- (1) Mackie PPM1012 12 Channel 1600 Watt Powered Mixer, 32 Bit FX
- (1) Rockville RXS20 Portable Mixer Stand
- (10) Rockville RCXFM20E-B 20 Foot Female to Male XLR Mic Cable Black 100% Copper
- (1) Audio Technica ATH-M50X Over Ear Professional Studio Monitor Headphones
Authorized Mackie Internet Dealer!
Video of MACKIE PPM1012:
Product Summary:
- Full-featured 12-Channel, 1600W Powered Desktop Mixer with 4-segment LEDs and solo PFL on every channel
- 800W + 800W Mackie designed Class-D, Fast Recovery™ power amplifiers
- 32-bit dual RMFX+™ processor featuring 24 “Gig Ready”, useable reverbs, choruses, and tap delay for live applications
- 8 mic/line mono inputs and 2 stereo line inputs for flexible connectivity
- Mackie high-headroom, low-noise mic preamps with RF rejection for pristine signal
- New Dedicated In-line Compression provides increased presence and punch for vocals and instruments
- Mackie’s 3-Band Active channel EQ with a Mid sweep (100Hz-8kHz) on mono channels & 4-band active EQ on stereo line channels 7 & 8
- 2 built-in DI boxes for direct instrument connections on channels 7 & 8
- 4 Aux sends—2 FX & 2 Mon
- Dual 9-Band graphic EQ on the Mains and Monitor outputs for tuning rooms and monitor mixes
- Mono output with level control & low pass filter selectable from 75Hz-100Hz
- 3-Mode Amplifier for ultra-flexible routing, switchable as Mains Stereo L/R, Mono Mains/Monitor 1, or Mon 1 & Mon 2
- Precision Passive EQ for enhanced clarity and LF response with Mackie passive loudspeakers
- 48v Phantom power available for all mic inputs
- Headphone output with level control
- 12v BNC lamp Jack
- Built-like-a-tank metal chassis with a handle built into the front of the mixer for easy transport
- Rack ears included
- Lightweight and portable (29lbs/ 13kg)
Power to the Desktop!
Ultra-light and rack-mountable, the Mackie PPM1012 professional powered desktop mixer features two ridiculously robust power amps for mains and/or monitors (800W + 800W). With 1600 watts of system power, this mixer provides all the raw power that you need. Things can get pretty intense out there, and your gear needs to be able keep up the pace. We custom designed the PPM1012 with Class-D amps, which are cool-running and boast maximum efficiency, keeping your sound pumping until they start kicking people out. We had to include Mackie’s proven Fast Recovery circuitry, eliminating the risk of pesky amp latching. The result is a distortion free mix even when pushing peak levels. The built-in limiter can go toe-to-toe with the most popular outboard stereo limiters used in live sound today, protecting your speakers from damage. The limiter’s attack and release times are specifically selected to address full-bandwidth music and will not muddy things up by adding any unwanted pumping. PPM mixers are surprisingly lightweight, but tremendously powerful. You can push the PPM1012 to its maximum output, distortion free!
The Right Tools for the Job
Most powered mixers out there have either a limited set of mixing tools—keeping your mix decidedly average—or they cram in a mind-boggling amount of lame effects that you would never use. Every professional carries the right tools for the job, so the PPM1012 comes with a great-sounding, highly useable toolkit:
Premium Mackie preamplifiers ensure transparent, low-noise/high-headroom characteristics right at the front of the mixer. The PPM1012 offers 8 mic/line channels with trusted Mackie preamplifiers.
True 48V phantom power allows every condenser mic to perform at its full potential.
Legendary 3-band active EQ with mid-sweep straight off the tremendously popular VLZ3 mixer series. Sweetening any channel is a breeze.
Individual mono channel inserts allow you to use your favorite compressor or other outboard processing on a critical instrument or voice. Don’t leave the lead singer hanging! They are also great direct outs for recording.
Dedicated in-line compressors (ch. 1-6) bring simple but sweet dynamics with the single twist of a knob.
Dual graphic EQs are provided for use with mains and monitors. These EQs feature tight, constant-Q Filters that effect only the frequency range you’ve intended, unlike many inexpensive built-in graphic EQs that will remain nameless.
Simple stuff like useable main and monitor output metering make a huge difference in your mix. Sorry, but 5 LED meters at the output doesn’t tell you that you’re about to clip. Our high-resolution 12-segment meters enable more visibility of your signal, and the super quick response of the meters allows what you see to translate quickly and easily to what you hear.
“Gig Ready” Effects
Dual (as in 2) all-new RMFX+ (Running Man FX) effects processors bring “gig-ready,” useable effects to your mixes. Why scroll through hundreds of bizarre effects, like “ghost ambience?” Yeah, like anyone even knows what that means. Or how about winners like “delay+phaser2,” which you’ll never use in a million years. Those other mixers will leave your fingers raw from all the scrolling you have to do. The RMFX+ processor features 24 solid FX that are known for their utility and usability. Small, medium and large room reverbs with the choice of a warm or bright characteristic put your mix in the right space. Simple, rich choruses and an array of practical delays with common amounts of repeats enable you to create professional mixes without requiring a two-hour sound check. Also, the RMFX+ is the first onboard processor to feature a user tap function. So if you want to use a delay, but our preset delay time doesn’t work, you can tap it in instantly! Basically, we’ve delivered a full rack of gear at your fingertips that is easy to master, allowing you to look and sound really good at your next gig. Really, really good.
Absolutely Armored
Armored and ready for action, the PPM1012 is encased in solid metal, protecting it from years of abuse and one too many spilled beers (seriously, spilled beer makes us sad). The integrated front handle allows you to easily pick it up and get going, and it is rack-mountable for added rigidity and security.
Matching Made Easy
Look, we want to make things as easy for you as possible. Matching speakers to amps can suck the fun out of an otherwise pleasant trip to the music store. Keeping that in mind, PPM mixers and Mackie passive speakers were made for each other. From our popular C series (C300/200) to our S series (S200/S400), we designed our mixer to match the power requirements of our passive speakers perfectly. Try driving a pair of S225 15” speakers off someone else’s mixer. You can almost smell the smoke now! Yet this is child’s play using a PPM and a pair of our S225’s. We easily provide enough power for a complete system. In fact, we’ve got the bollocks to drive two of our S215 15” 2-way speakers off the mains AND a pair of C300s as monitors without needing outboard amps. Others may try but, ultimately, don’t provide the necessary power.
So if you want a truly professional set of tools for your next gig, including a Mackie mixer, onboard compressors, Fast Recovery amplification, twin graphic EQs, and “gig-ready” effects, pair up a PPM1012 and any Mackie Precision Passive loudspeakers for the ultimate, portable, professional P.A. system.
How to Set Up Your RXS20:
All About Your RXS20:
Unboxing Video of RXS20:
The RXS20 is the best mixer stand on the market! This mixer is universal and works with any mixer up to 300lbs! The stand is made out of steel making it sturdy and tough! This stand has a sleek black powder paint coating making it look very professional!
The RXS20 is collapsible for maximum portability and easy storage.
What is very unique about this stand is how adjustable it is.
You can adjust the width from 13.8” - 23.6” making this perfect for any mixer, DJ controller, or other device.
The height is adjustable from 24” - 36”
All the adjustments are quick and easy with our state-of-the-art adjustment mechanisms.
It comes equipped with soft padding to mount your audio gear on to prevent against any scratches on your device.
It also has rubber feet on the end of each leg as well to make the stand sturdy.
Features:
- Rockville RXS20 Heavy duty mixer stand
- Universal with any mixer up to 300 LBS!
- Collapsable for maximum portability and easy storage
- Adjustable width (13.8” – 23.6” Inches) making this universal for any mixer and other gear
- Adjustable Height from 24” – 36” (Inches)
- Steel stand with sturdy arms
- Large enough for mixers, DJ gear, keyboards, and more
- Load capacity: 300 LBS
- 1 MM thick steel all around! This piece is rock solid! At Rockville we only make top quality gear!
- Best quality black powder paint coating
- Soft padding on mounting platform to protect your audio devices
- Rubber feet on the end of each leg
- 14.5 LBS (portable and light-weight)
Specifications:
- Weight Capacity: 300 lbs.
- Height Adjustment.: 24”-36”
- Width Adjustment: 13.8”-23.6”
- Base leg length: 19.5”
- Top arm length: 19.5”
- Construction: All-steel
- Color: Black Powder Coat Finish
- Item weight: 14.5 lbs
- Shipping Weight: 16.5 lbs
- Dimension of shipping carton: 24" x 20" x 3.1" (inches)
- Unit Dimensions when folded : 20” x 3.1” x 24”
About Rockville Quality Control Procedures:
The Rockville brand stands for Quality, Innovation and Value. We aim to deliver products twice as good as our competitors at a fraction of the cost of famous brands. All Rockville products go through the most rigorous quality control standards in the industry. Products go through months of extensive testing before they reach your hands. All functions and components are tested for quality. Rockville makes products that are virtually un-breakable! Rockville is one of the only brands in its class to have engineers and technicians test every concept model for weeks or months before starting production. Once production begins, Rockville sends product engineers to the factory to quality control every product. After production is complete Rockville has the head of QC in our overseas office test a certain percentage of all products from the production line a second time to ensure that the quality meets our strict standards. All Rockville products are backed with a hassle free warranty.
Video of RCXFM20E-B:
Description:
All Rockville pro audio cables are made with 100% copper which boosts the efficiency of the cable. There is nothing better than 100% copper. Most of the cheaper cables on the market do not use 100% copper, instead they make their cables with CCA (Copper Clad Aluminum). CCA cables do not perform on the level that 100% copper cables perform at. CCA will not conduct signals efficiently. A 12 gauge CCA cable will not even perform as well as a 14 gauge 100% pure copper cable, which will in turn, affect the performance and longevity of your equipment. If you find cables on the market that do not mention the copper content, there is a good chance that they are selling you a cheaper cable that is CCA and not 100% copper. Rockville pays an inspection company to oversee the manufacturing of the product to ensure that we provide a 100% Oxygen Free Copper Cable (OFC). Our OFC cables are less prone to oxidation, and will provide maximum signal transfer.
The other important factor of a cable is the shielding. Most of the good brands on the market have about 85% shielding coverage, so we decided to take our shielding a step further. Rockville cables are shielded with a tight copper mesh, covering 90% of the cable! The high percentage of coverage increases the ability to absorb the Electromagnetic Interference (EMI) and Radio Frequency Interference (RFI) that suppresses signal and degrades the performance of equipment. Rockville Cable’s copper shielding provides great flexibility, maintains a durable structural integrity, while decreasing signal interference ensuring enhanced signal clarity with every use.
Features:
- Rockville RCXFM20E-B Black 20 Foot Nickel Plated Female to Male XLR Microphone Cable
- XLR Connectors with Internal Strain Relief for Rugged Reliability
- 100% Copper Conductors for Enhanced Signal Clarity
- 90% OFC Spiral Shield for Effective EMI and RFI Rejection and Flexibility
- Length: 20 Ft
- Color: Black
Description of ATH-M50X:
As
the most critically acclaimed model in the M-Series line, the
ATH-M50 is praised by top audio engineers and pro audio reviewers
year after year. Now, the ATH-M50x professional monitor headphones
feature the same coveted sonic signature, with the added feature of
detachable cables. From the large aperture drivers, sound isolating
earcups and robust construction, the M50x provides an unmatched
experience for the most critical audio professionals.
More About the M-Series Headphones
Critically acclaimed M-Series professional monitor headphones
deliver accurate audio and outstanding comfort, perfect for long
sessions in the studio and on the go. Contoured earcups seal tight
for excellent sound isolation, with minimal bleed. And the pro-grade
materials are durable, yet comfortable. Find out why
online reviewers, top audio engineers, and cult followers agree,
M-Series is an unmatched combination of audio and build-quality that
gets the job done. Hour after hour, year after year.
Features:
- Audio Technica ATH-M50X Over Ear Professional Studio Monitor Collapsible Headphones
- Advanced build quality and engineering
- Critically
acclaimed sonic performance praised by top audio engineers and
pro audio reviewers
- Proprietary
45 mm large-aperture drivers with rare earth magnets and
copper-clad aluminum wire voice coils
- Exceptional
clarity throughout an extended frequency range, with deep,
accurate bass response
- Circumaural
design contours around the ears for excellent sound isolation in
loud environments
- 90°
swiveling earcups for easy, one-ear monitoring
- Professional-grade
earpad and headband material delivers more durability and
comfort
- Collapsible
for space-saving portability
- Detachable
cables (includes 1.2 m - 3.0 m coiled cable, 3.0 m straight
cable and 1.2 m straight cable)
- Top
choice for studio tracking and mixing, as well as DJ monitoring
and personal listening
- Type: Closed-back
dynamic
- Driver Diameter: 45
mm
- Magnet: Neodymium
- Voice Coil:
Copper-clad aluminum wire
- Frequency Response:
15 - 28,000 Hz
- Maximum Input
Power: 1,600 mW at 1 kHz
- Sensitivity: 99 dB
- Impedance: 38 ohms
- Weight: 285 g (7.8
oz), without cable and connector
- Cable:
Interchangeable cables: detachable 1.2 m - 3.0 m (3.9' - 9.8')
coiled cable, detachable 3.0 m (9.8') straight cable and detachable
1.2 m (3.9') straight cable
- Accessories
Included: Protective carrying pouch, 6.3 mm (1/4“) screw-on
adapter
- UPC:
- 613815994572
