Package Includes:

• (1) Audio Technica AT4047/SV Cardoid Condenser Mic AT-4047 AT4047SV+Protective Case
  
• (1) Rockville ISOBOX Recording Microphone Sound Isolation Box+Mic Stand+Pop Filter
  

---

Authorized Audio Technica Dealer!

The rich, warm sound takes you back to the classic F.E.T. studio microphones. But there’s nothing remotely old-fashioned about the technology behind that vintage sound. The AT4047/SV studio condenser’s dual-diaphragm capsule design maintains precise polar pattern definition across the full frequency range. With a wide dynamic range, incredibly low self-noise and high SPL capability, this versatile microphone excels on vocals, strings, acoustic guitar, instrument ensembles, small vocal groups and voiceovers.

Features of AT4047/SV:

• Designed for critical studio, live sound and broadcast applications
• Transformer-coupled output and specially-tuned element provide sonic characteristics reminiscent of early F.E.T. studio microphone designs
• Exceptionally low self-noise, wide dynamic range and high SPL capability
• Dual-diaphragm capsule design maintains precise polar pattern definition across the full frequency range of the microphone
• Precision-machined, nickel-plated brass, acoustic element baffle provides enhanced element stability and optimal sensitivity
• Vintage silver-matte finish on microphone and shock mount
• Open acoustical environment of the symmetrical housing assembly minimizes unwanted internal reflections
• # State-of-the-art surface-mount electronics ensure compliance with A-T's stringent consistency and reliability standards
• ISwitchable 80 Hz hi-pass filter and 10 dB pad
• Custom shock mount provides superior isolation

Specifications:

• Element: Externally-polarized (DC bias) condenser
• Polar Pattern: Cardioid
• Frequency Response: 20-18,000 Hz
• Low Frequency Roll-Off: 80 Hz, 12 dB/octave
• Open Circuit Sensitivity: -35 dB (17.7 mV) dB re 1V at 1 Pa
• Impedance: 250 ohms
• Maximum Input Spund Level: 149 dB SPL, 1 kHz at 1% T.H.D.;159 dB SPL, with 10 dB pad (nominal)
• Noise: 9 dB SPL
• Dynamic Range (typical): 140 dB, 1 kHz at Max SPL
• Signal-to-Noise ratio: 85 dB, 1 kHz at 1 Pa
• Phantom Power Requirements: 48V DC, 3.0 mA typical
• Switches: Flat, roll-off, 10 dB pad (nominal)
• Weight: 14.5 oz (410 g)
• Dimensions: 6.69" (170.0 mm) long, 2.10" (53.4 mm) maximum body diameter
• Output Connector: Integral 3-pin XLRM-type
• Cable: 16.5' (5 m) dual shielded, 8-conductor cable, 5-pin XLRF-type connector at microphone, two 3-pin XLRM-type output connectors
• Accessories Furnished: AT8449/SV shock mount for 5/8"-27 threaded stands; microphone dust cover; protective carrying case
• Audio-Technica case style: R1

---

All About Your ISOBOX (Update):

How To Set Up Your ISOBOX (Update):

How To Remove the Door From Your ISOBOX:

Setting Up A Dynamic or Condenser Microphone with Your ISOBOX:

How To Set Up ISOBOX to Mic Stand:

Features:

• Rockville ISOBOX Recording Microphone Sound Isolation Box
  
• Includes an interior adjustable Mic Stand
  
• Includes built-in Pop Filter
  
• Includes travel bag with handle
  
• Fully enclosed to eliminate reverberation and reflections from your room
  
• Inside the box:  1.6'' inch thick high-density acoustic foam
  
• Removes echoes and reflections & reduces noise 
  
• Enhances sound clarity greatly and protects recordings from room coloration to produce dry sound
  
• A single layer pop filter is built in the front of the door to filter out harsh plosive sounds and unwanted bursts of air
  
• Great for vocal recording, podcasting, voice over work, instruments, percussion
  
• Perfect for home studios, recording studios, or recording outdoors
  
• Place the microphone inside the box with the door closed then you get a fully closed isolation box for your microphone
  
• Strong and stable box: The outer frame and grills are made of strong, lightweight aluminum
  
• Rubber feet
  
• 5/8” mic thread + 3/8” adapter
  
• Can be mounted to a mic stand using the included accessories or used on a desktop
  
• Compatible with all the microphones, such as vocal microphone, condenser microphone, USB mics, cell phones
  
• Work with various mic stands such as tripod mic stands or even desktop mic stands
  
• The internal mic stand can be installed in 4 placements on sliding rails or it can be removed entirely
  
• 4 holes located on that bottom that allow 4 different entry points for XLR mic cables
  
• Removable door with tight latches for secure opening and closing
  
• USA and EU patent pending
  
• Box exterior dimensions: 13” x 13” x 16.93” Inches (330x330x430mm)
  
• Box interior dimensions: 9.84” x 9.84” x 14.17” Inches (250x250x360mm)
  
• Net weight: 6.6 lbs.