- (1) 2007-2016 JEEP WRANGLER JK 4-DOOR Powered 10" MTX Subwoofer+Sub Enclosure Box
- (2) Pairs of MTX THUNDER65 6.5" 240 Watt 2-Way Car Audio Coaxial Speakers
- (1) Rockville RXA-F1 1600 Watt Peak/400w Dyno-Certified RMS 4 Channel Amplifier Car Stereo Amp
- (1) Rockville RWK41 + RTR172 4 Gauge 4 Chan Car Amp Wiring Installation Wire Kit (2) RCA's
- (2) Metra 72-6514 Speaker Harness Connector for Chrysler/Dodge/Jeep Cherokee
Authorized MTX Audio Dealer!
Description of J-WRANGLER-07A:
Amplified Thunderform with a single, hard hitting, ten inch Terminator Subwoofer and integrated 250-watt amplifier. Fits Jeep - 4-Door Wrangler JK 2007-2018. Installs on driver side rear wheel well. Vehicle specific ThunderForm enclosures are designed to utilize space in vehicles that would otherwise go unused to add a subwoofer enclosure. These enclosures are highly durable and provide a custom fit so that you do not have to sacrifice cargo space for added aftermarket performance. This model includes a single 10" subwoofer and integrated 250-watt amplifier for an unbeatable listening experience with a stealthy factory look.
Stock Fit And Look
This Thunderform model is constructed using durable MDF and aviation grade
carpet to ensure durability over time. The included 10" subwoofer and integrated
250-watt amplifier that are perfectly matched to ensure peak performance in both
factory or aftermarket audio systems.
Note: Models with convertible soft tops will have a fitment issue with the subwoofer location. The top on that side will not sit flat as it will lay on top of the subwoofer enclosure. This issue can be resolved by either removing the soft top or purchasing a 3" spacer and 3.5" 1/4-20 bolt with security head from your local hardware store, which will move the enclosure away from the side of the Jeep allowing the convertible soft top to lay flat.
Features:
- 2007-2016 JEEP WRANGLER JK 4-DOOR Powered 10" MTX Subwoofer and Enclosure
- RMS Power Handling: 250 Watts
- Peak Power Handling: 500 Watts
- Frequency Response: 34 Hz - 140 Hz
- Easy install with perfect factory fit
- Utilize unused space in vehicle
- Molded the same color throughout so scratches won't show
- Easily Integrates with factory audio system
- Available for over 225 vehicles
- Includes installation hardware for an easy, flawless install
- Product Dimensions: 17.8" x 16.31" x 6.56" inches
- Product Weight: 24 Lbs.
Description of THUNDER65:
Rich Bass
The THUNDER65 is a 6.5" 2-way coaxial speaker pair that can handle up to
60-watts RMS power. THUNDER speakers are set apart from the "other guys"
because of its ability to reproduce low frequencies that other speakers
cannot reproduce.
No Subwoofer Required!
The Thunder Coaxials offer unbeatable performance for the price in their class.
They provide outstanding low frequency reproduction, easy installation, and are
great as factory replacements with or without an additional amplifier. While no
car speaker can produce bass like a subwoofer, these speakers truly shine in the
lower frequencies. The THUNDER Series Coaxial offers it all. You will have
incredibly clear response with the built-in tweeter, and plenty of Low THUNDER
response from this speaker's Polypropylene cone. The rubber surround will shrug
off the weather and wear that come with living in your car full-time.
Audio Imaging
The THUNDER65 uses a polypropylene woofer that is incredibly durable and a 15
degree pivoting tweeter to assist in obtaining the best imaging based on install
location. The speakers concave cone design also assists in delivering
exceptional imaging especially when speakers are mounted in the doors of a
vehicle. This model includes a high temperature 4-Ohm voice coil and
incorporates Spider Plateau Venting to ensure cool air is targeting the voice
coil ensuring reliability over time.
Features:
- Pair MTX THUNDER65 6.5" 240 Watt 2-Way Coaxial Car Speakers
- RMS Power Handling: 60 Watts (Per Speaker)
- Peak Power Handling: 120 Watts (Per Speaker)
- Frequency Response: 48Hz - 20kHz
- Cone Material: Polypropylene
- Woofer Mounting Depth: 2..063" inches
- Extended Low Frequency Reproduction: Allows the speaker to deliver a Bigger, Fuller Sound
- Concave Cone Design: Produces Improved Off-Axis Response
- Pivoting Tweeter: To allow for Improved Imaging in Any Installation Location the Tweeter can Pivot 15° in Any Direction
Description of RXA-F1:
Over the years, the technology used to create audio amplifiers has grown by leaps and bounds. We consider it our mission to use our expertise in developing the latest technologies and to bring you the absolute best sounding amplifiers on the market at a reasonable price. From its clean, sleek design to its high quality components, you will be amazed at the quality and power that these new Phenom amps offer.
The RXA-F1 is a 4 channel high power amplifier with 1600w peak. 380 Watts (4 x 95 Watts @ 2 ohms). You can also bridge the amplifier and get 2 x 200 Watts bridged @ 4 Ohms. Here at Rockville we offer the best value in car audio. We therefore want to make it easy for you to compare our products to any brands on the market. The peak rating can be used to compare with brands who use peak ratings such as Boss and Power Acoustik while the Dyno Certified RMS rating can be used to compare with top brands such as Kicker, Rockford, Alpine, etc.
This unit also features a high speed MOSFET power supply, studio-grade bipolar output stage transistors and ELNA brand audiophile capacitors. It has a fully adjustable 12dB/Octave cross over with differential circuitry. High Level inputs, also referred to as Speaker Level inputs, allow you to install the amplifier into your vehicle even if you do not have any preamp outputs available. That means you can install this amplifier to your factory or aftermarket receiver. Other features include Auto-Start Smart turn-on (This function senses when there is a signal from the head unit and automatically turns on the amplifier hence no need to run a Remote Turn-On wire), a fully adjustable 12dB bass equalizer, 2 ch/ 4 ch input mode switch, mute and delay soft start technology, and a crossover band-pass control. The RXA-F1 is protected by a full IC controlled circuit and has professional peak limiter circuitry guaranteeing distortion free musical playback at all levels.
One last point I want to make about this amplifier is efficiency. The circuitry of this amplifier is a class A/B circuitry. Class A/B is known to have amazing sound quality. Pro audio amps usually all are class A/B. Class A/B however is not known for its efficiency. To make this amplifier more efficient we simulated a class “G” amplifier. Class G is technology that switches the rail voltage depending on how much power is being used. We have similar technology built into these class A/B amplifiers which make these about 65-70% efficiency which is just amazing for a class A/B amplifier.
We are so confident that you will be extremely satisfied with this amplifier that we are giving every customer a 90 day money back guarantee. So purchase the amplifier and try it for 90 days. If you are not happy, we will call tag it and cover return shipping costs and refund you all your money back. (Amp must be complete with accessories and original box please).
Features:
- Rockville RXA-F1 1600 Watt Peak/400w Dyno-Certified RMS 4 Channel Amplifier Car Stereo Amp
- Dyno Certified RMS Power Ratings: (Certified Dyno Test / Less than 1 % THD) (Use these ratings when comparing with top brands such as Kicker, Rockford Fosgate, etc)
- 260 Watts (4 x 65 Watts) at 4 ohms and 1% THD+N
- 380 Watts (4 x 95 Watts) at 2 ohms < 1% THD
- 2 x 200 Watts bridged @ 4 Ohms < 1% THD
- Peak: (Use these ratings when comparing with the top budget brands such as Boss, Power Acoustik, etc):
- 1600 Watts (2 x 800 @ 2 ohms or 1 x 1600 @ 4 Ohms)
- High-Speed MOSFET Power Supply
- Studio-Grade Bipolar Output Stage Transistors
- Fully Adjustable 12dB Bass Equalizer
- 2-Ohm Stable Stereo
- 4-Ohm Mono Bridgeable
- 3 Channel Mixed-Mono Capable
- Mute and Delay Soft Start System
- Full IC-Controlled Protection Circuitry
- 2 CH / 4 CH Input Mode Switch
- RCA Preamp Line Output
- ELNA Brand Audiophile Capacitors
- 8 Volt Preamp Circuitry
- Status Mode LED Indicator
- Minimum THD: < 0.05%
- Frequency Response: 10Hz - 40KHz
- Fully Adjustable 12dB / Octave Crossover with Differential Circuitry
- CH3 & CH4 Low Pass 50Hz - 3KHz
- CH3 & CH4 High Pass 15Hz - 1KHz
- CH1 & CH2 High Pass 50Hz - 300Hz, 500Hz - 3Khz (x10)
- Sensitivity: 100dB @ 1w / 1m
- Damping Factor: > 200 @ 100Hz
- 60 Amp Maxi Fuse
- Dimensions: (W x H x L) 8.5" x 1.8" x 13"
About Rockville Quality Control Procedures:
The Rockville brand stands for Quality, Innovation and Value. All Rockville products go through the most rigorous quality control standards in the industry. Products go through months of extensive testing before they reach your hands. All user functions are tested and all internal components are tested for quality. Rockville makes products that are virtually un-breakable! Rockville is one of the only brands in its class to test every concept model for weeks or months before starting production. Once production begins, Rockville sends product engineers to their factory to quality control every line of production. During production every product is tested and on top of that Rockville goes the extra mile and has their high level product engineers do an additional quality control. They test a certain percentage of all products from the production line a second time to ensure that the quality meets their vigorous standards, and to make sure that there is never a batch of products with even a slight problem. All Rockville DJ/PA speakers are backed with a full 1 Year warranty, though it is unlikely that you will need to use it.
Features of 72-6514:
- Metra 72-6514 Speaker Harness Connector for Chrysler/Dodge/Jeep Cherokee
- Quick and easy installation
- No cutting needed
- Plugs directly into harness
- Speaker Harness for Select Chrysler/Dodge Vehicles
- No cutting into original wires needed
- Plugs into original equipment radio
Video of RWK41 + RTR172:
Video for Unboxing RWK41 + RTR172:
Description:
The Rockville RWK41 + RTR172 4 AWG (American Wire Gauge) amp kit has the following diferences over other amp kits on the market at this price point.
1. Our RCA cables are 100 % copper. These are top of the line RCA cables
2. Better Resistance: The only thing that really matters with wires is the resistance rating. This is a measurement of conductivity and how much signal is loss per foot of wire. Since Rockville wires are made with around 3 times as much copper as any other wire at this price point, these wires had a much better resistance rating which means they will transfer more power to your amps than the other brands.
3. We do not cheat you on the thickness of the wire. These are standard American wire gauge thickness. This is another reason our conductivity is better than anything else at this price point. Other brands in the market place write 4 gauge, but cheat you on the thickness. We are honest about the thickness.
4. The Rockville amplifier installation kits feature a new soft abrasion proof insulating jacket. This rugged PVC outer jacket allows for 100% improved flexibility over standard power cables making them extremely easy to route through your vehicles interior, and it maintains exceptional resistance to grease and oil. The PVC outer jacket can with-stand an extreme temperature range of -40 to 220 degrees F.
The RCA signal transfer cables included in this kit feature blue and silver twisted pair technology in a clear outer jacket insulation skin. Not only do the blue and silver wires look cool but they also provide superior signal transfer with maximum noise suppression. They are 100% copper to provide absolute lossless perfect signal transfer to your receiver. This technology reduces interference, so your audio signal flows clean and pure at all power levels.
This kit also includes a massive 80 Amp AGU Gold Plated Fuse, so you can be sure it will handle the all the DC power that your amp will need without even the slightest loss of current. The included 7 split loom tube provides protection for your power cable from the typically harsh environment found under the hood of your car.
Audiosavings product experts have tested this amp kit against many leading amp kits on the market and were were impressed not only by the great looks but by the quality of these Rockville installation kits as well. These kits had a lower resistance rating than the other brands we compared and tested them against. What this means is that Rockville manufactures their kits with more copper than other kits at this price point, ultimately providing your amplifiers with better and cleaner DC power, so they work cooler and more efficiently. You will hear the difference a Rockville installation kit will make!
One other last thing worth noting about our kit compared to others. Our kit cosmetically looks the best. It has blue power wire, clear ground wire, and twisted pair RCAs with matching colors. This model includes (2) sets of RCA cables.
Features:
- Rockville RWK41 + RTR172 4 Gauge 4 Channel Car Amplifier Wiring Installation Kit
- (2) 17 High Grade Twisted Pair of 100% Copper RCA Cable
- 17 4 Gauge Translucent Blue SuperFlex Power Cables
- 17 18 Gauge Blue Remote Cable
- 17 16 Gauge Clear Speaker Wire
- 3 4 Gauge Clear SuperFlex Ground Wire
- Gold Plated AGU Heat Resistant Fuse Holder
- 80 Amp AGU Gold Plated Fuse
- 7 Split Tube Loom
- Accessories Included: Wire Ties, Ring Terminals, Butt Connectors, Spades, and Grommets
- Soft abrasion proof insulating jacket allows for 100% improved flexibility
- PVC outer jacket can with-stand an extreme temperature range of -40 to 220 degrees F
The Rockville Difference:
Whenever you see the Rockville shield on a product you know that it has the stamp of approval. While other companies simply import products from China, Rockville manufactures the products in China to lower your cost but do so under American style supervision and quality standards to get you that USA quality that you want!
About Rockville Quality Control Procedures:
The Rockville brand stands for Quality, Innovation and Value. All Rockville products go through the most rigorous quality control standards in the industry. Products go through months of extensive testing before they reach your hands. All user functions are tested and all internal components are tested for quality. Rockville makes products that are virtually un-breakable! Rockville is one of the only brands in its class to test every concept model for weeks or months before starting production. Once production begins, Rockville sends product engineers to their factory to quality control every line of production. During production every product is tested and on top of that Rockville goes the extra mile and has their high level product engineers do an additional quality control. They test a certain percentage of all products from the production line a second time to ensure that the quality meets their vigorous standards, and to make sure that there is never a batch of products with even a slight problem. All Rockville products are backed with a hassle free warranty, though it is unlikely that you will need to use it.
Great features and great quality make Rockville a great choice.
- UPC:
- 613815852544
