Package Includes:

• (2) KRK CL7G3 CLASSIC 7" Studio Monitor Active Powered Bi-Amped 2-Way Speaker
• (1) Rockville RVSM5 Pair Studio Monitor Bookshelf Speaker Stands w/Adjustable Height

---

Description:

Building on KRK's legacy of sonic accuracy and performance, the new KRK CLASSIC series of powered studio monitors incorporate over 30 years of innovation from the world's leading studio monitor manufacturer. Borrowing concepts from previous ROKIT lines—some of the most used studio monitors in the world, the CLASSIC series defaults to a new flat frequency solution towards more critical listening—translating into more accurate mixes. With the optional ability to engage the +2 dB KRK Bass Boost, the CLASSIC series can also provide the enhanced bass response and sound that music creators around the world have loved for years.

The CLASSIC series are active (self-powered) two-way studio monitors that utilize a 1" textile soft dome tweeter paired with a 5", 7", or 8" (depending on the specific model) glass aramid woofer. The built-in biamped power amplifiers provide a total of 50, 73, or 100 watts of power (again, depending on the model), and all models in the series deliver natural and balanced spectral response with low distortion and superior stereo imaging. With KRK studio monitors, you'll hear every nuance of the audio being reproduced.

Specifications:

• Classic Family: Classic 7
• Configuration: 2-Way
• System type: Active Studio Monitor
• Low-Frequency Transducer: 7" Glass Aramid Woofer
• High-Frequency Transducer: 1" Textile Soft Dome Tweeter
• Frequency Response (+/- 3dB): 47.5Hz - 34.5kHz
• Frequency Range: (-10dB) 37Hz - 40kHz
• Crossover Frequency: 2.3kHz
• Average Beam width (Horizontal): 140 Degrees (900 Hz - 9 kHz)
• Average Beam width (Vertical): 115 Degrees (900 Hz - 9 kHz)
• Max Peak SPL (With Limiter): 101 dB
• Max Average SPL (With Limiter): 99 dB
• Max Calculated SPL: 102 dB
• Amplifiers: Class A-B
• High Frequency Power Output (Watts): 25 Watts
• Low Frequency Power Output (Watts): 48 Watts
• Amplifier Distortion (THD+N): < 0.1% THD+N 20 Hz - 20 kHz (-3 dB Max Power)
• Input Impedance (Ohms): 10 KΩ Balanced / 7 KΩ Unbalanced
• Input Sensitivity: -3 dBu Balanced / -12 dBV Unbalanced
• SNR (Signal to Noise Ratio): > 98 dB
• Controls: System Volume -30 dB - +6 dB
• LF Level Adjust: (-2 dB, -1 dB, FLAT, +2 dB) Below 200 Hz
• HF Level Adjust: (-2 dB, -1 dB, FLAT, +1 dB) Above 2.3 kHz
• Indicators: Power
• Input Connectors: RCA, Balanced 1/4" TRS, Balanced XLR
• Output Connectors: N/A
• AC Fuse (Slow Blow / Time Lag): 120 VAC (T1.6AL, 250 V) 240 VAC (T800mAL, 250 V)
• Idle (Mute) AC Power Consumption: 13 Watts (NA SKU)
• Idle (Standby) AC Power Consumption: < 0.5 Watts
• Maximum AC Power Consumption: 108 Watts (NA SKU)
• Enclosure Construction: 15 mm MDF / High Impact Polystyrene
• Finish: Black Vinyl Wrap
• Grille: N/A
• Hardware: Foam Isolation Pads
• Product Dimensions (H x W x D): 11.40" (290 mm) x 8.90" (226 mm) x 13.07" (332 mm)
• Product Weight: 12.95 lb (8.39 kg)

---

All About Your RVSM5 Stands:

How To Set Up Your RVSM5:

Includes:

• 2 stands
• 2 sets of rubber feet for hard surfaces
• 2 sets of spikes for carpet floor
• Adjustable speaker shelf
• Hex key (assembly is just 2 screws)
• Cable clips

Description:

The Rockville RVSM5 is not your ordinary speaker stand. This stand is perfect for studio monitors and bookshelf speakers. It is a best-in-class stand with all the features you want. It starts with a solid steel base that has an elegant rounded triangular shape. You can adjust the height easily with quick-access hand tightening knobs. You can also adjust the width of the speaker tray to ensure a snug fit with any speaker. The speaker tray has thick foam to eliminate unwanted vibrations.

We include feet for hard floors as well as carpet spikes. We also include snap-on cable clips that will allow you to neatly run your speaker cables. This steel stand is super strong with a weight capacity of 100 lbs. per speaker.

Features:

• Rockville RVSM5 Adjustable Height Studio Monitor Stand with Solid Base and Adjustable Speaker Platform
• Speaker stand Height adjustment: 33" to 52"
• Speaker tray is adjustable from 5.9" to 13.4" (Fits any bookshelf style speaker up to 100 Lbs.)
• Speaker tray has edges and it will adjust to the width of your speaker
• Speaker tray has thick foam padding to reduce speaker vibrations
• Hand tightening knobs to adjust tray width or height
• Includes rubber feet for hard floors and spikes for carpet
• Snap-on Cable clips included to hide cables
• Elegant and stable design with rounded triangular base plate
• Solid Steal
• Perfect for studio monitor speakers and home speakers
• Load Capacity: 100 lbs. per stand