Package Includes:

• (2) American DJ 7PZ IP RGBW IP65 Rated Outdoor LED Wireless DMX Par Wash Up-Light
  
• (1) Rockville ROCKFORCE W2 192 Channel Wireless 2.4Ghz DMX Lighting Controller
  
• (1) Rockville RFAAW DJ Event Facade Light Weight Metal Frame Booth+Travel Bag+Scrim
  
• (1) Rockville RVLS1 10' Ft Tripod Lighting Tree Stand w/Side Bars - 110lb Capacity
  
• (1) Rockville R700 Fog/Smoke Machine w/ Remote+Fluid Quick Heatup, Thick Fog
  
• (2) Rockville RDX3M25 25 Foot 3 Pin DMX Lighting Cable 100% OFC Copper Female 2 Male
  

---

What's in the Box of 7PZ IP:

• American DJ 7PZ IP RGBW IP65 Rated Outdoor LED Wireless DMX Par Wash Up-Light
  
• IP65 connection to Edison Cable (1M)

Description:

The 7PZ IP is a heavy duty, metal IP65 outdoor rated 105W LED Par with motorized zoom and ADJ's WiFLY EXR wireless DMX built-in. It features seven 15W quad (4-IN-1 RGBW) LEDs with 64 built-in color macros. There are 5 dimming curves plus smooth 0-100% electronic dimming. With 5 operational modes, 12 DMX channels modes and 4-button menu with function display, the 7PZ IP has a varied of control options. The zoom range is 5 ~ 45-degrees.

A choice of twelve different DMX modes: 4, 5a, 5b, 6, 7a 7b, 8, 9, 10a, 10b, 12 and 13-channel – offer added flexibility. The basic 4 and 5-channel mode are useful in situations where available DMX channels are limited, while the full 13-channel option offers full control over all the fixture’s features including full red, green, blue and white color mixing, master dimmer, strobing and zooming.

Features:

• Compatible with ADJ’s WiFLY Protocol
  
• Strobe (electronic)
  
• 64 built-in Color Macros
  
• 5 Operational Modes: Color Change Mode; Color Fade Mode; Auto (Program Run)
• Mode; Sound Active Mode and DMX-512 Mode
  
• 4-button LED Display on rear panel
  
• Electronic Dimming 0 – 100%
  
• Flicker Free
  
• WiFLY EXR DMX Range: 2,500 feet /700M (line of site)
  
• Wifly On/Off
  
• Dual bracket yoke allows fixture to be hung or set on the ground

Specifications:

• Light Source: 7 x 15 Watt Quad (RGBW) LEDs
  
• LED Life Expectancy: 50,000 Hrs.
  
• Beam Angle: (5 to 45-degrees)
  
• Refresh Rate: 1.8KHz
  
• Power Input: IP65 rated connection
  
• Power Pass through: IP65 rated connection
  
• Data: 3 Seatronic IP connection
  
• With Wired Digital Communication Network
  
• 12 DMX Channel Modes (4, 5a, 5b, 6, 7a 7b, 8, 9, 10a, 10b, 12 and 13-channel)
  
• 16 Selectable WiFLY Address Channels
  
• Input Voltage: 100-240V 50Hz/60Hz (Auto Sensing)
  
• Power draw 120V 60Hz: 128W
  
• Power draw 220V 50Hz: 128W
  
• Dimensions (L x W x H): 10.5” x 13.75” x 15” / 270 x 350 x 380mm
  
• Weight: 25 lbs. / 11 kg.
  
• Metal Black Housing
  
• IP 65

---

All About Your ROCKFORCE W2:

How To Set Up Your ROCKFORCE W2:

Buttons, Faders, & Controls Explained on Your ROCKFORCE W2:

How To Set Up Wireless DMX with your ROCKFORCE W2:

How To Set Up a Scene on Your ROCKFORCE W2:

How To Set Up a Chase on Your ROCKFORCE W2:

Includes:

• Lighting Controller
• Power Cable
• Wireless Transmitter Antenna
• Manual and Warranty Card

Description:

Rockville is proud to introduce the all new ROCKFORCE W2 universal DMX Controller with 192 DMX channels. This controller has a built-in wireless DMX transmitter allowing you to control your lights wirelessly. The way wireless DMX works is that your controller has a transmitter and your light needs to have a receiver. Some lights have the wireless DMX receiver built in. If they don't, we now sell a wireless DMX receiver called the DMX-WRE. This will add a wireless DMX receiver to your light. This DMX controller has the wireless transmitter built in.

Even if you have only one wireless receiver, you can have a setup with this wireless DMX controller and you can connect one receiver to your light, and then daisy chain all your other lights together.

Another option is to have each one of your lights with a wireless receiver and then you literally need no DMX wires. This willactually save you money because our wireless DMX receivers cost less than most DMX cables. (search DMX-WRE).

This controller is easy to use and is designed to work seamlessly with lights from the leading brands such as Chauvet, American DJ and more! Our DMX controller is top quality and includes easy to understand instructions. This controller functions the same as the other leading brand controllers.

With the ROCKFORCE W2 you can control 12 lights with up to 16 channels per light. In addition, there is a 4-bit LED display and built in microphone which can be used to set up automatic modes. A great function we would like to mention is that you can take the program from any light and easily assign it to another light. This added feature provides flexibility and will saves you a ton of time at your next gig!

Although this controller has complex features we were able to design it with users of all experience levels in mind. This controller is so user friendly we gave it to some people who had little to no experience using lighting controllers and they were able to get the hang of it in no time!

We tested this against controllers from the leading and most famous lighting manufacturers and our controller performed as good or better at a fraction of the price! We are so confident in the reliability, build quality, and your satisfaction with this product that we will give you a 90-day money back guarantee. You can use the item and if you don't love it, then we will cover return shipping cost and give you all your money back upon receiving the return.

Features:

• Rockville ROCKFORCE W2 192 Channel Light/Fog DMX Lighting Controller With Built In Wireless DMX Transmitter
• Built in wireless DMX transmitter and antenna
• Model DMX-WRE receiver available in our store is a DMX receiver compatible with this
• This is also compatible with all of our wireless DMX lights
• 12 Scanners of 16 channels each
• 23 Banks of 8 programmable scenes
• 192 DMX channels of control
• 6 Programmable chases of 184 scenes
• 8 Sliders for manual control of channels
• Automatic mode program controlled by speed and fade time sliders Fade time /speed
• Blackout master button
• Reversible DMX channels allows fixture to react opposite to others in a chase
• Manual override allows you to grab any fixture on the fly
• Built-in microphone for music triggering
• DMX polarity selector
• Power failure memory
• 4-bit LED display
• Power Supply: 110-240Vac, 50-60Hz (DC9V-12V)
• Electric Current: No less than 300mA
• Power Consumption: 10W
• Control Signal: DMX512
• Control Channels: 192CH
• Product Dimensions (L x W x H): 19" x 5.24" x 2.76" inches
• Product Weight: 3.75 lbs

Wireless DMX Features:

• Daisy-chain multiple lights using master/slave mode and use one receiver to control all of the connected lights. This setup requires one receiver or if your light has the receiver built in it requires nothing else additional
• Each light can have a receiver built in (or use our DMX-WRE on each light) and each light will have its own channels on the controller so they can all be controlled independently (this can be done with up to 7 lights/groups)
• Makes it easy to set up all of your lights without a mess of wires!
• Controls work without any delay. These are extremely reliable
• The product uses the 2.4GHz frequency band
• Efficient GFSK modulation with 126 channel high-speed frequency hopping (FHSS). Hops 1100 times per second for interference-free operation
• 3-color LED displays status and parameters
• One-touch operation
• 7 selectable groups of lights can be controlled independently
• Connect up to 25 receivers
• Requires you to hold the button to change linking - this prevents accidental un-linking
• System Information - CPU: 32-bitARM Core
• Distance: 1968 feet (600 meters)
• Modulation: GFSK maximum transmit power: 23 dBm
• Receiver Sensitivity: -94 dBm

---

All About RFAAW:

All About Rockville DJ Facades and Accessories:

How To Set Up Your RFAAW | RFAAB:

Each Set Includes:

• (4) Panels each 27.5" W x 47.2" H
• Stretchable White Scrim
• Carry Bag for easy Transport
• 3M Velcro

Description:

The Rockville RFAAW DJ Event Facade is the best in its class! Our Rockville employees have used all the popular Façades on the market and had so many frustrations, so we decided to make our own!

What makes ours way better:

1. Light-weight

Our panels are made out of pure aluminum! Other brands use steel which is not as durable and weighs a lot more. They use this material simply because it is cheaper. We had the option during product development to choose steel or aluminum. The steel would have cost $10 less actually. We went with the aluminum because it is lighter in weight and much stronger.

2. Larger panels

We made each of our panels 27.5" inches wide. We include 4 panels which totals 110" inches. Our competitors panels are too small. Their panels are around 17 - 20 inches wide each panel. That adds up to only 80" inches. You would have to use a pretty small table or buy 2 facades. I am talking from personal experience.

3. Foldable design for quick setup and break-down

Our design folds for easy setup and breakdown! Our competitors advertise that their item can fold and break down easily. I've used them, and you have to literally disconnect the hinges, and then next time you use them again you have to reconnect it. I do not consider it quick or easy. Ours literally just folds and you do not have to disconnect all the hinges. Our model is the only one I have seen on the market that truly folds for quick and easy transport.

4. 360 Degree panel rotation

Our panels can rotate a full 360 degrees, giving you the freedom to wrap these around a table and angle them perfectly to make your setup professional looking. One of the biggest issues that annoyed me the most about the competitor's panels is that they have huge limitations in the angles of their panels. What was most annoying to me was that when you try to angle them how you want, they either got stuck or the hinges popped out and I had to set them up again and again. With the Rockville 360 degree rotating panels you are completely free to angle your panels easily without any limitations!

5. Built-in scrim!

The stretch fabric panels are easily removable for cleaning. Our scrim can be washed by hand in cold water and laid down flat to dry. Our scrim is also a fire retardant.

6. Travel bag included

Transportation and storage is simple with the included carry bag.

7. Non-slip rubber feet for stability

We decided to add rubber non-slip feet to our model. This adds more stability to the façade.

8. Expandable!

We sell models RAPFAW and RAPFAB which are add on panels so you can expand your black or white facade and have an unlimited amount of panels connected together. We also sell separately models RSCFAB and RSCFAW which are black or white scrims. This way you can interchange the color of your scrim depending on the event you are using this for. Another purpose of this is if you want to have one set in the wash you can still have a backup available.

9. Price!

I personally felt like I got ripped off when I paid over $250 for a DJ Event Façade. I did not see any reason for it to cost so much. I got even more upset when I put it together and it did not feel like $250. We decided to go to market with a product twice as good at half the price! We want the best gear to be affordable for everyone!

10. 90 Day Money Back Guarantee including return shipping!

If for any reason you are not 100% satisfied with your purchase we will send you a prepaid shipping label and refund you in full for this item. We know that this will be the best Façade you have ever purchased so it is highly unlikely you will want to return it.

Features:

• Rockville RFAAW DJ Event Facade with White Scrim and Travel Bag
• (4) Panels included - each are 27.5" W x 47.2" H
• Light Weight Aluminum Frames. The entire product weighs 7 LBS, around a third of the weight of our competitors who make their panels out of steel! Also our light-weight aluminum is much stronger than steel
• Includes travel bag for easy transport
• Includes white scrim
• Includes a carrying bag to store and keep facade scrim looking its best
• Folds for easy break down and travel - no need to disconnect the hinges!
• 360 degree rotating panels allows each panel to be positioned to your liking with no limitations
• Detachable hinges
• Includes white scrim made of a special stretch material
• Scrim is fire retardant
• Scrim is easy to wash - simply wash with cold water and lay it flat to dry
• Non-slip rubber feet for stability
• Expandable: Add additional panels sold seperately (models RAPFAW and RAPFAB)
• Additional scrims available in our store in black and white (models RSCFAB and RSCFAW)
• Product Weight: 7 LBS
• Packaged Shipping Weight: 10 LBS

---

Video of RVLS1:

Description:

This classic lighting tree stand allows for a maximum height adjustment to 10 feet and will support up to 8 par can lights. The stand adjusts with easy-to-use friction knobs, and locking pins can be used for added security. The top T-bar holds up to 4 par cans, while the sidemount bars will hold an additional 2 par cans each.

Features

• Adjustable Height
• Steel Construction
• Black Color
• 1 YEAR