Package Includes:
- (1) Kicker 52CVR102 CVR10 COMPVR 10" 750w Subwoofer 2-Ohm DVC Car Audio Sub CVR102
- (1) Rockville RQB10 Single 10" Vented Ported Subwoofer Sub Box Enclosure 1.4 cu ft
- (1) Complete Single Sub Box Enclosure Installation Kit: Speaker Wire, Screws, Spades
Description:
The CompVR 10-Inch Subwoofer is a 2O dual voice coil design, built for easy wiring.
The reengineered CompVR gets earth-shattering bass to you by engineering a stable base and a cool, powerful motor. Powerful magnets and dual high-temp voice coils move a stiff polypropylene cone, while perimeter venting keeps the air moving around the motor. You get strong bass that keeps on bumping day in – day out.
The CompVR Subwoofer works best with a sealed or ported enclosure for its substantial power handling.
Specifications:
- SIZE [in, cm]: 10, 25
- IMPEDANCE [Ohms]: 2 DVC
- Recommended Amplifier Power (watts RMS): 180-375
- Peak Power (watts, per ANSI/CTA-2031-A): 750
- SENSITIVITY [dB 1w/1m]: 83.6
- MOUNTING DEPTH [in, cm]: 5-1/2, 14
- MOUNTING DIAMETER [in, cm]: 9-3/16, 23.3
- MIN SEALED BOX VOL [cu. ft, L]: 0.8, 22.7
- MAX SEALED BOX VOL [cu. ft, L]: 3, 85
- MIN VENTED BOX VOL [cu. ft, L]: 1.25, 35.4
- MAX VENTED BOX VOL [cu. ft, L]: 1.75, 49.6
Features:
- Rockville RQB10 Single 10" Vented Ported Subwoofer Sub Box Enclosure 1.4 cu ft
- Single 10" Side Ported
- Finished with Durable Bed Liner
- 3/4" MDF
- High Quality Spring Loaded Terminal
- Air Space: 1.4 Cubic Feet
- Tuning Freq- 39Hz
- Mounting Depth: 8"
- Height: 11"
- Width: 20"
- Depth: 14"
- Cutout Diameter: 9.185"
Complete Single Subwoofer Enclosure Installation Kit!
Includes:
- 10 Drywall Wood Screws (Wood screws are the type of screws; the screws are actually made of metal)
- 12 Feet of 14 AWG Blue Speaker Wire
- 2 Spade Terminals
This accessory package includes everything you need to install one subwoofer into an enclosure, and wire to connect the enclosure to your amplifier. This package is a top of the line accessory package which we put together and tested.
The drywall wood screws were hand selected by our installation experts because they drill into the enclosure very cleanly, without chipping the enclosure. The speaker wire is 14 gauge. This is way better than using 16 gauge. You can be 100 % sure that your enclosure will have a clean signal to the amplifier with this top of the line speaker wire. These spade terminals have also been hand selected by our installation experts to make the internal wiring simple, secure, and to run the audio signal cleanly.
