Package Includes:

• (1) 512 Audio by Warm Audio 512-BBA 31" Adjustable Microphone Boom Arm Mic Stand
  
• (1) Rockville RCM03 Pro Studio Recording Condenser Microphone Mic+Metal Shock Mount
  

---

Description of  Broadcast Boom Arm:

The 512-BBA is an adjustable microphone boom arm featuring a silent, internal, high-tension spring design, extra-wide mounting clamp, and articulating integrated swivel. With 360 degrees of rotation and simple two-axis adjustment, you’ll easily find and maintain the perfect mic position every time without making a sound.

Bring Your Sound Closer
Bring your mic closer to your voice and away from distracting vibrations caused by typing, desk movement, and noisy fans. With professional looks and a reliable, high-tension spring hinge, 512-BBA easily stays in place without any additional tightening or adjustments.

Don’t let anything come between you and clean, clear audio.

Perfect Mic Placement (Every Time)
The 512-BBA features a durable yet lightweight steel construction that easily holds most professional recording and broadcast microphones, up to 3 lbs. Whether your perfect placement is over your monitor or stretched across the table, 512-BBA’s 360 degrees of arm rotation and smooth, dual-axis swivel lets you enjoy a full range of motion to effortlessly find the optimal mic placement.

512-BBA is outfitted with a silent-spring design so you can make all the adjustments you want without making a sound.

Features:

• Extra-wide mount. Featuring a sturdy metal C-clamp that attaches to any surface up to 2 inches thick and includes an anti-scratch pad to protect your desk
  
• Simple cable management. Keep your setup clean and clutter-free with the included velcro wraps for quick and simple cable management.
  
• Universal compatibility. Compatible with virtually any microphone, 512-BBA comes with both ⅜ and ⅝ thread adapters to make mounting a snap.
  
• Fully collapsible. Tucks away in an instant for compact and easy storage whenever you’re off the air.
  

Specifications:

• Upper Arm Length: 18.5in (470mm)
  
• Lower Arm Length: 18.5in (470mm)
  
• Weight: 3.9lbs (1.75kg)
  
• Horizontal Reach: 31.5in (800mm)
  
• Vertical Reach: 32in (820mm)
  
• Rotation: 360 degrees
  
• Load: Supports microphones weighing 1-3lbs including shock mount (450g - 1360g)
  
• Maximum Desktop Thickness: 2in (55mm)
  
• Included Accessories: 5 Velcro wraps

---

All About Your RCM03:

Unboxing Video of RCM03:

How To Setup A Rockville Condenser Microphone With Your Computer:

Description:

The Rockville RCM03 condenser microphone performs better than famous branded microphones that cost over $150. This model is similar to our RCM01 however it is made of aluminum, and the frame is slightly larger. We also upgraded this model to a high end metal anti-wind cap! We highly recommend this design. This model is an amazing upgrade to our top selling RCM01 model!

Multi-Purpose

Designed for crystal clear capturing of vocals, acoustic and amplified instruments, as well as room reverb. The frequency pick up pattern makes the RCM03 amazing in studio applications.

The aluminum construction makes the RCM03 tough enough for Live sound applications as well!

Multiple connection options!

This microphone can be used in multiple ways. You can connect this to the phantom power of your mixer or you can connect it directly to your computer sound card. We include both cables! We include a cable to connect it to your mixer as well as a cable to connect the mic to your computer!

Quality built inside and out!

The microphone is made of aluminum. It is very rugged and tough like you would expect from any Rockville product. This microphone has a large diaphragm which is what enables our mic to deliver a wider range of high and low frequencies than our competitors. Our frequency range is tested at 30HZ - 20KHZ! The mic sounds crystal clear sound with no distortion!

The PCB (circuit board) uses surface mounted components which is the same method the expensive brands use. We use only top components that under-go extreme testing by our own audio engineers.

The last thing that I need to mention and call out is that our product is very sturdy. Let me explain. When you are recording, you do not want even the slightest noises coming from your mic. The microphone consists of a casing and there is a cartridge inside the case. You do not want that cartridge moving around. We made sure to adjust our mechanism and ensure the cartridge is firmly in place and not creating any unwanted noises.

Best Value

After testing our Rockville condenser mics against mics that cost 300% more money, we found ours to be as good or better than the ones we tested against.

What's Included:

• RCM03 Condenser Microphone (made of aluminum!)
• 100% Copper 10 foot 3.5mm jack to XLR cable to connect mic to your computer or other device
• 100% Copper 10 foot XLR to XLR cable to connect to any mixer with phantom power
• Metal Shock Mount
• Metal Anti-wind Foam Cap
• Owners Manual
• Warranty Card

Features:

• Rockville RCM03 Pro Studio Recording Condenser Microphone Mic+Metal Shock Mount
• Aluminum high quality construction
• Polar Pattern: Internally Polarized Condenser Cardioid Design
• Large diaphragm for smooth, natural sound and low noise
• Power Requirements: 48V DC Phantom Power
• Uni-directional
• Sensitivity: -27dB±2dB (0dB=1V/Pa at1kHZ)
• Output Impedance: 200O±30% (at 1kHz)
• Standard Operating Voltage: 3V
• Operating Voltage Range: 1.5V-10V
• Current Consumption: Less than 500uA
• Voltage Deduction Characteristic: within 3dB at 2V
• S/N Ratio: More than 24dB
• Frequency Response: 30Hz - 20 KHz
• Fixed Crossover Filter Cutoff Frequency: 40Hz---16 KHz
• Load Impedance: Greater or = to 1000 Ohms
• Equivalent Noise Level: Less than 18dB A (IEC581-5)
• Max. Input SPL: 126dB (THD=1.0% at 1kHZ)
• Electrical Current: Greater than 4.8Ma
• Microphone Body Net Weight: 320 Grams (0.7 Pounds)
• Microphone Max.diameter: 44mm (1.73" inches)
• Microphone Length: 217mm (8.54" inches)
• Microphone Material: Steel grille + Alluminum (handheld part)
• PCB Layout: Surface mount

---

About Rockville Quality Control Procedures:

The Rockville brand stands for Quality, Innovation and Value. All Rockville products go through the most rigorous quality control standards in the industry. Products go through months of extensive testing before they reach your hands. All user functions are tested and all internal components are tested for quality. Rockville makes products that are virtually un-breakable! Rockville is one of the only brands in its class to test every concept model for weeks or months before starting production. Once production begins, Rockville sends product engineers to their factory to quality control every line of production. During production every product is tested and on top of that Rockville goes the extra mile and has their high level product engineers do an additional quality control. They test a certain percentage of all products from the production line a second time to ensure that the quality meets their vigorous standards, and to make sure that there is never a batch of products with even a slight problem. All Rockville products are backed with a hassle free warranty.