XBAR-32

It fits bars from 1.5" to 2" in diameter. The 1.75" and 2" clamps, plus 1.5" and 1.875" rubber pads, cover all four common sizes, so it fits most side-by-sides and golf carts. The clamp bases can go on the top or bottom of the soundbar, so you can mount it above or below the bar.

The included harness connects directly to the battery. Yellow goes to the 12V battery terminal, red to the ignition/accessory line, and black to the battery ground or the metal chassis. The RWK8ATV kit includes 8 gauge OFC power and ground cables, a fuse holder with a 60A fuse, and terminals, so you don't need to buy any extra hardware.

Yes. The RCA left/right outputs connect to a second soundbar, a powered subwoofer, or an external amplifier. The blue remote wire turns on an external amp along with the soundbar, which helps on larger builds that need more bass or coverage for the back seats.

It's IPX6 rated and marine rated, with weather-resistant grills and hardware. That means it holds up to rain, mud spray, and splashing on the trail. The enclosure is also built to handle the constant vibration of off-road riding.

It puts out 600W from a built-in Class D amp through eight forward-firing speakers: four 3.5" mid-bass drivers, two 3.5" mid-range drivers, and two 1" dome tweeters. All the speakers face the riders, so the sound stays loud and clear in the cab instead of spreading behind the vehicle.

Open Bluetooth settings on your phone, choose "X-Bar 32," and you'll hear a confirmation tone once it's connected. Bluetooth 5.0 works up to 32.8 ft and reconnects automatically when you're in range. To use a cable instead, plug into the 3.5mm aux input and press Source (the light turns blue for Bluetooth, green for AUX).

Yes. Press the Rockville logo button to cycle through red, blue, purple, an automatic color-cycle mode, and off. The lights work separately from the audio, so you can switch them off for daytime rides without changing the music.