Package Includes:
- (1) AKG C3000 Large Diaphragm Studio Recording Condenser Microphone Mic w/Shockmount
- (1) Rockville RG30 ROGAN STAND 30" Pro Boom Arm Mic Stand w/ Fixed Mount+Desk Stand
What's in the Box:
- (1) C3000 Microphone
- (1) H85 Universal Shock Mount
Description:
The C3000 high-performance, large-diaphragm condenser microphone has been a standard for live applications and studio recording for almost two decades. It is an excellent choice for vocals, electric and acoustic guitars, drum overhead and brass instrument miking. The switchable attenuation pad and low-cut filter enable high SPL up to 150dB and eliminate proximity effect.The redesigned C3000 presents itself as a cost-effective, rugged workhorse with a sleek and classy finish.
Features:
- Polar Pattern : Cardioid
- Audio frequency bandwidth : 20 - 20000 Hz
- Maximum SPL : 150 dB
- Equivalent noise level : 14 dB-A
- Sensitivity : 20 mV/Pa
- Signal to Noise : > 80 dB-A
- Preattenuation Pad : -10 dB
- Bass cut filter : 500 Hz, 6dB/octave
- Electrical impedance : < 200 Ohms
- Recommended load impedance : > 1000 Ohms
- Type : Balanced XLR
- Gender : Male
- Contacts : 3-pin
- Voltage : 9 to 52 V, 2mA
- Current : 2 mA
- Guitar Amps / Bass Amps : Yes
- Drums / Percussion : Yes
- Horns / Woodwinds : Yes
- Piano / Strings : Yes
- Vocals : Yes
- Height : 162 mm
- Width : 53 mm
- Diameter : 19 mm
- Net Weight : 320 g
How To Set Up Your RG30:
How To Set Up Your a Dynamic and Condenser Microphone to your RG30:
How To Set Up a Smartphone or Tablet to your RG30:
What's in the Box:
- Boom arm stand
- Allen key
- 2" long M8 screw (for desk surface-mounting)
- 4" long M8 screw (for desk surface-mounting thicker desks)
- C-Clamp for desk clamping
- Fixed mounting plate to mount it into your desk (comes pre-instal to the C-clamp, see our video for how to install)
- Built-in 6.5 foot XLR cable that is hidden and run inside the boom arm stand
- Mic clip
Description:
Why is this better than others ?
- Our model includes a high-quality C-clamp so you can mount the stand to the side or the back of a table or desk. But what really sets our item aside is that we also give you the ability to mount this to the top of the desk for a cleaner installation. This enables you to mount the boom arm in the most optimal location on your desk.
- We eliminate clutter by including a cable that is fixed inside of the boom arm and completely hidden. If you need to replace the cable you can easily replace it.
- Our boom arm has a great telescoping mechanism that makes it easy to adjust yet it will firmly stay in place.
- The look of this is very professional and clean. There are no springs or other eye-sores.
- Our boom arm completely folds in half if you need to travel with it.
- We build our model out of Aluminum which costs more than steel. What makes this great is it will never rust and it is more light-weight and higher quality.
- We include all the screws and cables, mic clip, and installation video for installing it on the top of your desk.
Features:
- Rockville RG30 ROGAN STAND 30” Inch Pro Boom Arm Mic Stand
- Includes XLR cable built into the stand that is hidden inside the stand for a clean look
- Deluxe pro version is one solid piece with no visible springs and an advanced articulation mechanism
- Easily Mounts to the top of a desk (See our install video)
- Easily clamps to the side of a desk with the included C-Clamp (supports desks up to 2.3" inches thick)
- This is made out of aluminum which is rust-free and lighter weight
- Arm length: 14" + 14"
- Position is completely adjustable
- Firmly stays in place once you adjust it
- There is a safety locking pin for the arm to lock in place (other similar stands do not have this)
- Foldable design, just pull the knob in the middle of the stand and it folds in half (Other similar stands do not have this)
- Standard 5/8" Mic Threads for Connecting Most Podcast and Vocal Microphones
- Suitable for studios, broadcasting, podcasting, and more
1 YEAR
- UPC:
- 613817087012
