifier is fully marine-rated from start to finish.

One of the tricks to determine the real power of a car amplifier is to multiply the fuse rating by 10 to determine the true RMS power. This formula almost always works within 20%. RXM-S6 features (2) 60 Amp Maxi Fuses. Compare this to other amps on the market with similar fuse ratings and you’ll see that with the RXM-S6 you are getting your money’s worth and then some.

This unit also features a high speed MOSFET power supply, studio-grade bipolar output stage transistors and ELNA brand audiophile capacitors. It has a fully adjustable 12dB/Octave cross over with differential circuitry. This also has pre-amp inputs allowing you to install the amplifier to the pre-amp output of your receiver or you can get the signal to the receiver through the speaker level inputs.

Other features include Auto-Start Smart turn-on (This function senses when there is a signal from the head unit and automatically turns on the amplifier hence no need to run a Remote Turn-On wire), a fully adjustable 12dB bass equalizer, 2 ch/ 4 ch/ 6 ch input mode switch, mute and delay soft start technology, and a crossover band-pass control. The RXM-S6 is protected by a full IC controlled circuit and has professional peak limiter circuitry guaranteeing distortion free musical playback at all levels.

We are so confident that you will be extremely satisfied with this amplifier that we are giving every customer a 90 day money back guarantee. So purchase the amplifier and try it for 90 days. If you are not happy, we will call tag it and cover return shipping costs and refund you all your money back. (Amp must be complete with accessories and original box please).

Features:

• Rockville RXM-S6 Marine/Boat 6 Channel Amplifier 2600 Watt Peak / 660w Dyno-Certified RMS With Status Mode LED Indicator
• Dyno Certified RMS Power Ratings: (Certified Dyno Test / Less than 1 % THD) (Use these ratings when comparing with top brands such as Kicker, Rockford Fosgate, etc)
  
  • 420 Watts (6 x 70 Watts) at 4 ohms and 1% THD+N
  • 660 Watts (6 x 110 Watts) at 2 ohms < 1% THD
  • 660 Watts (3 x 220 Watts) bridged @ 4 Ohms < 1% THD
• Peak: (Use these ratings when comparing with the top budget brands such as Boss, Power Acoustik, etc): 2600 Watts (6 x 440 @ 2 ohms or 3 x 880 @ 4 Ohms)
• High-Speed MOSFET Power Supply
• Studio-Grade Bipolar Output Stage Transistors
• Fully Adjustable 12dB / Octave Crossover with Differential Circuitry
• CH 1 - 6
• Low Pass 50Hz - 250Hz
• High Pass 50Hz - 250Hz
• Full IC-Controlled Protection Circuitry
• Fully Adjustable Bass Equalization Control
• 2 Ohm Stable Stereo
• 4 Ohm Mono Bridgeable
• 3 Channel Mixed-Mono Capable@ 4 Ohm
• 2 CH / 4 CH/ 6 CHInput Mode Selector
• Mute and Delay Soft Start System
• Remote Dashboard Subwoofer Control
• 8 Volt Preamp Circuitry
• ELNA Brand Audiophile Quality Capacitors
• Status Mode LED Indicator
• Frequency Response: 10Hz - 40KHz
• Minimum THD at Rated Power: < 0.05%
• S / N Ratio: > 100dB
• Damping Factor: > 200 @ 100Hz
• Dual 60 Amp Maxi Fuses
• Dimensions: (W x H x L) 8.66" x 2.09"x 16.14"

Owner’s Manual

About Rockville Quality Control Procedures:

Video of RMWK4:

Unboxing Video of RMWK4:

Rockville's exclusive Professional Marine Installation Kit features top of the line accessories which have been specifically engineered to withstand the toughest of marine environments. You will hear the difference and we guarantee you will not be disappointed!

Rockville Marine Audio Interconnect cables are specifically engineered to withstand the challenges of both salt water and fresh water marine installations. The utilization of tinned Oxygen Free 100% copper conductors with polyethylene dielectrics in a twisted-pair arrangement optimizes noise rejection. The small-diameter white PVC jacket is ultra-flexible enabling our cables to be easily routed around bends and through tight spaces. Our exclusive molded connector features a water proof inner cap that is heat shrunk in place over all solder connections thus guaranteeing a completely water proof and corrosion resistant connection. The locking plug design with split pin technology further insures tight connections that will not vibrate free even during the most extreme boating maneuvers.

Our Marine Grade Speaker Cables are engineered for maximum signal transfer with minimum impedance loss. The cable strands are all individually tinned, fine-strand, oxygen-free copper with aluminum composite construction and provide a high-fidelity speaker connection that is especially engineered for the marine environment. Woven down to a flat shape, the cables can be easily routed throughout the bulkhead with ease.

Rockville Marine Power Cables feature strands which are all individually tinned, fine-strand, oxygen-free copper with aluminum composite construction corrosion resistant and marine-ready. Fine-strand construction and soft PVC jacket deliver excellent flexibility. Our marine cables are much better quality than standard CCA wire kits. These kits have a very generous amount of copper in them. They are very similar in quality to the best brands kits on the market. The thickness of the wire is true-gauge. We have seen other brands who use thick plastic but very little copper inside the wire. Rockville wires are honest, true-to-spec and will make your music sound great.

Features:

• Rockville RMWK4 4AWG Guage Waterproof Marine/Boat Amplifier Wire Installation Kit
• 25’ Translucent, Twisted Pair, High Quality, Tinned-CCA Flexible PVC RCA Cable
• 20’ 4 Gauge High Current, Low Impedance, Clear Flexible Power Cable with 3’ Black Poly Woven Mesh to better resist chemicals in the battery compartment
• 4’ 4 Gauge High Current, Low Impedance, Light Blue, Flexible Ground Cable
• 25’ 16 Gauge 100% Tinned-OFC, White, Non-Transparent Resin PVC, Flat Speaker Cable
• 20’ Blue Remote Wire
• 1PC Silver Mini-ANL Fuse Holder – Clear Shell and Clear Blue Bottom Bracket with Blue Waterproof Ring
• 1PC 60A Mini-ANL Fuse
• 2PCS Ring Terminals
• 2PCS Spade Terminals
• 5PCS Speaker Cable Terminals
• 1PC Washer
• 10PCS White Cable Ties

Rockville marine audio interconnect cables are specifically engineered to withstand the challenges of both salt water and fresh water marine installations. The utilization of tinned OFC copper conductors with polyethylene dielectrics in a twisted-pair arrangement optimizes noise rejection. The small-diameter white PVC jacket is ultra-flexible enabling our cables to be easily routed around bends and through tight spaces. Our exclusive molded connector features a water proof inner cap that is heat shrunk in place over all solder connections thus guaranteeing a completely water proof and corrosion resistant connection. Our locking plug design with split pin technology further insures tight connections that will not vibrate free even during the most extreme boating maneuvers.

Features:

• Rockville MRCA20 RCA Interconnect Cable
• 20’ Ultra-Flexible PVC Shield
• Twisted Pair
• Premium Audiophile Marine RCA Interconnect Cable
• High Performance Water Proof RCA Plugs
• Tinned Copper Strands for Sonic Purity
• Outstanding Noise Rejection, Accuracy, and Frequency Response