Package Includes:
- (1) Eliminator ADJ MEGA 64 PROFILE EP DMX RGB+UV LED Club DJ Par Can Wash Up-Light
- (1) Rockville RDX3M25 25 Foot 3 Pin DMX Lighting Cable 100% OFC Copper Female 2 Male
- (1) Rockville LC70 Heavy Duty C Clamp - Mount Light Up to 70 LBS, Adjustable Knob
What's In The Box:
- 1x Mega 64 Profile EP LED par can
- Includes scissor yoke to hang on truss, mount on a wall or set on the ground
- Power Cable Length: 1.8 meter (IEC)
Description:
The Eliminator Lighting Mega 64 Profile EP is a low profile LED Par with 12x 4W Quad LED (RGB+UV) designed for uplighting, stage lighting and wall washing. With a 25-degree beam angle and 64 built-in color macros, the Mega 64 Profile EP is great for permanent or portable lighting solutions to create smooth swaths of vibrant color.
The Eliminator Lighting Mega 64 Profile EP is a compact, low profile LED wash fixture designed for uplighting, stage lighting and wall washing, and will bring color and excitement to smaller sized events or small stage performance. The Mega 64 Profile EP is powered by twelve bright 4-Watt Quad (RGB+UV 4-In-1) LED and offers a unique, more vibrant color palette with the UV LEDs than traditional RGB fixtures.
This Par is intelligently designed so that it may sit directly on the ground or inside truss without the hanging bracket because the power & DMX Ins and Outs sit on the side of the fixture, not on the rear. Its feet and scissor yoke allow for maximum lighting versatility to be used as a floor wash or hung from truss or pipe.
The Mega 64 Profile E offers smooth color mixing with no RGB+UV shadows, has a 25-degree beam angle and has 5 DMX Channel modes for a variety of programming options. Users can also use the ADJ LED RC2 wireless remote, which is sold separately, to control the Mega 64 Profile EP.
Features:
- Smooth RGB Color Mixing (fast or slow color change operation) with no RGB+UV shadows
- Power & DMX Ins/Outs are intelligently designed to sit sideways so the unit can be set flat on the ground
- Great as an architectural wall wash or for performance stages where traditional stage lighting emit a lot of heat onto performers
- Flicker Free
Specifications:
Source:
- 12 x 4W Quad (RGB+UV 4-IN-1) LEDs
- Light Output: 3,520 LUX @ 2M; 820 LUX @ 4M (25-degree beam)
Control:
- DMX-512 protocol
- 5 DMX Channel Modes: 4/5/6/9/10 Channels
- 5 Operational modes: RGB+UV Dimmer Mode, Sound Active Mode, Auto Run Mode (16 Color Change Programs, 16 Color Fade Programs, & Color Change & Fade Combination),
- Static Color Mode, & DMX Controlled
- Stand Alone or Primary/Secondary Configuration
- 4-Button DMX LED Display
- 64 built-in Color Macros
- Refresh Rate: 504Hz
- Electronic Dimming: 0-100%
- LED Pulse and strobe effect
Connections:
- Linkable via 3-pin XLR cable
- Power: IEC In/Out to daisy chain power (Link up to 12 Mega 64 Profile Plus fixtures)
- With Wired Digital Communication Network
Electrical:
- Multi-voltage Operation: AC 100 - 240V, 50/60Hz
- Power Draw: 54W Max
- Fuse: 2Amp
Dimensions & Weight:
- Dimensions (LxWxH): 10.5” x 10.25” x 4.5”/ 261 x 260 x 110mm
- Weight: 5 lbs./ 2.1 kg.
Video of RDX SERIES:
Description:
Rockville High Performance Cables are designed to provide efficient signal transfer for every application. Our Nickel-Plated, OFC (Oxygen-free copper) conductors assure that you have enhanced signal clarity with every use. Shielded for Superior EMI and RFI rejection, Rockville High Performance Cables are an ideal choice for all your lighting connection needs.
True, real DMX cables must be 120 ohms. Rockville DMX cables meets this specification.
Microphone cables are a lower impedance (ohms), and the difference in capacitance and twisting ratio makes it terrible for DMX signals.
Be sure to buy true 120 ohm DMX cables from reputable brands such as Rockville, Chauvet, American DJ.
Features:
- Rockville RDX3M25 Black Nickel Plated 3-Pin Male-Female DMX Cable
- OFC Conductors for Enhanced Signal Clarity
- XLR Connectors with Internal Strain Relief for Rugged Reliability
- Hi-density OFC Braided Shield for Superior EMI and RFI Rejection
- Impedance: 120 Ohm
- Length: 25 Ft
How To Set Up Your LC70:
Description:
Rockville LC70 lighting clamp supports lights up to 70 pounds!
The Rockville LC70 is a clamp that allows you to mount your lights onto any truss ranging from 1 to 2 inches in diameter. It can handle any light up to 70 pounds! These are the best quality clamps on the market. They are made of steel for extra strength and durability.
Features:
- Rockville LC70 Heavy Duty C Clamp - Mount Light Up to 70 LBS, Adjustable Knob
- Load capacity: 70 lbs
- Fits: 1" to 2" truss
- Weight: 0.9 lbs
- Dimensions: 5.4" x 3.8" x 1.5" (137mm x 97mm x 38mm)
