- (1) Blue Bluebird SL Studio Condenser Recording Microphone Mic+Shockmount+Case
- (1) Samson RC10 Studio Microphone Mic Isolation Shield Vocal Booth Acoustic Foam
- (1) Rockville RVMIC4 Round-Base Microphone Stand With Quick Release Hand Clutch
Video of Bluebird SL:
Authorized Blue Dealer!
Description:
MODERN CRYSTAL-CLEAR SOUND
Bluebird SL delivers pristine, highly versatile sound that makes every detail of your performance come to life. With a high-pass filter and -20dB pad, Bluebird SL is ideal for capturing standout vocal performances, expressing the true tone of guitars, piano and more with extended upper clarity, smooth mids and rich lows. Next stop, top-flight sound.
Behind the Mic
With the original Bluebird microphone, Blue set a new standard for modern recording mics. Bluebird SL advances that legacy with refined sonics and versatile switches to capture exceptionally clear and powerful sound that makes ears perk up and listen. Add in an updated design to inspire your best performances, and what you get is a best-selling Essential Series condenser mic.
Inside the Sound
Every component of Bluebird SL is specially designed to deliver modern, crystal-clear tone. The hand-built capsule utilizes a fine, gold-sputtered Mylar diaphragm that delivers superior resonance at higher frequencies to help vocals cut through the mix. The sculpted rear backplate ensures balanced sound across the entire frequency spectrum. And discreet Class-A circuitry maximizes the accuracy of your sound.
Make The SwitchBlue Heritage
Bluebird SL is a one-of-a-kind mic for every kind of performance. The new onboard switchable 100Hz high-pass filter and -20dB pad give you the flexibility to track a wide variety of sound sources with nuance and power. Use Bluebird SL to capture a singer’s unique vocal character in stunning detail, achieve full-frequency guitar recordings and more.
All in the Family
Blue’s Essential Series brings distinct tonal characteristics to your studio, allowing you to pair each voice and instrument with its perfect microphone counterpart. Check out each mic to build a mic locker any studio would envy.
Features:
- Blue Bluebird SL Studio Condenser Recording Microphone, Shockmount and Case
- Technical Specifications:
- Transducer Type: Condenser, Pressure Gradient
- Polar Patterns: Cardioid
- Frequency Response: 20Hz – 20kHz
- Sensitivity: 28.5 mV/Pa at 1 kHz (1 pa = 94 dB SPL)
- Output Impedance: 50 ohm
- Rate Load Impedance: Not less than 1k Ohm
- Maximum SPL: 138dB SPL (0.5%)
- S/N Ratio: 82.3 dB-A
- Noise Level: 11.7
- Dynamic Range: 126.3 dB
- Power Requirement: +48V DC Phantom Power
- Weight: 1lbs
- Dimensions: 8.76 inch x 1.87 inch
- HPF: 100Hz, 12db per octave
- PAD: -20dB
Description of SARC10:
The Samson RC10 Reflection Filter works with your microphone to transform any home or studio recording space into a professional vocal booth. Featuring single-panel construction with an industry standard acoustic foam interior and aluminum framing, the RC10 rejects unwanted room noise and off-axis reflections, resulting in clear, crisp recordings.
Primarily used for vocals, the RC10 is extremely versatile and can benefit recording situations that involve guitars, drums and other instruments. The lightweight RC10 is extremely portable, allowing you to capture great recordings anywhere, as well as adjustable, with its steel mounting mechanism offering up to 6.5” of vertical reach.
The included mounting hardware easily attaches to standard mic clips (top threading) and stands (bottom threading), which also allows for up to 8.75” of forward/backward movement for optimal placement.
Features:
- Samson RC10 Studio Microphone Mic Isolation Shield Vocal Booth Acoustic Foam
- Lightweight, portable microphone reflection filter
- Single-panel construction
- Industry standard acoustic foam interior
- Aluminum framing
- 10" (H) x 14" (W) x 9" (D) reflection coverage
- Steel filter mount, including mic clip/stand attachment piece
- Filter mount offers up to 6.5" of vertical reach
- Mic clip/stand attachment piece offers 8.75" of forward/backward reach
- 5/8"-27 mic clip/stand threading
How to Set Up Your RVMIC4:
Videos of RVMIC4:
Description:
The Rockville RVMIC4 mic stand is extremely rugged and tough! This is one of the most sturdy stands on the market. It also offers the most convenient features on the market.
This mic stand has a clutch system that allows you to instantly raise or lower the stand with one hand. It is the most convenient way to adjust a mic stand ever!
This stand is built so you can throw it around! It is one of the thickest stands on the market! Most brands do not advertise how thick their tubing is, but we do! Our 1 inch diameter thick steel tubing is unmatched by any other brands! The joints we use are made of aluminum. Almost all competing products use plastic. We use a very heavy duty round base that’s got some serious weight to it! This makes the stand very sturdy. The diameter of the base is 9.84” inches. To give you an idea of how heavy-duty this stand is, it weighs in at 8.8 lbs. This stand is rock solid and un-breakable!
For added convenience we added wire clips that allow you to route the wire cleanly. If you own a concert hall or just want the best performing stand on the market, then this is the stand for you.
Features:
- Rockville RVMIC4 Professional Round-Base Microphone Stand With Quick Release Hand Clutch
- One-hand adjusting using the hand-clutch system (no need to turn knobs to adjust!)
- Adjustable Height Range: 43-69 inches
- Aluminum leg joints
- This mic stand is the easiest and quickest to adjust on the market!
- The stand tubes are 25 mm thick for the bottom tube, and 18mm for the top tube. This is about 50 % thicker than almost all other brands on the market making this one of the sturdiest stands in the world
- 100% steel construction and Aluminum joints! NO Plastic parts!
- Virtually Unbreakable (under normal use)
- Cable guiding clip on the stand for running cables
- Black Color
- Top Tube Diameter: 0.75" inch
- Lower Tube Diameter: 1" inches
- Round base with a diameter of 9.84” inches
- This rock solid stand weighs in at 8.8 LBS!
- UPC:
- 613816407989
