- (1) Rockville K5 W15K5S4 15" 2000w 4 Ohm Car Audio Subwoofer Sub 500w RMS CEA Rated!
- (1) Rockville dB25 v2 3000w Peak/750w RMS 2 Channel Amplifier Compact Car Stereo Amp
- (1) Rockville RWK41 4 Gauge Complete Car Amp Wiring Installation Wire Kit with RCA's
- (1) Rockville RSV15 15" Vented Car Audio Subwoofer Box 2.6 Cubic Ft.Sub Enclosure
- 10 Drywall Wood Screws (Wood screws are the type of screws; the screws are actually made of metal)
- 12 Feet of 14 AWG Blue Speaker Wire
- 2 Spade Terminals
Features of W15K5S4:
- Rockville W15K5S4 K5 Series 15" 4-Ohm Car Subwoofer
- Peak Power Handling: 2000 Watts
- Program Power Handling: 1000 Watts
- CEA Rated RMS Power Handling: 500 Watts
- 2.5" 4-Layer Black Aluminum Voice Coils Wound with OFC (100% Copper) Wire
- The wire we use to wind the voice coil is imported from Japan which is way better quality than the standard China wire
- 60 Oz High Quality Magnet
- Cast Iron Basket With Black Sanded Finish
- Fiber Reinforced Ultra Stiff Black Non-Pressed Paper Cone – This cone is very efficient which makes the speaker sound louder even without requiring a lot of power to push it
- Thick Foam Surround Provides Incredible Sound Quality With Minimal Distortion
- Blue Stitching Cone Reinforcement Ensures Long Life
- Paper Dust cap is light weight and efficient helping the sub to play louder even if your amp is not so powerful
- Chrome-Plated Binding Post Terminals - These are the best terminals on the market and they accept any gauge wire
- Impedance: Single 4-Ohm Voice Coils
- Vented Hole on T-yoke Enhances Heat Dissipation
- Rubber Boot Magnet Covers Make the Woofer Look Nice and Protects the Magnet
- Mounting Gasket with Rockville branding looks great and Makes it Easy To Mount the Subwoofer Air-Tight
- High BL Magnetic Motor Gap
- We use the highest grade black glue that handles extremely high temperatures which allows our woofer to handle even more power than they are rated
- Cutout Diameter: 13.85 inches
- Mounting Depth: 5.98 inches
- Frequency Response: 28.6 Hz - 1.0K kHz
- 6mm T-Yoke + 8 mm Washer
- Sensitivity: 90.1dB
- Sealed Enclosure Volume:1.5 – 2.5 Cubic Feet
- Vented/Ported Enclosure Volume: 2.0 – 3.5 Cubic Feet
- Weight: 13.4 Lbs.
- Shipping Weight: 15.4 Lbs.
- Shipping Box Dimensions: 16.53x 16.53 x 9.76 Inches
Detailed Info:
- Body: Non-Pressed Paper
- Gap Plate Inside Diameter: 85mm (3.34 inches)
- Gap Plate Outside Diameter: 170mm (6.69 inches)
- Gap Plate Thickness: 25mm (0.98 inches)
- Yoke Outside Diameter: 156mm (6.14 inches)
- Yoke Thickness: 6mm (0.23 inches)
- Yoke Pole Diameter: 60mm (2.4 inches)
Video of RWK41:
Unboxing Video for RWK41:
Description:
The Rockville RWK41 4 AWG (American Wire Gauge) amp kit has the following differences over other amp kits on the market at this price point.
1. Our RCA cables are 100 % copper. These are top of the line RCA cables
2. Better Resistance: The only thing that really matters with wires is the resistance rating. This is a measurement of conductivity and how much signal is loss per foot of wire. Since Rockville wires are made with around 3 times as much copper as any other wire at this price point, these wires had a much better resistance rating which means they will transfer more power to your amps than the other brands.
3. We do not cheat you on the thickness of the wire. These are standard American wire gauge thickness. This is another reason our conductivity is better than anything else at this price point. Other brands in the market place write 4 gauge, but cheat you on the thickness. We are honest about the thickness.
4. The Rockville amplifier installation kits feature a new soft abrasion proof insulating jacket. This rugged PVC outer jacket allows for 100% improved flexibility over standard power cables making them extremely easy to route through your vehicles interior, and it maintains exceptional resistance to grease and oil. The PVC outer jacket can with-stand an extreme temperature range of -40 to 220 degrees F.
The RCA signal transfer cables included in this kit feature blue and silver twisted pair technology in a clear outer jacket insulation skin. Not only do the blue and silver wires look cool but they also provide superior signal transfer with maximum noise suppression. They are 100% copper to provide absolute lossless perfect signal transfer to your receiver. This technology reduces interference, so your audio signal flows clean and pure at all power levels.
This kit also includes a massive 60 Amp AGU Gold Plated Fuse, so you can be sure it will handle the all the DC power that your amp will need without even the slightest loss of current. The included 7 split loom tube provides protection for your power cable from the typically harsh environment found under the hood of your car.
Audiosavings product experts have tested this amp kit against many leading amp kits on the market and were were impressed not only by the great looks but by the quality of these Rockville installation kits as well. These kits had a lower resistance rating than the other brands we compared and tested them against. What this means is that Rockville manufactures their kits with more copper than other kits at this price point, ultimately providing your amplifiers with better and cleaner DC power, so they work cooler and more efficiently. You will hear the difference a Rockville installation kit will make!
Features:
- 1 – 17’ High Grade Twisted Pair of 100% Copper RCA Cable
- 17’ – 4 Gauge Translucent Blue SuperFlex Power Cables
- 17’ – 18 Gauge Blue Remote Cable
- 17’ – 16 Gauge Clear Speaker Wire
- 3’ – 4 Gauge Clear SuperFlex Ground Wire
- Gold Plated AGU Heat Resistant Fuse Holder
- 60 Amp AGU Gold Plated Fuse
- 7’ Split Tube Loom
- Accessories Included: Wire Ties, Ring Terminals, Butt Connectors, Spades, and Grommets
Description of RSV15:
The RSV15 is a single 15" vented subwoofer box is made in the USA with Grade “A” ¾” MDF wood. This enclosure is made with precision cutting machinery by industry experts that have been making these enclosures in the USA for over 20 years. All Rockville enclosures come with a customized enhanced glue that is unmatched by any other manufacturer. That means that the carpet will stay in place and not rip or tear. The ¾” USA MDF is much stronger then any type of import wood. This will keep your box performing at an optimal level by not flexing and distorting your woofers. Your woofers will thank you! EVERY Rockville enclosure is not only glued at all joints but stapled as well. If that wasn’t enough we add a layer of silicon to every seam! This makes your Rockville enclosure rock even more!
MADE IN THE USA WITH PRIDE!
Features:
- Rockville RSV15 Single 15" 2.6 cu. ft. 3/4" MDF Vented Subwoofer Enclosure Box
- Machine precision cut mounting holes
- ¾” USA Heavy Duty MDF Construction
- Top of the line Glue for extra durable adhesion
- High quality GOLD spring loaded terminals
- Designed, tested, and engineered to work perfectly with high powered subs
- Designed to give the best sound quality
- Tuning frequency: 32Hz
Enclosure Measurements:
- Type of Enclosure: Ported/Vented
- Enclosure Sub Size: Single 15"
- Dimensions in Inches: 21" x 18" x 16.25"
- Top and Bottom Depth: 16.25"
- Mounting Depth: up to 15" (enough depth for any shallow sub on the market)
- Gross Volume Per Sub (Measurement for the outer dimensions of the box): 3.5 Cubic Feet
- Net Volume Per Sub (Measurement for the outer dimensions of the box less the thickness of the wood): 2.6 Cubic Feet
About Rockville Quality Control Procedures:
The Rockville brand stands for Quality, Innovation and Value. All Rockville products go through the most rigorous quality control standards in the industry. Products go through months of extensive testing before they reach your hands. All user functions are tested and all internal components are tested for quality. Rockville makes products that are virtually un-breakable! Rockville is one of the only brands in its class to test every concept model for weeks or months before starting production. Once production begins, Rockville sends product engineers to their factory to quality control every line of production. During production every product is tested and on top of that Rockville goes the extra mile and has their high level product engineers do an additional quality control. They test a certain percentage of all products from the production line a second time to ensure that the quality meets their vigorous standards, and to make sure that there is never a batch of products with even a slight problem. All Rockville sub enclosures are backed with a full 30 day warranty, though it is unlikely that you will need to use it.Complete Single Subwoofer Enclosure Installation Kit!
Includes:
- 10 Drywall Wood Screws (Wood screws are the type of screws; the screws are actually made of metal)
- 12 Feet of 14 AWG Blue Speaker Wire
- 2 Spade Terminals
This accessory package includes everything you need to install one subwoofer into an enclosure, and wire to connect the enclosure to your amplifier. This package is a top of the line accessory package which we put together and tested.
The drywall wood screws were hand selected by our installation experts because they drill into the enclosure very cleanly, without chipping the enclosure. The speaker wire is 14 gauge. This is way better than using 16 gauge. You can be 100 % sure that your enclosure will have a clean signal to the amplifier with this top of the line speaker wire. These spade terminals have also been hand selected by our installation experts to make the internal wiring simple, secure, and to run the audio signal cleanly.
Includes:
- Rockville dB25 V2 Amplifier
- Birth Sheet with Tested Power Ratings
- Owner's Manual
- Mounting Screws
- Allen Keys for terminals
- Extra Maxi Fuses
Description:
Rockville dB25 V2 – 3,000 Watt Peak / 750W Dyno-Certified RMS Class D 2-Channel Car Amplifier – Power, Precision, and Performance
Experience unmatched sound quality and powerful performance with the Rockville dB25 V2. This newly enhanced Class D 2-channel amplifier features a compact design that delivers high-quality sound without compromising power. Perfect for car audio enthusiasts, the dB25 V2 boasts a Dyno-Certified RMS of 750 watts and a peak power of 3,000 watts, ensuring your audio is loud, clear, and precise.
Features:
- Dyno-Certified Power: The dB25 V2 amplifier delivers verified RMS ratings through precise Dyno testing:
- 350W RMS x 2 channels at 2 Ohms
- 225W RMS x 2 channels at 4 Ohms
- 750W RMS bridged at 4 Ohms
- All with less than 1% Total Harmonic Distortion (THD) at 14.4V DC using a 1 kHz test tone. Engineered to compete with leading brands, this amplifier provides exceptional, professional-grade sound quality.
- Premium Audio Quality: With a wide frequency response range of 6Hz to 60KHz, a signal-to-noise ratio of 99dB, and minimal THD at rated power, the dB25 V2 ensures crystal-clear sound that rivals high-end systems.
- New Class D power supply: offers improved efficiency with reduced current draw from your battery, minimizing the chances of dimming headlights and other electrical issues. Additionally, this design stays cooler than a traditional Class A/B amplifier.
- Compact Dimensions: Measuring 11.26" L x 5.51" W x 1.97" H, this amplifier is easy to install in tight spaces.
Advanced Features:
- Fully Adjustable 12dB Crossover: Customize your sound with differential circuitry, offering low-pass (50Hz - 250Hz) and high-pass (60Hz - 1.2KHz) filters.
- Protection Circuitry: Features under-voltage and over-voltage protection, as well as full IC-controlled circuitry for safe and reliable operation.
- 12dB Bass Equalizer: Enhance your bass for a rich, immersive audio experience. (Boost is set at 45Hz.
- High-Speed MOSFET Power Supply: Delivers stable power with maximum efficiency and minimal distortion.
Ease of Use and Installation:
- RCA Line Output and 8-Volt Preamp Circuitry: Seamlessly integrates with your car audio setup.
- (3) 25A Fuses: Added protection for reliable performance.
- 4-Gauge Power and Ground Terminals: Ensures secure connections for optimal power delivery.
- 12-Gauge Speaker Wire Compatibility
- RCA Input: Simple connection for your audio sources.
- Power and Protect LEDs: Quick status updates.
- Sleek Design: Finished with an anodized aluminum body and an LED-lit Rockville logo for a professional appearance.
- UPC:
- 613817166526
