- (1) DBX AFS2 Dual Channel Advanced DSP Feedback Suppression Processor w/ LCD display
- (1) Samson S-Max MD1 Professional Passive Mono Direct DI Box,18Hz–40kHz
- (2) Rockville RCXFM20E-B 20 Foot Female to Male XLR Mic Cable Black 100% Copper
Description of AFS2-V:
HEAR NO EVIL AND SEE NO EVIL.
The AFS2 Advanced Feedback Suppression processor has been completely re-designed to take the foundation of the best selling AFS224 and bring it to thte next level. The AFS2 now offers the highly-intuitive Wizard function that takes all of the guesswork out of setting up any room. The AFS2 also incorporates a completely re-designed Advanced Feeback Supression module. Best of all, the AFS2 now provides the user with a full LCD display setup and monitoring.
With its powerful DSP module, the AFS2 provides all the processing and control necessary for both installation and live use. Ten and twelve filter feedback elimination processors are the de facto standard, but the AFS2 offers a dedicated feedback suppression processor that offers up to 24 filters per channel with filter Qs up to 1/80 of an octave. To achieve these staggering numbers dbx utilized their improved AFS technology that had previously only been available in the upper echelon line of products and made it available in this stand-alone processor. In addition to the plethora of feedback suppression filters available, the AFS2 also offers selectable modes, live filter lift, and types of filtration, which are all readily available via the intuitive user interface front panel. With all of these state-of-the-art features in place, not only do you hear no evil, but you will now be able to see no evil. ®
Features:
- DBX AFS2 Dual Channel Advanced DSP Feedback Suppression Processor w/ LCD display
- Wizard Setup Function
- Full LCD Display
- dbx’s patented (Advanced Feedback Suppression) AFS™ technology
- 24 Programmable Filters per Channel
- Stereo or Dual Independent Channel Processing
- Live and Fixed Filter Modes
- Selectable Filter Lift Times
- Application-specific filter types include: Speech and Music Low, Med and High
- Input channel Metering
- 24 LED per Channel Filter Metering
- XLR and TRS Inputs and Outputs
Specifications:
- Number of Inputs: 2
- Input Connectors: Female XLR and 1/4” TRS
- Input Type: Electronically balanced/unbalanced, RF filtered
- Input Impedance: Balanced 50kΩ, Unbalanced 25kΩ
- Max input line level: +20 dBu
- CMRR: > 40dB, typically >55dB @ 1kHz
- Number of Outputs: 2
- Output Connectors: Male XLR and 1/4” TRS
- Output Type: Electronically balanced/unbalanced, RF filtered
- Output Impedance: Balanced >120 Ω, Unbalanced >60 Ω
- Max Output Level: +20 dBu
- A/D Converter: dbx Type IV™ Conversion System
- A/D Dynamic Range: >113 dB A-weighted, >110 dB unweighted, 22kHz BW
- Type IV Dynamic Range: >119 dB, A-weighted, 22kHz BW; >117 dB, unweighted, 22kHz BW
- A/D Conversion: 24-bit
- Sample Rate: 48kHz
- D/A Dynamic Range: 112 dB A-weighted, 109 dB unweighted
- D/A Conversion: 24-bit
- Dynamic Range: 109 dB A-weighted, 106 dB unweighted, 22kHz BW
- THD+Noise: 0.003% typical at +4 dBu, 1 kHz
- Frequency Response: 20Hz – 20kHz, +/- 0.5dB
- Interchannel Crosstalk: >80 dB typical
- Crosstalk input to output: >80 dB
- Operating Voltage: 100-120VAC 50/60 Hz - EU: 220-240 VAC 50/60 Hz
- Power Consumption: 9 W
- Unit Weight: 4.5 lbs. (2.04 kg)
- Dimensions: 1.75” (H) x 5.75” (D) x 19” (W), 4.4cm (H) x 14.6cm (D) x 48.26cm (W)
Authorized Samson Dealer!
Video of SAMD1PRO:
Description:
To The Max
The Samson MD1 Pro Mono Passive Direct Box combines premium sound circuitry
with durable, roadworthy construction, providing high-quality solutions for
line, instrument and speaker level signals. The MD1 Pro allows balanced lines to
be sent from your instrument long distances without inducing noise.
Custom STLX Transformers
The MD1 Pro features Samson's STLX Mu-Metal shielded transformer that
delivers an extended, flat frequency response with ultra-low distortion and
superior protection against hum and RF interference. The MD1 Pro's balanced
output provides a clean signal that is less susceptible to noise than an
unbalanced line, allowing for longer cable runs. The MD1 Pro also includes a
3-position 0dB/-15dB/-30dB attenuation switch to toggle between line and speaker
level signals.
Thru Jack
The MD1 Pro's Thru jack enables you to tap off the signal from the input and
pass the signal to an amplifier or monitor without affecting the original audio.
This can eliminate the need for miking guitar amplifiers, which depending on
your application may be preferable, especially as more musicians are using
in-ear monitors.
Roadworthy Construction
Housed in a 14-gauge steel chassis, the MD1 Pro is built to withstand the
abuse of the most demanding live tours. Its rigid outer shell protects all the
MD1 Pro's internal connections, switches and solder joints from failure,
ensuring quiet, reliable performance.
Features:
- Samson S-Max MD1 Professional Passive Mono Direct DI Box,18Hz–40kHz
- All-Metal, Impact Resistant Design
- Samson STLX Mu-Metal Shielded Transformer
- 3-Position 0dB/-15dB/-30dB Attenuation Switch
- Ground Lift Switch
- 1/4" Input and Thru
- Balanced XLR Output
- No Phantom or Battery Power Required
- Frequency Response of 18Hz–40kHz
Click here for the Owner's Manual
Video of RCXFM20E-B:
Description:
All Rockville pro audio cables are made with 100% copper which boosts the efficiency of the cable. There is nothing better than 100% copper. Most of the cheaper cables on the market do not use 100% copper, instead they make their cables with CCA (Copper Clad Aluminum). CCA cables do not perform on the level that 100% copper cables perform at. CCA will not conduct signals efficiently. A 12 gauge CCA cable will not even perform as well as a 14 gauge 100% pure copper cable, which will in turn, affect the performance and longevity of your equipment. If you find cables on the market that do not mention the copper content, there is a good chance that they are selling you a cheaper cable that is CCA and not 100% copper. Rockville pays an inspection company to oversee the manufacturing of the product to ensure that we provide a 100% Oxygen Free Copper Cable (OFC). Our OFC cables are less prone to oxidation, and will provide maximum signal transfer.
The other important factor of a cable is the shielding. Most of the good brands on the market have about 85% shielding coverage, so we decided to take our shielding a step further. Rockville cables are shielded with a tight copper mesh, covering 90% of the cable! The high percentage of coverage increases the ability to absorb the Electromagnetic Interference (EMI) and Radio Frequency Interference (RFI) that suppresses signal and degrades the performance of equipment. Rockville Cable’s copper shielding provides great flexibility, maintains a durable structural integrity, while decreasing signal interference ensuring enhanced signal clarity with every use.
Features:
- Rockville RCXFM20E-B 20 Foot Female to Male XLR Mic Cable Black 100% Copper
- XLR Connectors with Internal Strain Relief for Rugged Reliability
- 100% Copper Conductors for Enhanced Signal Clarity
- 90% OFC Spiral Shield for Effective EMI and RFI Rejection and Flexibility
- Length: 20 Ft
- Color: Black
- UPC:
- 613816420544
