- (1) Blue Bottle Rocket Stage 1 Studio Condenser Microphone w/B8 Capsule+Shockmount
- (2) Rockville DPM5B 5.25" 2-Way 150W Black Active/Powered Studio Monitor Speaker
- (1) Rockville PRO-M50 Studio Headphones+Detachable Coil Cable+Case+Extra Ear Pad
Authorized Blue Dealer!
Description:
LET YOUR SOUND TAKE FLIGHT
Like its sibling the Bottle, Bottle Rocket Stage One breaks away from traditional microphones to propel your creativity to new sonic heights. The hand-tuned B8 capsule provides flexibility for a variety of recording scenarios, while our acclaimed interchangeable Bottle Caps (sold separately) enable you to create virtually any mic imaginable and capture any sound source.
Ready for Launch
Bottle Rocket Stage One includes the B8 large-diaphragm cardioid condenser Bottle Cap. Its mission: total recording versatility. The B8 capsule is a hotrod version of one of the world’s most legendary condenser capsules. But unlike it’s predecessor, which was lacking in mids, B8 is tuned for a lush midrange with a gorgeous lift around 5kHz and a smooth cut around 8kHz. It’s perfect for capturing a wide variety of sound sources with stunning detail—including lead vocals, electric and acoustic guitars, drums, percussion, horns and strings.
All the Right Stuff
Bottle Rocket Stage One is designed and hand-built in the USA for a lifetime of use. It features very low self-noise (<7.5dB), exceptionally high output (+12dBV), and a proprietary transformerless Class A FET circuit that delivers the most accurate, noise-free signal available. It even comes with a spider mount and flight case.
Interchangeable Capsules
Bottle Caps are a system of interchangeable capsules that provide a variety of tonal ranges, characters, diaphragm sizes and polar patterns for total recording versatility. Big vocal sounds. Vintage and modern sounds. Delicate, accurate reproduction. Different patterns. All in a single microphone. And the quick-change connection makes experimenting with new sounds fast and easy.
All in the Family
Blue’s Interchangeable Capsule family embodies our commitment to being unique, bold, and creative—just like you. Choose from the soul-satisfying warmth of the Bottle tube mic or the exacting clarity of the Bottle Rocket Stage One FET condenser. Work with a single iconic capsule or build out your mic collection with one of our curated 4-capsule lockers. And for even more sonic possibility—the full series Bottle Caps offers limitless tones. With one mic and so many interchangeable capsules, you can perfectly match your sound source with the correct mic every time you hit ‘record’.
Features:
- Blue Bottle Rocket Stage 1 Studio Condenser Microphone with B8 Capsule and Shock Mount
- Crystal-clear sound quality and superb detail with legendary B8 Bottle Cap
- Compatible with all interchangeable Bottle Caps
- Low self-noise (<7.5dB)and high output level (+12dBV)
- Class A Discrete solid-state electronics
- Includes shock mount and wood storage box
- TECHNICAL SPECIFICATIONS:
- Transducer Type: Pressure Gradient or Pure Pressure (depending on capsule)
- Polar Patterns: Cardioid, Omnidirectional, Figure of 8 (depending on capsule)
- Frequency Response: 20Hz – 20 kHz
- Sensitivity: 27 mV/Pa (+/- 10mV depending on capsule) at 1kHz (1Pa = 94dB SPL)
- Output Impedance: 50 Ohms
- Rate Load Impedance: Not less than 1 kOhms
- Noise Level A-Weighted: Not more than 7.5dBV – 14dBV (IEC 651) (depending on capsule)
- Maximum Output: +12dBV = 3.1 Vrms (2.5kOhms, 1% THD)
- Maximum SPL: 138dB SPL (2.5kOhms, 0.5% THD)
- Dynamic Range: 130 dB (@2.5kOhms)
- Power Requirement: +48V DC Phantom Power (IEC 268-15) (+35V min)
- Current Draw: 1.8mA (typical AI+48V)
Authorized Rockville Dealer!
How to Set Up your DPM Series Speakers:
Video of DPM5B:
The Rockville DPM5 Active/Powered Studio Monitor Speaker is a step-up version of our popular APM series. These speakers are sold individually and each speaker is bi-amped which means it has one amp for the highs, and another for the lows. These speakers have 150 watts of peak output power and 75 watts RMS. These sound better than the famous brand studio monitors. They have a flat frequency curve making these the perfect studio monitors. The only reason our price point is not 300 % higher is because you are buying directly from the manufacturer. We are one of the leading speaker manufacturers in the USA, and we have a state of the art manufacturing process. There is a lot to talk about so I will break it down into sections.
Description of the Enclosure:
We chose a wooden enclosure as opposed to a plastic enclosure. Your studio is made of wood for a reason. The sound characteristics of high quality wood are better than plastic. We only use the highest quality MDF wood. We do not bother with cheap particle board material when we want to make the best speakers. The thickness is 0.5” around and the front board is a full 1” thick to give you the best sound quality possible. The enclosure is built with the perfect amount of air space to maximize sound quality for a studio.
Every studio or computer room should look beautiful. We believe speakers should enhance the look of a room. We make these speakers in 3 beautiful finishes: painted black, painted white, and wood finish. We use “baking paint” made for wood surfaces. Baking paint is long lasting and is the best paint for speakers! We went with a beautiful finish that is mostly matte with a slight shine to it. Our designers spent countless hours on the color and design to make sure it is not only beautiful, but elegant as well to improve the appearance of your studio or room. We kept all the controls on the back of the speaker, which will keep the speaker looking very clean and modern. The tweeter has a curved front bezel to make the highs crystal clear and distortion free.
Amplifier and Speaker Components Details:
To get the most efficiency we use a class “D” amplifier. We use the best quality components from the most reputable circuit manufacturers in the world in order to produce crystal clear sound. Most brands do not like to reveal what’s in the guts of the speaker. We feel differently. We want you to know what is inside so you realize how good of a value we are offering and also so that you can understand how good these really are. We use ADAU 1701 Digital Sound Processor (DSP) for audio processing and TPA3116 for amplification. These are both known to be the best in class circuit designs. These components are amazing and allow us to adjust the sound via soft programming on a computer during the design stage to get the perfect sound. ADI and TI are the names of the makers of these ICs. Most people do not know the brand names that make circuits; but these are the most famous and reliable in the industry. Only very high end manufacturers like us use these components.
For highs, we use Ferro fluid enhanced 1" neodymium silk dome tweeters with metal grill protection. If you are an audiophile, I am sure you have tested and love the sound of silk dome tweeters. The neo magnet is strong and can handle a lot of heat. This enabled us to beef up the amplifier power without having to worry about melting or blowing the tweeter. The highs on these sound really good! I cannot wait for you all to hear it in person, because I cannot describe how good these sound! You really need to listen to them in person.
We use a 5.25” woofer that will out-perform a regular 5” woofer any day! The bass sounds amazing on these! Very clear and punchy! The woofer has an injection molded polypropylene cone. This is an engineered type of plastic that is used on many speakers today. It is strong and puts out a great sound. The rubber woofer surrounds increase sound quality and eliminate unwanted distortions. They sound better than foam surrounds in my opinion, which is why we went with rubber. The computer optimized electronic crossover network supplies amazing sounding highs, lows, and mids — basically it filters out unwanted frequencies from each component so that each speaker plays the right frequencies, which in turn allows the speaker to be louder without distorting. We use very high-grade crossover filters in our speakers. The specially wound voice coils produce accurate responses along the entire frequency spectrum. We developed the speakers with the most optimized magnet structure, cone, and cabinet space, with the goal of reproducing the sound to play back exactly the way it was recorded!
Added Benefits:
Our factory uses the latest Precision Glue Machine (Over 500 meter Tunnel Oven). But you may ask why am I talking about glue? Well, actually, the glue on the speakers is of the upmost importance. If the glue does not hold up, the speaker will be done and blow. We use the latest machinery to manufacture these speakers. The SPL of the speaker goes up when you use better glue and a better machine that can secure the glue in place. If the glue can handle more heat, than your speaker can handle more power!
Thick “Wadding” protects the inside of the speaker cabinet. This can be seen if the speaker cabinet is removed. Basically, wadding is a white chemical silk type of material that we put inside the speaker cabinet for multiple reasons. It helps to make the sound clearer, and at the same time it protects all the parts inside the speaker. This material is also fire retardant. This is unique to our speakers. Most other brands do not take this step due to the cost of the material, but it is a game changer if you are trying to create the best speaker!
Inputs and Outputs and Rear Panel Controls:
As I mentioned earlier, we kept all the controls on the rear of the unit to make the speaker look clean and modern. The Volume, High Pass filter and Low Pass filter controls are all found on the rear of the unit. The DPM5 has all your standard studio inputs and outputs such as a ¼” TRS and XLR balanced input jacks, and RCA input.
Features:
- Rockville DPM5B 5.25" 2-Way 150W Active/Powered Studio Monitor Speakers in black
- Peak Power: 150 Watt
- RMS Power: 75 Watt
- Bi-Amped: 25 Watts for highs, and 50 watts for the lows
- Enclosure is made of top quality MDF wood. Our enclosure is not particle board; it is true high-grade MDF! The enclosure is 0.5” thick around while the front board of it is a full 1” thick to give you the ultimate best sound quality!
- We use “baking paint” made for wood surface. It lasts long and is the best paint for speakers!
- Beautiful finish is matte with a slight shine to it. Our designers spent a lot of time on the color to make it beautiful and elegant looking to improve the appearance of your studio or room
- The enclosure is built with the perfect amount of air space to maximize sound quality for a studio
- The port is built to the perfect spec to enhance the sound
- Auto-Switching Power Supply
- Ferro Fluid Enhanced 1" Neodymium Silk Dome Tweeter With Metal Grill Protection
- Tweeter has 1” voice coil diameter
- Curved Front Bezel Design Eliminates Standing Wave Distortion
- Injection Molded Polypropylene Cone Woofer
- Rubber woofer surrounds increases sound quality and eliminates unwanted distortions
- Computer Optimized Electronic Crossover Network Supplies Amazing Sounding Highs, Lows, and Mids
- We developed the Most Optimized Magnet structure, Cone, and Cabinet Space that Reproduces the Sound to Play Back Exactly the Way it was Recorded!
- Specially Wound Voice Coils Produce Accurate Responses along Entire Frequency Spectrum
- Distortion-Free Playback Even at Max Volume Listening! Very Clean Sound!
- Our factory uses the latest Precision Glue Machine (Over 500 meter Tunnel Oven). To put it in simple to understand terms; the glue on the speakers is of the upmost importance. If the glue does not hold up, the speaker is done. We use the latest machinery to manufacture these speakers. The SPL of the speaker goes up when you use better glue and a better machine the secure the glue in place
Thick “Wadding” protects inside the speaker cabinet – Wadding is a white chemical silk type of material that we put inside the speaker cabinet for multiple reasons. It helps to make the sound come out more clear, and it also protects all the parts inside the speaker. This material is also fire retardant. This is unique to our speakers. Most other brands do not take this step due to the cost of the material, but it is a game changer!
- World class top of the line audiophile grade components! We use ADAU 1701 Digital Sound Processor for audio processing and TPA3116 for amplification. These are both known to be the best in class circuit designs. These components are also amazing and allow us to adjust the sound via soft programming on a computer during the design stage to get the perfect sound. ADI and TI are the names of the makers of these ICs. Most people do not know brands who make circuits, but these are famous in that industry and are known to be the best of the best. Only very high end products use these components
- 110 Volt compatible with SMPS technology – Normally most items have a transformer. Our SMPS technology switches voltage more efficiently and adheres to all international efficiency standards!
- Every Speaker in Production Undergoes a Computer Generated Sound Check Test to Ensure it Upholds to our Specifications and Standards
- We use a “6Sigma” style Quality Assurance of Each Product (Long story short, each product will work perfectly as advertised for a long long time!)
- Transducer Production Line to Make the SPL Performance Stable
Specifications:
- Certification: CE and RoHS Compliant
- Amplifier: Class D, very efficient amplifier with top components! (ADI--ADAU1701 DSP, TI--TPA3116, SMPS)
- System Impedance: Tweeter 6 O; Woofer 4 O
- Signal to noise ratio: 80dB (Maximum output with THD+1<1%, A-weight)
- Max SPL: 100dB @ 1w/1m
- THD: 0.10%
- Frequency Response: 55Hz - 20kHz
- 150 Watts peak output
- 75 Watt RMS output
- Input voltage: 120V
- Components: 1" neodymium silk dome tweeter and 5.25" woofer with rubber surrounds and polypropylene cone
- Product Dimensions in Inches (Single): (W*H*D) 7.4'' x 10.2'' x 9.8''
- Shipping Dimensions in Inches (For pair boxed): (W*H*D) 13.1'' x 13.5'' x 10.7''
- Net Weight: 11.03 LBS
- Shipping Weight: 13.24 LBS
- Includes power cord
- Input Impedance (Ohms): 10 K Ohm Balanced
- System Volume: (-30dB to +6dB)
- Inputs / Outputs / Controls:
- Volume control
- Independent High (–2dB – +1dB) and Low (–2dB – +2dB) frequency level controls
- One each ¼” TRS and XLR balanced input jacks
- RCA input
About Rockville Quality Control Procedures:
The Rockville brand stands for Quality, Innovation and Value. We aim to deliver products twice as good as our competitors at a fraction of the cost of famous brands. All Rockville products go through the most rigorous quality control standards in the industry. Products go through months of extensive testing before they reach your hands. All functions and components are tested for quality. Rockville makes products that are virtually un-breakable! Rockville is one of the only brands in its class to have engineers and technicians test every concept model for weeks or months before starting production. Once production begins, Rockville sends product engineers to the factory to quality control every product. After production is complete Rockville has the head of QC in our overseas office test a certain percentage of all products from the production line a second time to ensure that the quality meets our strict standards. All Rockville products are backed with a hassle free warranty.
Includes:
- PRO-M50 headphones
- Detachable cable
- Soft suede and leather ear cushions (interchangeable)
- Leather hard travel protective case
- Gold plated ¼" adapter
All About Your PRO-M50:
Description:
Rockville brings you studio quality headphones and at an incredible price with its new PRO-M50 headphones. These are professional grade headphones that are guaranteed to ourperform headphones that cost triple the price! These feature ergonomically designed swiveling cups with interchangeable soft suede or leather finish cushions (included). The ear cups seal tight for excellent sound isolation and minimal bleed. Inside these cups you'll find 40mm Neodymium drivers delivering accurate audio with an extended frequency range for clear and rich bass, and a full frequency range of mids and highs. These are closed back style headphones specifically designed for studio monitoring. These play back the sound with a flat frequency curve so you can hear your music exactly how it was recorded. With the PRO-M50 you can expect to hear every detail of every song with extreme accuracy. These headphones cover full frequency ranges; even extending a bit past the frequencies that the human ear can hear.
The headband is made of soft leather, offering ultimate comfort even after extended wear. The beautifully designed stainless steel headband frame and arms are strong and durable. A detachable 51" coiled 100% Oxygen Free Copper cable with a gold plated 3.5mm plug is included along with a gold plated ¼" adapter to ensure the best possible signal. A hard leather case is included to store and protect your new investment when you are on the go.
Amazing sound quality will make these your go-to headphones whether in the studio or out and about!
Features:
- Rockville PRO-M50 Studio Headphones w/ Detachable Coil Cable, Case+Extra Ear Pad
- Professional High-Definition Studio Headphones
- 40mm Neodymium drivers
- Ergonomically designed swivel ear cups
- Supreme sound isolation
- Accurate sound reproduction
- Minimal bleed
- Sturdy and durable steel headband and arms
- Soft leather headband cover
- Interchangeable leather and soft suede ear cups covers included
- Detachable 51" coil cable made of 100% Oxygen Free Copper (158" fully extended)
- Gold plated 3.5mm connector
- Gold plated ¼" adapter
- Hard leather carrying case
- Stainless steel headband frame and moving arms are durable and long-lasting
Specifications:
- Style: Closed-Back
- Design: Circumaural
- Transducer Type: Dynamic
- Driver: 40MM
- Sensitivity: 97±3dB
- Impedance: 32ohm
- Frequency Response:10Hz - 25KHz
- Max. Power: 600MW
- Rating Power: 260MW
- Net Weight: 290g (with cable)
- UPC:
- 613815776314
