Package Includes:

• (2) Presonus R65 V2 6.5" 140w Bi-Amped Active Studio Reference Monitor w/AMT Tweeter
• (1) Rockville RockMix 4 Channel Mic/Instrument Pro Recording Mixer+USB Interface/EQ
• (2) Rockville RCTR110B 10' 1/4'' TRS to 1/4'' TRS Cable, Black, 100% Copper

---

Description:

You won't miss a thing.

Clarity is king—and with the R65 V2s, you'll hear every single detail in your music: the gentle breath in every exhale, the subtle finger noise in a nylon-string classical guitar; the nuanced overtones of brass and woodwinds; and exquisite reverb tails that decay gracefully into the void. Not only will your mixes sound their absolute best on R65 V2, but you'll also be able to hear trouble spots in your tracks with surgical clarity. If you're mixing or mastering high-resolution audio, the R65 V2 will ensure that you'll hear every detail captured in your recordings.

Air and transient response.

Driven by a dedicated 65 watt Class A/B amp, the R65 V2's custom-designed 6.8-square-inch Air Motion Transformer (AMT) excels at accurate reproduction of the highest of high frequencies—those responsible for a sense of air, space, and dimensionality. And the AMT's astonishingly thin (< 0.01 mm) folded Kapton® membrane allows the tweeter to move in the same instant as the voltage cycles that power it, providing nothing less than wave cycle-accurate transient reproduction.

Wide with pride.

The unique AMT design also allows the R65 V2 to handle 8 to 13 times the projection area of more traditional tweeter designs, while the R65 V2's unique housing constrains this projection area to the horizontal axis. The result is a very wide sweet spot with focused vertical dispersion, —minimizing reflections off of your desk, ceiling, and floor that could otherwise introduce problematic phase and coherence issues. And because it's less subject to room-anomaly interference, the R65 V2 studio monitor reacts predictably and sounds consistent, even if moved to different listening environments.

The lowdown on the down-low.

R65 V2's woofer is six and a half inches of rigid, custom-woven composite that offers consistent dispersion across its frequency range for the flattest response we could design. A dedicated 75 watt Class A/B amplifier provides ample headroom and impressive distortion-free, non-fatiguing performance—even at higher volumes.

The new versatility.

Improving the respected R-series classics wasn't easy, but we found a way: by giving you more control than was available on the original R65. The updated R65 V2 features analog acoustic tuning controls that will be familiar to users of our celebrated Eris® line—you get Low Cut, Mid Frequency, and High Frequency controls, as well as a three-way Acoustic Space switch that allow you to easily compensate for the sonic consequences of speaker placement against a wall or in a corner. We also added a new Class A/B amplifier to provide an even warmer and smoother overall frequency response.

Studio monitor connections.

Of course, you also get classic PreSonus monitor connectivity, as R65 V2 provides balanced XLR, balanced ¼-inch TRS, and unbalanced RCA line-level inputs, so you can hook them up to an audio interface, mixer, monitor controller, or almost any other line-level source. If you'd like to add Bluetooth connectivity.

Accuracy defined.

The R65 V2 studio monitor provides lifelike audio reproduction that will allow you to hear the room in your recordings. Its transparent sound and responsive transient reproduction makes it an ideal solution for anyone who is mixing high-resolution audio. The exact same AMT technology that provides the R65 V2's natural-sounding, honest playback also ensures that potential trouble spots in your mixes won't slip past your critical ear.

Hear the R65 V2 studio monitors at your favorite PreSonus® dealer.

Features:

• 2-way active AMT tweeter design provides articulate high-frequency response, wide stereo imaging, and narrow vertical dispersion
• Custom-designed, 6.8-inch, AMT tweeter responds to the subtlest waveforms and the highest frequencies for audiophile-grade air and space
• 6.5-inch LF drivers provide transparent mid- and low-frequency reproduction for clean, punchy bass
• Biamped, 140 W RMS (LF = 75 W, HF = 65 W) Class A/B power amplifier with switching power supply
• Acoustic tuning controls (Low cut, Mid, High, Acoustic Space) compensate for room acoustics and placement
• Studio One Prime and Studio Magic Software Suite ($1,000 value!)
• Balanced XLR and ¼-inch TRS plus unbalanced RCA inputs provide flexibility for seamless integration into any environment
• Toroidal power transformer eliminates noise and hum
• System protections include RF interference, output current limiting, over-temperature, turn-on/off transient, subsonic filter, external mains fuse
• Power: 100-120 V ~50/60 Hz or 220-240 V ~50/60 Hz

Specifications:

Inputs

• 1- Balanced XLR
• 1- Balanced ¼" TRS
• 1- Unbalanced RCA

Performance

• Frequency Response: 45 Hz - 22 kHz
• Crossover Frequency: 2.7 kHz
• LF Amplifier Power: 75W Class AB
• HF Amplifier Power: 65W Class AB
• Peak SPL (@ 1 meter): 104 dB
• LF Driver: 6.5" woven composite
• HF Driver Type: AMT
• Diaphragm: 6.8-inch2 (4,400 mm2)
• Equiv. Diaphragm ø: 3" (75 mm)
• Input Impedance: 20 kO balanced, 10 kO unbalanced
• SNR (typical, A-weighted): >100 dB

User Controls

• Volume Range: A-type taper
• High-frequency Control: +/- 6dB shelf @ 10kHz
• Mid-frequency Control: +/- 6dB @ 1kHz
• Low Cut: Flat, 80Hz, or 100Hz
• Acoustic Space: Flat, -2dB or -4dB

Protection

• RF interference
• Output-current limiting
• Over-temperature
• Turn-on/off transient
• Subsonic filter
• External mains fuse

Power

• Factory preprogrammed: 100-120V ~ 50/60 Hz or 220-240V ~ 50/60 Hz
• Standby Power: < 0.5W

Cabinet

• Vinyl-laminated, medium-density fiberboard

Physical

• Width: 8" (203 mm)
• Depth: 10.3" (261 mm)
• Height: 13" (328 mm)
• Weight: 14.7 lbs (6.65 kg)

---

All about your ROCKMIX 4:

How to Set Up Your RockMix 4:

What's in the Box:

• Mixer with USB recording interface
• USB cable
• USB power adapter
• 4 Non-slip rubber feet pads
• Owner manual and warranty card

Recommended Applications:

• Live Stream/recording/podcasting/broadcasting, zoom/conference meetings, etc
• 2 person live stream or recording with (2) mics and a stereo instrument
• 3 person band with a singer, a guitar player, and a keyboard player

Features:

• Rockville RockMix 4 Channel Mic+Instrument Pro Recording Mixer with USB Recording Interface
• Bit Depth: 16 bit
• Sample Rate: 48kHz
• Assignable USB Record Source
• Switchable +48v Phantom Power on channels 1 & 2 for use with condenser microphones
• Channel 1 and Channel 2: XLR and ¼" TRS combo input jacks
• Channel 2: mic/instrument level switchable allowing you to connect a mic, instrument, or any other audio device
• Stereo channel 3 and 4 have ¼" inputs (balanced or unbalanced)
• CH3 & CH4 with GAIN switch and LEVEL control
• Independent Level Controls for Main and Headphone/Monitor Outputs
• Integrated Plug-and-Play USB Audio Interface for Mac & PC
• Operates on USB BUS Power or 5V DC External Power Supply (Included)
• 3.5mm aux input jack for sound effects or background music
• Low power consumption means you can power the mixer from the USB of your laptop or by plugging it into an outlet or through a standard 5V powerbank
• Super mini 4-channel mixing console designed for home studio recordings or live broadcast streaming
• (2) headphone outputs (¼" and 3.5mm)
• ¼-inch TRS Stereo Output
• ¼" Stereo Monitor Output
• Additional 3.5mm mic input allow you to connect an additional microphone to channel 1
• Channels 1 and 2 each have a 2-band EQ and Pan controls and gain controls
• TO PC slide switch allows you to select which channels get sent to your computer (DRY CH1-2/ INPUT MIX/ LOOPBACK)
• Clip LED indicators
• Monitor mute button
• Monitor/headphone level control knob
• Main mix level control knob
• No external drivers are needed for mac or PC

Specifications:

Input Connections:

• XLR & ¼-inch Balanced Combi-jack (CH 1 & CH2)
• ¼-inch TRS Balanced (CH3 & CH4)
• 1/8-inch TRS Aux/MP3, 1/8-inch Headset Mic

Output Connections:

• ¼-inch TRS Balanced Main Mix Outputs
• ¼-inch TRS Stereo Output & Monitor Outputs
• 1/8th-inch Headset Output
• CH1 XLR: 1.5mV/2.2k ohm
• CH2 XLR: 2.5mV/2.2k ohm
• CH1 Jack: 10mV/12k ohm(line)
• CH2 Jack: 15mV/240k ohm
• CH3/4: 550mV/22Kohm
• Signal to Noise Ratio: > 90dB Typical (Ref 0dBu)
• Maximum Input Level: +8dBu (Mic), +16dBu (1/4-inch Input)
• Maximum Output Level: +15dBu Main Mix Outputs
• Maximum Gain >55dB (Mic), >37dB (Instrument), 5dB (CH3 & CH4)
• USB Computer Interface USB Class Compliant plug-and-play Mac / PC Interface
• AUX IN: 280mV/10Kohm
• Output Level: main mix out--max.6.5V, stereo out-- 1.0V, phone/monitor out-- max. 6.5V
• Frequency Range: 10-33000Hz, +/-3dB
• THD: <= 0.05%
• Low Range: ±15dB/80Hz
• High Range: ±15dB/12kHz
• Headphone: Impedance: >=8 ohm
• Phantom Power: +48V
• Power Supply: USB 5V 500mA  Via USB or 5VDC @ 500mA
• Operating System: Windows 2000/XP/7/Vista or higher; Mac OS 9.1/ OS X or higher
• Item Size: 190*130 *47mm / 7.48 * 5.11 * 1.85in
• Item Weight: 716g / 1.58lbs
• Package Size: 24 * 17.5 * 10cm / 9.4 * 6.9 * 3.9in
• Package Weight: 1015g / 2.24lbs

---

Video of RCTR CABLES:

Video of RCTR110B:

Description:

Rockville High Performance Cables are designed to provide efficient signal transfer for every application. Whether on stage, in the studio or at home, our Nickel-Plated, OFC (Oxygen-free copper) conductors assure that you have enhanced signal clarity with every use. Shielded for Superior EMI and RFI rejection, Rockville High Performance Cables are an ideal choice for all your audio connection needs.

Features:

• Rockville RCTR110 Nickel-Plated, 1/4'' TRS to 1/4'' TRS Balanced Cable
• 100% Copper Conductors for Enhanced Signal Clarity
• OFC Spiral Shield for Effective EMI and RFI Rejection and Flexibility
• Length: 10 Ft
• Color: Black