Package Includes:
- (1) Se Electronics T2 Studio Recording Microphone w/Titanium Capsule+Shockmount+Case
- (1) Rockville Kick Drum/Guitar Amp Mic Stand, Steel Round Base+Fixed Boom+Rubber Pad
- (1) Rockville RCXFM20E-B 20 Foot Female to Male XLR Mic Cable Black 100% Copper
What's in the Box:
- T2 Microphone
- Custom Shockmount + Thread Adapter
- Metal Case
Description:
Titanium makes the difference
The T2 appeals with its down-to-earth elegance, offering discrete electronics prioritizing the features you really need. With titanium being much stiffer and three times lighter than gold, your transients will never be the same.
Recommended Use
Drums, percussion, overheads, hi-hats, orchestral + strings, piano, bass guitar cab, acoustic guitar, electric guitar cab, vocals, woodwinds, brass.
Features:
- Hand-crafted titanium-sputtered true condenser capsule
- Accurate definition and fast transient response
- Switchable pickup patterns, cardioid, omnidirectional, figure-eight, and hypercardioid
- Innovative close-miking shockmount
- 40 / 80 Hz bass-cut filters and -10 / -20 dB pads
- Available in a matched-pair configuration
Specifications:
Components:
- Capsule: Hand-crafted 1“ true condenser capsule
- Diaphragm: Titanium-sputtered mylar
Power:
- Electrical impedance: 22 Ohms
- Connectivity: 3-pin male XLR connector
- Powering: 48 Volts according to IEC 61938
Sound:
- Polar patterns: Cardioid, Hypercardioid, Omni-directional, Figure-8
- Frequency range: 20 Hz - 20 kHz
- Sensitivity: 25 mV / Pa (-32 dBV)
- Max SPL: 137 / 147 / 157 dBSPL (0/10/20 dB Attenuation pad - 0.5% THD)
- Equivalent noise level: 13 dB(A)
- Signal to noise ratio: 81 dB
- Low-cut filter: 40 / 80 Hz, 6 dB/Oct, switchable
- Attenuation pad: 10 / 20 dB, switchable
Dimensions:
- Mic weight: 290 g (10.23 oz.)
- Mic length: 146 mm (5.75 in.)
- Mic width: 58 mm (2.32 in.)
- Mic diameter: 29 mm (1.10 in.)
All About Your RKDS:
Unboxing of RKDS:
How To Set Up Your RKDS:
How To Set Up a Twitch Stream with Rockville Equipment:
Description:
The RKDS is a multi-purpose mini mic stand. The most popular use of these are for kick drum mic stands, but there are so many other amazing uses for these. They really come in handy for any amp or instrument that has to be on the ground. You can use these to mic up a bass drum, kick drum, snare, guitar amp, or bass amp. (Certain bass players prefer to have a mic). These are also perfect for floor stage mics, as a desk mic, or for use on the dais table at parties and corporate events. Additional uses are for a stand-up bass, or for saxophone players (sitting). There is so many ways these little stands come in handy.
Our stand weighs twice as much as others on the market because these are super-sturdy and solid. The RKDS has a 10.2” Steel Round Base with a rubber pad that eliminates unwanted noises. It has a 21.4" fixed boom arm that provides precise positioning for your mic.
The stand adjusts from 18.7” to 28.7”. This bad-boy Weighs in at 6.6lbs. There is no better stand in its class at this price guaranteed!
And we topped it off with a scratch-resistant powder coated finish so the stand looks beautiful for life!
This uses a standard thread size of 5/8”inch.
Features:
- Rockville Kick Drum/Guitar Amp Mic Stand With Steel Round Base, Fixed Boom and Rubber Pad
- Low profile height adjustable microphone stand for kick drums and guitar amps
- Heavy-duty steel round base with rubber pad provide extreme stability
- Fixed boom arm provides precise positioning
- Scratch-resistant powder coated finish
Specifications:
- Booming length : 21.4" (54.5cm)
- Height adjustment : 18.7"- 28.7" (47.5cm – 73cm)
- Base Diameter : 10.2" (26cm)
- Thread Size : 5/8"
- Weight : 6.6 lbs (3 kgs)
About Rockville Quality Control Procedures:
The Rockville brand stands for Quality, Innovation and Value. All Rockville products go through the most rigorous quality control standards in the industry. Products go through months of extensive testing before they reach your hands. All user functions are tested and all internal components are tested for quality. Rockville makes products that are virtually un-breakable! Rockville is one of the only brands in its class to test every concept model for weeks or months before starting production. Once production begins, Rockville sends product engineers to their factory to quality control every line of production. During production every product is tested and on top of that Rockville goes the extra mile and has their high level product engineers do an additional quality control. They test a certain percentage of all products from the production line a second time to ensure that the quality meets their vigorous standards, and to make sure that there is never a batch of products with even a slight problem. All Rockville products are backed with a hassle free warranty.All About Your RCXFM20E-B:
All About Your RCX Series Cables:
Description:
All Rockville pro audio cables are made with 100% copper which boosts the efficiency of the cable. There is nothing better than 100% copper. Most of the cheaper cables on the market do not use 100% copper, instead they make their cables with CCA (Copper Clad Aluminum). CCA cables do not perform on the level that 100% copper cables perform at. CCA will not conduct signals efficiently. A 12 gauge CCA cable will not even perform as well as a 14 gauge 100% pure copper cable, which will in turn, affect the performance and longevity of your equipment. If you find cables on the market that do not mention the copper content, there is a good chance that they are selling you a cheaper cable that is CCA and not 100% copper. Rockville pays an inspection company to oversee the manufacturing of the product to ensure that we provide a 100% Oxygen Free Copper Cable (OFC). Our OFC cables are less prone to oxidation, and will provide maximum signal transfer.
The other important factor of a cable is the shielding. Most of the good brands on the market have about 85% shielding coverage, so we decided to take our shielding a step further. Rockville cables are shielded with a tight copper mesh, covering 90% of the cable! The high percentage of coverage increases the ability to absorb the Electromagnetic Interference (EMI) and Radio Frequency Interference (RFI) that suppresses signal and degrades the performance of equipment. Rockville Cable's copper shielding provides great flexibility, maintains a durable structural integrity, while decreasing signal interference ensuring enhanced signal clarity with every use.
Features:
- Rockville RCXFM20E-B Black 20 Foot Nickel Plated Female to Male XLR Microphone Cable
- XLR Connectors with Internal Strain Relief for Rugged Reliability
- 100% Copper Conductors for Enhanced Signal Clarity
- 90% OFC Spiral Shield for Effective EMI and RFI Rejection and Flexibility
- Length: 20 Ft
- Color: Black
