Package Includes:
- (4) Eliminator ADJ MEGA 64 PROFILE EP DMX RGB+UV LED Club DJ Par Can Wash Up-Light
- (1) American DJ LED RC2 RGBAW Wireless IR Remote Control Built-In Lighting Programs
- (1) Rockville R700 Fog/Smoke Machine w/ Remote+Fluid Quick Heatup, Thick Fog
- (2) Rockville RDX3M25 25 Foot 3 Pin DMX Lighting Cable 100% OFC Copper Female 2 Male
- (2) Rockville RDX3M10 10 Foot 3 Pin DMX Lighting Cable 100% OFC Copper Female 2 Male
What's In The Box:
- 1x Mega 64 Profile EP LED par can
- Includes scissor yoke to hang on truss, mount on a wall or set on the ground
- Power Cable Length: 1.8 meter (IEC)
Description:
The Eliminator Lighting Mega 64 Profile EP is a low profile LED Par with 12x 4W Quad LED (RGB+UV) designed for uplighting, stage lighting and wall washing. With a 25-degree beam angle and 64 built-in color macros, the Mega 64 Profile EP is great for permanent or portable lighting solutions to create smooth swaths of vibrant color.
The Eliminator Lighting Mega 64 Profile EP is a compact, low profile LED wash fixture designed for uplighting, stage lighting and wall washing, and will bring color and excitement to smaller sized events or small stage performance. The Mega 64 Profile EP is powered by twelve bright 4-Watt Quad (RGB+UV 4-In-1) LED and offers a unique, more vibrant color palette with the UV LEDs than traditional RGB fixtures.
This Par is intelligently designed so that it may sit directly on the ground or inside truss without the hanging bracket because the power & DMX Ins and Outs sit on the side of the fixture, not on the rear. Its feet and scissor yoke allow for maximum lighting versatility to be used as a floor wash or hung from truss or pipe.
The Mega 64 Profile E offers smooth color mixing with no RGB+UV shadows, has a 25-degree beam angle and has 5 DMX Channel modes for a variety of programming options. Users can also use the ADJ LED RC2 wireless remote, which is sold separately, to control the Mega 64 Profile EP.
Features:
- Smooth RGB Color Mixing (fast or slow color change operation) with no RGB+UV shadows
- Power & DMX Ins/Outs are intelligently designed to sit sideways so the unit can be set flat on the ground
- Great as an architectural wall wash or for performance stages where traditional stage lighting emit a lot of heat onto performers
- Flicker Free
Specifications:
Source:
- 12 x 4W Quad (RGB+UV 4-IN-1) LEDs
- Light Output: 3,520 LUX @ 2M; 820 LUX @ 4M (25-degree beam)
Control:
- DMX-512 protocol
- 5 DMX Channel Modes: 4/5/6/9/10 Channels
- 5 Operational modes: RGB+UV Dimmer Mode, Sound Active Mode, Auto Run Mode (16 Color Change Programs, 16 Color Fade Programs, & Color Change & Fade Combination),
- Static Color Mode, & DMX Controlled
- Stand Alone or Primary/Secondary Configuration
- 4-Button DMX LED Display
- 64 built-in Color Macros
- Refresh Rate: 504Hz
- Electronic Dimming: 0-100%
- LED Pulse and strobe effect
Connections:
- Linkable via 3-pin XLR cable
- Power: IEC In/Out to daisy chain power (Link up to 12 Mega 64 Profile Plus fixtures)
- With Wired Digital Communication Network
Electrical:
- Multi-voltage Operation: AC 100 - 240V, 50/60Hz
- Power Draw: 54W Max
- Fuse: 2Amp
Dimensions & Weight:
- Dimensions (LxWxH): 10.5” x 10.25” x 4.5”/ 261 x 260 x 110mm
- Weight: 5 lbs./ 2.1 kg.
American DJ Authorized Deal
Description:
Control your lights wirelessly with the ADJ LED RC2. This remote can handle any task and offers an easy interface so you can focus on your performance instead of finding the right button. Eliminate any hassle by setting the right mood and use this remote to create a stunning show.
Control red, green, blue, amber, and white LED colors with just the touch of a button. From simple to complicated tasks you will not have a problem using this remote. Ready for professionals and ready for enthusiasts. Change anything from the sound sensitivity to the program speed with a simple click. Need to find a program? Not a problem, simply press the program button and you will be on your way.
This wireless infrared remote can control up to 15 ft./4.5M. No show is complete without this ADJ LED RC2. Cut down on the time it takes to adjust the right settings and add this remote to your collection today.
Features:
- American DJ LED RC2 RGBAW Wireless IR Remote Control Built-In Lighting Programs
- Includes Red, Green, Blue, Amber and White LED control
- Wireless infrared remote control up to 15 ft/45M
- Black Out: Turns fixture On/Off
- Program Selection: Access units built-in programs
- Flash: Strobe effect mode
- Speed: Activates the speed control of programs
- DMX Mode Select
- Sound Active: Activates sound active mode
- Slave: Designates the fixture as a “slave” fixture in the Master/Slave configuration
- Set Address: Set DMX Address on a fixture
- RGBAW Buttons: Adjust RGBAW colors with the “+” and “-“ buttons
- + and – Buttons: Adjust flash rate speed, program speed, sound sensitivity and program selection
Advantages of purchasing from an authorized seller:
- Best prices - We sell all American DJ Products at the lowest price as possible.
- Full Factory Warranty
- Detailed information of all products
- Lifetime Customer Service by American DJ product Experts
- Guaranteed legitimate and authentic merchandise
Please note: If you purchase American DJ from an un-authorized seller then you are taking a big risk. You will not have any manufacturers warranty, and there is no guarantee that the item is authentic, brand new, or even working.
How To Set Up Your R700 Fog Machine:
Video of R700:
Description:
The Rockville R700 fog machine is a beast of a machine! This machine is around the same size as the Chauvet H700 machine and the American DJ VF400 machine. We feel ours is better for many reasons. We include both a wired remote control as well as a wireless timer remote. The wireless timer remote is going to be your best friend! You can hit a single button and the machine will disperse fog for 30 seconds. The fog will stay in the air for a while, and every now and then you can hit the timer remote button again.
Our model has the fastest start time on the market! We rate it at 3.5 minutes, however when I was personally testing it, it started dispersing fog in 2.2 minutes! Our machine also is the leading model on the market! It can produce 3,000 cubic feet per minute of fog! It produces a very thick amount of fog that stays in the air for a long time before slowly dissipating. It uses a standard water based fog fluid. So you can use the Rockville fluid or you can use fluids made by other famous companies like Chauvet or American DJ.
The build quality of the Rockville R700 is incredible! It can be thrown around and take a good beating without ever breaking down!
Includes:
- 1 x R700 Top Quality Fog Machine
- 1 x Wired Remote
- 1 x Wireless Timer Remote
- 1 x pint of Fluid
- 1 x Warranty Card
- 1 x User Manual
Fluid available in our store at all times, you can order fluid refills along with this now, or you can always purchase more fluid from us in the future whenever you need a refill.
Features:
- Output: capacity 3,000cfm (cubic feet per minute)
- 3.5 minute start time (fastest on the market for a similar priced unit)
- Manual fog button
- Wired remote included
- Wireless timer remote included. Hit one button and 30 seconds of fog will come out
- Water-based fogger compatible with standard fog fluid made by Rockville, Chauvet, American DJ, Visual Effects, and other famous brands
- 10 Fluid ounce tank capacity
- Fluid consumption: 10 Fluid Ounces per hour
- Our fog machine will output literally twice as much as other machines being sold by other famous brands. Ours is way better. If you are not happy with it, we will send you a pre-paid label and give you all of your money back
- Compact and powerful. This machine is portable yet more powerful and reliable than machines triple the price
- Strong enough for indoor or outdoor use
- This machine produces a thick fog capable of staying in the air for a long time
- Perfect for DJ use, bars, karaoke parties, etc.
- Power and current: 110V, 60Hz: 440W, 5A operating
- AC power: 110V Only
- Unit Weight: 3.3lbs
- Unit Dimensions (Inches): 9.1" x 5.1" x 4.3"
- Shipping Weight: 3.7 LBS
- Shipping Dimensions (Inches): 9.8" x 6.7" x 7.9"
Video of RDX SERIES:
Description:
Rockville High Performance Cables are designed to provide efficient signal transfer for every application. Our Nickel-Plated, OFC (Oxygen-free copper) conductors assure that you have enhanced signal clarity with every use. Shielded for Superior EMI and RFI rejection, Rockville High Performance Cables are an ideal choice for all your lighting connection needs.
True, real DMX cables must be 120 ohms. Rockville DMX cables meets this specification.
Microphone cables are a lower impedance (ohms), and the difference in capacitance and twisting ratio makes it terrible for DMX signals.
Be sure to buy true 120 ohm DMX cables from reputable brands such as Rockville, Chauvet, American DJ.
Features:
- Rockville RDX3M25 Black Nickel Plated 3-Pin Male-Female DMX Cable
- OFC Conductors for Enhanced Signal Clarity
- XLR Connectors with Internal Strain Relief for Rugged Reliability
- Hi-density OFC Braided Shield for Superior EMI and RFI Rejection
- Impedance: 120 Ohm
- Length: 25 Ft
Video of RDX SERIES:
Description:
Rockville High Performance Cables are designed to provide efficient signal transfer for every application. Our Nickel-Plated, OFC (Oxygen-free copper) conductors assure that you have enhanced signal clarity with every use. Shielded for Superior EMI and RFI rejection, Rockville High Performance Cables are an ideal choice for all your lighting connection needs.
True, real DMX cables must be 120 ohms. Rockville DMX cables meets this specification.
Microphone cables are a lower impedance (ohms), and the difference in capacitance and twisting ratio makes it terrible for DMX signals.
Be sure to buy true 120 ohm DMX cables from reputable brands such as Rockville, Chauvet, American DJ.
Features:
- Rockville RDX3M10 Black Nickel Plated 3-Pin Male-Female DMX Cable
- OFC Conductors for Enhanced Signal Clarity
- XLR Connectors with Internal Strain Relief for Rugged Reliability
- Hi-density OFC Braided Shield for Superior EMI and RFI Rejection
- Impedance: 120 Ohm
- Length: 10 Ft
