- (2) JBL EON615 15" 2000 Watt 2-Way Powered Active DJ PA Speakers System w/Bluetooth Connectivity
- (1) Pair of Rockville Adjustable Tripod Speaker/Light Stands+(2) 20 Foot XLR Cables
- (2) Rockville Pro Mic Kit 1 - High-End Metal Microphone+Mic Stand+Carry Bag+Cable
- (1) Rockville DJ1500 DJ Headphones w/ Detachable Coil Cable, Case+Extra Ear Pad
- (1) Rockville RFAAW DJ Event Facade Light Weight Metal Frame Booth+Travel Bag+Scrim
Authorized JBL Dealer!
Description of EON615:
The EON615 from JBL is a 15" two-way powered speaker system with 1000W of Class-D amplification and two input channels. Designed for high-quality audio reproduction, portability and flexibility, the EON615 can be used in a variety of configurations and scenarios. It works as a single speaker, in a stereo set up with another top cabinet and a subwoofer, as a floor-monitor, or in permanent install applications.
The speaker features onboard factory EQ presets that allow you to set the system as a main house speaker, as a monitor speaker, or as a top speaker for use with an EON subwoofer. It also has a speech setting for increased vocal intelligibility in PA and announcement applications.
The rear panel provides XLR-1/4" combo inputs for each of the speaker's two channels, along with individual gain controls and signal presence LEDs. Both inputs are mic or line selectable and a master volume knob adjusts overall system level.
The EON615 also features an iOS and Android supported Bluetooth interface for controlling master volume, adjusting the parametric EQ, and saving and recalling user presets.
Features:
- JBL EON615 15" 1000 Watt 2-Way Powered Active DJ PA Speaker System with Bluetooth Connectivity
- 15" 2-Way Powered Speaker System
- 1000W Class-D Amplification
- Bluetooth Control for iOS and Android
- Onboard EQ Presets
- Crossover Contour for Adding an EON Sub
- Two-channel mixer with XLR-1/4” combination inputs
- Both inputs are mic or line selectable
- Convenient application EQ presets available from the back panel
- XLR loop-thru for routing signal to additional EON600 series speakers
Specifications:
- System Type: Self powered 15" (381 mm), two-way, bass-reflex
- Max SPL Level: 127 dB
- Frequency Range: 39 Hz to 20 kHz (-10 dB)
- Frequency Response: 50 Hz - 20 kHz (±3 dB)
- Coverage Pattern: 90 x 50°
- Amplifier: Class-D
- Power Rating: 1000 W (2 x 500 W)
- Dimensions (H x W x D): 27.8 x 17.3 x 14.4" / 70.7 x 43.9 x 36.5 cm
- Weight: 39.00 lb / 17.69 kg
- Package Weight: 46.5 lb
- Box Dimensions (LxWxH): 30.75 x 18.5 x 16.0"
All About Your RVSS2-XLR:
How To Set Up Your RVSS2-XLR:
How To Set Up Active and Passive Speakers to Your RVSS2-XLR:
How to Set Up Your PA Speaker Stands:
Video of RVSS2-XLR:
Description:
This heavy-duty universal stand can be used as a Speaker Stand or a Lighting Stand! It's sturdy steel construction and custom carrying case add to the quality and support this stand gives. The sturdy and expandable long tripod legs ensure that your speakers will be stable in any environment. This package also comes with two 20 foot XLR cables
Features:
- Adjustable Height
- Steel Construction
- Black Color
- Weight capacity: 100 LBS
- Adjustable Height Range: 47.25-78.75 inches
- Base spread: 15-40 inches
- Tube Diameter: 1.5 - 1.37 inch
- Leg Diameter: 1.37 inch
- Includes (2) 20 Foot XLR Female to XLR Male Cables
- Includes (1) Travel Bag
The Rockville Difference:
Whenever you see the Rockville shield on a product you know that it has the stamp of approval. While other companies simply import products from China, Rockville manufactures the products in China to lower your cost but do so under American style supervision and quality standards to get you that USA quality that you want!About Rockville Quality Control Procedures:
The Rockville brand stands for Quality, Innovation and Value. All Rockville products go through the most rigorous quality control standards in the industry. Products go through months of extensive testing before they reach your hands. All user functions are tested and all internal components are tested for quality.Rockville makes products that are virtually un-breakable! Rockville is one of the only brands in its class to test every concept model for weeks or months before starting production. Once production begins, Rockville sends product engineers to their factory to quality control every line of production. During production every product is tested and on top of that Rockville goes the extra mile and has their high level product engineers do an additional quality control. They test a certain percentage of all products from the production line a second time to ensure that the quality meets their vigorous standards, and to make sure that there is never a batch of products with even a slight problem. All Rockville products are backed with a full 1 year warranty, though it is unlikely that you will need to use the warranty.Great features and great quality make Rockville a great choice.
How to Set Up Your PRO MIC KIT 1:
Unboxing Video of PRO MIC KIT 1:
The
Rockville pro mic kit 1 was created in response to a need we saw in
the market for a very high quality microphone at an affordable price.
We feel there are a lot of good mics around from reputable brands that
sound great, but they are very expensive. When we looked at the
cheaper ones on the market from both reputable and entry level brands;
we were not impressed. We sent our product developers on a mic testing
journey. A lot of our employees here at Rockville love to do karaoke,
so it was not long before we found a mic that we all fell in love
with!
You may be asking yourself; so what makes this mic so good? Well,
there are 3 main components that make a mic sound the way it does. The
cartridge, the magnet, and the mic cable. Our mic uses an M-56
cartridge which has a neodymium magnet. This Particular combination of
components supplies better sensitivity; which means your mouth will
not have to be on the mic for it to pick up the sound. Our components
supply more than Just a great pickup pattern, They also has very
little background noise, and great tone.
We pay a lot of attention to detail. We could have saved lots of money
and got our cost down by including a cheap cable, but we know how
important the cable is. We are very Passionate about our products and
we really have a lot of respect for our customer’s standards. For this
reason, we included in this package a 100 % OFC copper cable. There is
no aluminum in this cable! This means the cable will last longer and
will sound A Lot better. Ultimately what you get Is a distortion free
signal. In addition we use a true gauge mic cable with proper
thickness.
The body of the microphone is also something we paid a lot of
attention too. We did not want it to be too light and feel cheap. We
made a nice solid metal microphone. It has a great feel to it. We
could have went with plastic or cheaper metal, but we wanted to create
a mic that we ourselves would want to use.
For the mic stand we include in this bundle, we made sure the height
adjusts high enough and that the stand is thick and sturdy enough for
anyone who will use it. We use plastic feet covers to stop unwanted
sliding. The stand tubing is made of iron. It is rock solid. We gave
the stand a beautiful black painted finish. Best of all, the stand is
totally portable weighing in at only 2.42 LBS!
We pay a lot of attention to detail so I would like to mention why we
went with a canvas carry bag. We sourced multiple bags and had
multiple options of bags. We ended up spending more money and going
with the better bag. It’s a great quality canvas travel bag that will
hold the mic, the stand, and all your mic accessories/cables. The bag
has 2 carry straps which allow you to carry it with your hands or on
your shoulders like a backpack. We also included internal sponge
padding and straps to separate the mics and the stand and keep them
both from rubbing against one another. You will be impressed with
every component we include in this bundle from the mic to the bag.
90 Day Money Back Guarantee including
return shipping!
If
within the first 90 days you are not 100 % satisfied for any reason,
contact us and we will send you a return label and give you all your
money back! (Item must be returned complete with all accessories and
the original box please).
What's Included:
- Fully
metal wired mic
- Mic
cable (XLR to ¼” 100% OFC Copper!)
- Mic
clip
- Metal
mic stand
- Canvas
carry bag
- Owners
manual
- Warranty
Features:
- Rockville Pro MIc Kit 1 - High-End
Metal Microphone+Mic Stand+Carry Bag+Cable
- Mic
Features:
- M-56
Cartridge
- Full
metal mic body
- Type:
dynamic
- Neodymium
magnet
- Polar
Pattern: uni-directional
- Frequency
Response: 80 - 13Khz
- Impedance:
600 Ohms ± 30%
- Sensitivity:
-72 ± 3dB
- Mic Stand Features:
- High
quality metal mic stand
- Made
of strong iron tubes!
- Black
Painted Finish
- Adjustable
height: 31.5 – 59 inches
- Weight:
Only 2.4 LBS!
- Plastic
feet covers to stop unwanted sliding
- Plastic
adjustable connector
- The
bottom part of base is made of 20MM thick iron
- Top
part of base is made of 15.2 MM thick iron
- Feet are made of 19MM iron
- Bag Features:
- High
quality canvas
- Comfortably
holds microphone, mic stand, cable and other mic accessories
- Other
bundles include plastic bags, this canvas bag will protect better
and can be thrown around without damaging your equipment
- Internal
belt ties to lock the mic and cable in place and separate it from
the stand
- Internal
separator separating the mic from the stand to eliminate them
rubbing together
- Internal
sponge padding for protection the gear in the bag
- High
quality zipper
- Bag
prevents equipment from getting scratched
- (2)
carry straps make it easy and comfortable to transport
- Straps
were built as handles to carry or as shoulder straps to carry them
like a backpack
- Bag
is made with scratch proof canvas
- Bag
can hold up to 22 pounds of gear! This is a very high quality bag!
- Stylish
Rockville logo on bag so you can do not confuse this bag with
someone else’s
- Dimensions
of Bag: 30.33” inches Length x 3.54” inches height
- Weight
of bag: 0.44 pounds
- Cable
Features:
- XLR
to ¼” Cable
- 20
Feet
- 100%
OFC oxygen free copper
- Cable
delivers crystal clear distortion free signal
- Cable
is 5 MM thick with cover (22 AWG standard mic cable)
- XLR
cable connectors are very solid and durable
- Mic
clip Features:
- Heavy
Duty Standard Size Microphone Clip
- Stand
Mountable
- Solid
Plastic Construction with copper inside (part that screws to the
mic)
- Black
Color
Video of Rockville DJ Facades and Accessories:
Video of RFAAW:
Each Set Includes:
- (4) Panels each 27.5” W x 47.2” H
- Stretchable White Scrim
- Carry Bag for easy Transport
- 3M Velcro
The Rockville RFAAW DJ Event Facade is the best in its class! Our Rockville employees have used all the popular Façades on the market and had so many frustrations, so we decided to make our own!
What makes ours way better:
1. Light-weight
Our panels are made out of pure aluminum! Other brands use steel which is not as durable and weighs a lot more. They use this material simply because it is cheaper. We had the option during product development to choose steel or aluminum. The steel would have cost $10 less actually. We went with the aluminum because it is lighter in weight and much stronger.
2. Larger panels
We made each of our panels 27.5” inches wide. We include 4 panels which totals 110” inches. Our competitors panels are too small. Their panels are around 17 – 20 inches wide each panel. That adds up to only 80” inches. You would have to use a pretty small table or buy 2 facades. I am talking from personal experience.
3. Foldable design for quick setup and break-down
Our design folds for easy setup and breakdown! Our competitors advertise that their item can fold and break down easily. I’ve used them, and you have to literally disconnect the hinges, and then next time you use them again you have to reconnect it. I do not consider it quick or easy. Ours literally just folds and you do not have to disconnect all the hinges. Our model is the only one I have seen on the market that truly folds for quick and easy transport.
4. 360 Degree panel rotation
Our panels can rotate a full 360 degrees, giving you the freedom to wrap these around a table and angle them perfectly to make your setup professional looking. One of the biggest issues that annoyed me the most about the competitor’s panels is that they have huge limitations in the angles of their panels. What was most annoying to me was that when you try to angle them how you want, they either got stuck or the hinges popped out and I had to set them up again and again. With the Rockville 360 degree rotating panels you are completely free to angle your panels easily without any limitations!
5. Built-in scrim!
The stretch fabric panels are easily removable for cleaning. Our scrim can be washed by hand in cold water and laid down flat to dry. Our scrim is also a fire retardant.
6. Travel bag included
Transportation and storage is simple with the included carry bag.
7. Non-slip rubber feet for stability
We decided to add rubber non-slip feet to our model. This adds more stability to the façade.
8. Expandable!
We sell models RAPFAW and RAPFAB which are add on panels so you can expand your black or white facade and have an unlimited amount of panels connected together. We also sell separately models RSCFAB and RSCFAW which are black or white scrims. This way you can interchange the color of your scrim depending on the event you are using this for. Another purpose of this is if you want to have one set in the wash you can still have a backup available.
8. Price!
I personally felt like I got ripped off when I paid over $250 for a DJ Event Façade. I did not see any reason for it to cost so much. I got even more upset when I put it together and it did not feel like $250. We decided to go to market with a product twice as good at half the price! We want the best gear to be affordable for everyone!
9. 90 Day Money Back Guarantee including return shipping!
If for any reason you are not 100% satisfied with your purchase we will send you a prepaid shipping label and refund you in full for this item. We know that this will be the best Façade you have ever purchased so it is highly unlikely you will want to return it.
Features:
- Rockville RFAAW DJ Event Facade with White Scrim and Travel Bag
- (4) Panels included – each are 27.5” W x 47.2” H
- Light Weight Aluminum Frames. The entire product weighs 7 LBS, around a third of the weight of our competitors who make their panels out of steel! Also our light-weight aluminum is much stronger than steel
- Includes travel bag for easy transport
- Includes white scrim
- Includes a carrying bag to store and keep facade scrim looking its best
- Folds for easy break down and travel – no need to disconnect the hinges!
- 360 degree rotating panels allows each panel to be positioned to your liking with no limitations
- Detachable hinges
- Includes white scrim made of a special stretch material
- Scrim is fire retardant
- Scrim is easy to wash – simply wash with cold water and lay it flat to dry
- Non-slip rubber feet for stability
- Expandable: Add additional panels sold seperately (models RAPFAW and RAPFAB)
- Additional scrims available in our store in black and white (models RSCFAB and RSCFAW)
- Product weight: 7 LBS
- Packaged shipping weight: 10 LBS
Includes:
- DJ1500 headphones
- Detachable cable
- Soft suede and leather ear cushions (interchangeable)
- Leather hard travel protective case
- Gold plated ¼” adapter
Video of DJ1500:
Description:
Rockville brings you Pro quality DJ headphones at an incredible price with its new DJ1500. These headphones are tailor made to meet the demanding needs of today’s DJs. The DJ1500 features large over-the-ear swiveling cups with superbly comfortable foam ear pads (interchangeable soft suede or leather finish cushions included) that seal tight around the ear for excellent sound isolation and minimal bleed. Inside these cups you’ll find 40mm Neodymium drivers delivering an extended frequency range and incredible bass response. You’ll hear pronounced vocals; rich, deep bass, rich mids, and crisp highs that will make mixing tracks a breeze. We’ve also incorporated exclusive sound isolation technology which helps to greatly reduce background noise.
The DJ1500 features a clean modern look with ergonomically designed ear cups that swivel 45° up and can flip around 180°. The headband is made of soft supple leather, offe
- UPC:
- 613815736639
