null
  • 90 Day Hassle Free Returns
  • Free Same Day Shipping
  • Expert Advice
  • Lowest Price Guarantee

Rockville W15K9D4 15" 5000w Car Subwoofer+Sealed Sub Box+Mono Amplifier+Amp Kit

SKU:
W15K9D4+dB14+RWK41+RGS15+K1
$818.98 $364.95
(You save $454.03)
(No reviews yet) Write a Review
Condition:
New
Bundle:
Yes
SHADOWPARENT:
SHADOWS:
KITCOMPONENTS:
dB14, K1, RGS15, RWK41, W15K9D4
ISKIT:
Yes

Warranty Information:

1 YEAR

Out of stock

Enter your email address to be notified when this item is back in stock.

FREE Shipping

Call for Expert Advice
Call now: 1-646-758-0144

Package Includes:

  • (1) Rockville 15" Car Audio Subwoofer
  • (1) Rockville dB14 4000 Watt/2000w RMS Mono Class D 2 Ohm Amplifier Car Audio Amp
  • (1) Rockville RWK41 4 Gauge Complete Car Amp Wiring Installation Wire Kit with RCA's
  • (1) Rockville Single 15" Sealed Car Sub Enclosure Box 2.03 Cu Ft, 3/4" MDF
  • 10 Drywall Wood Screws (Wood screws are the type of screws; the screws are actually made of metal)
  • 12 Feet of 14 AWG Blue Speaker Wire
  • 2 Spade Terminals

Features of W15K9D4:

  • Rockville W15K9D4 K9 Series 15" Dual 4-Ohm Car Subwoofer
  • Peak Power Handling: 5000 Watts
  • Program Power Handling: 2500 Watts   
  • CEA Rated RMS Power Handling: 1250 Watts 
  • 3" 4-Layer Black Aluminum Voice Coils Wound with OFC Wire Made in USA
  • This voice coil is stable up to 240 degrees celcius! The voice coil windings are made in the USA! 
  • Double Stacked 190 Oz High Quality Magnet
  • Cast Aluminum Basket With Black Sanded Finish Makes This Sub Very Efficient And Lighter Weight
  • Two Chrome-Plated Binding Post Terminals
  • Black Non-Pressed Paper Cone With Beautiful Finish
  • Our cones are ultra-stiff. They are thicker and stronger than other subs on the market making our subs able to handle more power.
  • Thick Foam Surround Provides Incredible Sound Quality With Minimal Distortion
  • Red Stitching Cone Reinforcement Ensures Long Life
  • New Ultra-stiff  PolyPropylene (PP) Dustcap
  • Impedance: Dual 4-Ohm Voice Coils
  • Vented Hole on T-yoke Enhances Heat Dissipation
  • Special Custom Rubber Boot Magnet Covers Make the Woofer Look Nice and Protects the Magnet
  • Custom Rockville Mounting Gasket Looks Beautiful and Makes it Easy To Mount the Subwoofer Air-Tight
  • High BL Magnetic Motor Gap
  • We use the highest grade black glue that handles extremely high temperatures which allows our woofer to handle even more power than they are rated
  • Nomex Spider provides tear resistance, strength and long-term reliability over regular cotton and poly cotton spiders
  • Cutout Diameter: 14.09” inches
  • Mounting Depth: 8.23” inches
  • Frequency Response: 32 Hz - 1.5K kHz
  • 10mm T-Yoke + 10mm Washer
  • Sensitivity: 87.9dB
  • Sealed Enclosure Volume: 1.7 – 2.9 Cubic Feet
  • Vented/Ported Enclosure Volume: 2.7 – 3.85 Cubic Feet
  • XMAX is 30mm
  • Weight: 34.17 Lbs.
  • Shipping Weight: 38.58 Lbs.
  • Shipping Box Dimensions: 17.72" x 17.72" x 12.4" Inches
  • XMAX: 30MM

Detailed Info:

  • Body: Non-Pressed Paper
  • Gap Plate Inside Diameter: 95mm (3.74 inches)
  • Gap Plate Outside Diameter: 190mm (7.5 inches)
  • Gap Plate Thickness: 25mm (1 inch)
  • Yoke Outside Diameter: 180mm (7.1 inches)
  • Yoke Thickness: 10mm (0.4 inches)
  • Yoke Pole Diameter: 75mm (3 inches)

TS Parameters:

 SeriesParallel
Fs 32.96 Hz32.96 Hz
Qms8.218.39
Cms0.0745 mm/N0.0745 mm/N
Bl   22.71 N/A11.43 N/A
Zmin   10.88 Ω2.76 Ω
Re  8.10 Ω2.00 Ω
Qes 1.020.99
Mms     312.9712 g312.9712 g
dBspl      85.9786.09
L1kHz       7.47 mH1.85 mH
Sd823.7164 cm²823.7164 cm²
Qts0.910.89
Rms 7.89 Ωm7.73 Ωm
VAS 70.5899 L / 2.49 cu ft70.5899 L / 2.49 cu ft
L10kHz2.87 mH0.71 mH



Video of dB14:


Description:

The dB14 is a class D monoblock high power amplifier with 4,000 watts peak output, 2,000 watts RMS output, and 1000 watts CEA-2006 rated power. All of the mono amplifiers in the dB series are 2 ohm stable. They are all CEA-2006 compliant, which makes it easy to compare this amplifier to other CEA compliant amps on the market. Here at Rockville we offer the best value in car audio. We therefore want to make it easy for you to compare our products to any brands on the market. So we provided 3 ratings for all of our car amplifiers. We provided a CEA compliant rating, which you should use to compare this amplifier to other premium brands that make CEA compliant products such as Kicker, Rockford Fosgate, Kenwood, Pioneer, etc. We also supplied an RMS rating that is not CEA compliant, but has become standard in the industry. You should use this rating when comparing with ratings from brands such as Hifonics, Earthquake, DB Drive, etc. Lastly, we also supply a peak rating which almost all brands in the industry provide. This peak power is the amount of power the amp puts out at the loudest moments during a particular song.

One of the tricks to determine the real power of a car amplifier is to multiply the fuse rating by 10 to determine the true RMS power. This formula almost always works within 20 %. The dB14 features a Maxi fuse with a rating of 100 Amps. Although we rate these conservatively at 1000 watts CEA @ 2 ohms, this amplifier puts out more power than this!

This amp has a fully adjustable 12dB/Octave crossover with differential circuitry. Other features include a subsonic filter, a fully adjustable bass equalizer, mute and delay soft start technology, a phase control switch, and a dashboard subwoofer control for added convenience. The dB14 is protected by a full IC controlled circuit and has professional peak limiter circuitry guaranteeing distortion free music playback at all levels.

The RCA input accepts both balanced and un-balanced inputs. If there is potential inference in the car, the balanced input signal is less susceptible to noise.

The dB amps by Rockville use the top parts and components recommended by Rockville’s very own engineer. These amps are the best sounding out of any series we have ever created. They perform more efficiently resulting in even dB of sound. We created them to be 2 ohm stable just like the world’s most famous amps by Rockford Fosgate, Kicker, etc. If you compare our amp to the most famous amps you will find our amp can compete and, in my opinion, surpass the performance of anything in its class.

Each and every amplifier we manufacture is tested twice. Once at the semi-finished PCB stage of production, and then another test is done at the final assembly. We also run age tests on them. After this is all done, we hire a 3rd party independent company unaffiliated with our factory or with us to go to the factory and inspect 20% of all the production items. We test the power, the controls, and over 20 other tests. We guarantee these amps will satisfy you. We are so confident in your satisfaction of this amplifier that we will offer you a 90 day money back guarantee. If this amp does not perform as well as you expected we will send you a pre-paid shipping label and give you all of your money back. This means if for any reason you want to return the amplifier back for a full refund within 90 days, you can! (Amp must be complete along with the box).

Includes:

  • Amplifier
  • Bass Remote
  • Birth sheet with tested power
  • Owner’s manual
  • Mounting Screws
  • Warranty

Features:

  • Rockville dB14 4000 Watt/2000 Watt RMS Mono Class D 2 Ohm Car Amplifier With Optical Coupler Technology
  • CEA Compliant Power Ratings (Rated at less than 1 % distortion) (Use these CEA ratings when matching and comparing with other CEA compliant brands such as Kicker, Rockford Fosgate, etc.)
    - 2 Ohm: 1000 Watts x 1 Channel <1% THD+N
    - 4 Ohm: 600 Watts x 1 Channel <1% THD+N
  • RMS Power Ratings: (Use these RMS ratings when comparing with great brands such as Hifonics, Earthquake, Soundstream, etc.)
    - 2 Ohm: 2000 Watts x 1 Channel
    - 4 Ohm: 1200 Watts x 1 Channel
  • Peak: (The amount of power the amplifier can produce for a split second at the loudest part of a song
    - 2 Ohm: 4000 Watts x 1 Channel
    - 4 Ohm: 2400 Watts x 1 Channel
  • High-Speed MOSFET Power Supply
  • Optical Coupler Class “D” Technology
  • Fully Adjustable 12dB / Octave Crossover with Differential Circuitry
  • Low Pass Filter: 50Hz - 250Hz
  • Subsonic Filter: 15Hz - 55Hz
  • Phase Control Switch
  • Full IC-Controlled Protection Circuitry
  • Remote Dashboard Subwoofer Control
  • Fully Adjustable 12dB Bass Equalizer
  • Mute and Delay Soft Start System
  • RCA Preamp Line Output
  • 8 Volt Preamp Circuitry
  • Status Mode LED Indicator
  • Minimum THD at Rated Power: <0.1%
  • S / N Ratio: >90dB
  • Under Voltage Protection at 10V
  • Over Voltage Protection at 16V
  • Frequency Response: 15Hz - 250Hz
  • Damping Factor: >150 @ 100Hz
  • 100 Amp Maxi Fuse
  • Dimensions: (W x H x L) 9" x 2.4" x 15.5"

Owner's Manual


Video of RWK41:


Unboxing Video for RWK41:

Description:

The Rockville RWK41 4 AWG (American Wire Gauge) amp kit has the following differences over other amp kits on the market at this price point.

1. Our RCA cables are 100 % copper. These are top of the line RCA cables

2. Better Resistance: The only thing that really matters with wires is the resistance rating. This is a measurement of conductivity and how much signal is loss per foot of wire. Since Rockville wires are made with around 3 times as much copper as any other wire at this price point, these wires had a much better resistance rating which means they will transfer more power to your amps than the other brands.

3. We do not cheat you on the thickness of the wire. These are standard American wire gauge thickness. This is another reason our conductivity is better than anything else at this price point. Other brands in the market place write 4 gauge, but cheat you on the thickness. We are honest about the thickness.

4. The Rockville amplifier installation kits feature a new soft abrasion proof insulating jacket. This rugged PVC outer jacket allows for 100% improved flexibility over standard power cables making them extremely easy to route through your vehicles interior, and it maintains exceptional resistance to grease and oil. The PVC outer jacket can with-stand an extreme temperature range of -40 to 220 degrees F.

The RCA signal transfer cables included in this kit feature blue and silver twisted pair technology in a clear outer jacket insulation skin. Not only do the blue and silver wires look cool but they also provide superior signal transfer with maximum noise suppression. They are 100% copper to provide absolute lossless perfect signal transfer to your receiver. This technology reduces interference, so your audio signal flows clean and pure at all power levels.

This kit also includes a massive 60 Amp AGU Gold Plated Fuse, so you can be sure it will handle the all the DC power that your amp will need without even the slightest loss of current. The included 7 split loom tube provides protection for your power cable from the typically harsh environment found under the hood of your car.

Audiosavings product experts have tested this amp kit against many leading amp kits on the market and were were impressed not only by the great looks but by the quality of these Rockville installation kits as well. These kits had a lower resistance rating than the other brands we compared and tested them against. What this means is that Rockville manufactures their kits with more copper than other kits at this price point, ultimately providing your amplifiers with better and cleaner DC power, so they work cooler and more efficiently. You will hear the difference a Rockville installation kit will make!

Features:

  • 1 – 17’ High Grade Twisted Pair of 100% Copper RCA Cable
  • 17’ – 4 Gauge Translucent Blue SuperFlex Power Cables
  • 17’ – 18 Gauge Blue Remote Cable
  • 17’ – 16 Gauge Clear Speaker Wire
  • 3’ – 4 Gauge Clear SuperFlex Ground Wire
  • Gold Plated AGU Heat Resistant Fuse Holder
  • 60 Amp AGU Gold Plated Fuse
  • 7’ Split Tube Loom
  • Accessories Included: Wire Ties, Ring Terminals, Butt Connectors, Spades, and Grommets
Description:

The RGS15 is a single sealed 15" speaker box is made in the USA with Grade “A” ¾” MDF wood. This enclosure is made with precision cutting machinery by industry experts that have been making these enclosures in the USA for over 20 years. All Rockville enclosures come with a customized enhanced glue that is unmatched by any other manufacturer. That means that the carpet will stay in place and not rip or tear. The ¾” USA MDF is much stronger then any type of import wood.  This will keep your box performing at an optimal level by not flexing and distorting your woofers. Your woofers will thank you!  EVERY Rockville enclosure is not only glued at all joints but stapled as well. If that wasn’t enough we add a layer of silicon to every seam! This makes your Rockville enclosure rock even more! 

MADE IN THE USA WITH PRIDE!

Features:

  • Rockville RGS15 Single 15" Sealed Subwoofer Enclosure
  • Proudly Made In The USA, Using Only The Finest Quality Materials - For The Best Level of Performance From Your Subs!
  • 3/4" USA Heavy Duty MDF Construction
  • Machine precision cut mounting holes
  • Top of the line Glue for extra durable adhesion
  • High quality GOLD spring loaded terminals
  • Designed, tested, and engineered to work with most of today’s popular woofers. These enclosures are built with the quality additives needed to maximize the performance of any sound system.

Enclosure Measurements:

  • Type of Enclosure: Sealed
  • Enclosure Sub Size: Single 15"
  • Dimensions in Inches: 16" L x 18" W x 16.25H"
  • Top and Bottom Depth: 17"
  • Mounting Depth: up to 14.5" (enough depth for any sub on the market)
  • Gross Volume Per Sub (Measurement for the outer dimensions of the box): 2.70 Cubic Feet
  • Net Volume Per Sub (Measurement for the outer dimensions of the box less the thickness of the wood): 2.03 Cubic Feet

Complete Single Subwoofer Enclosure Installation Kit!

Includes:

  • 10 Drywall Wood Screws (Wood screws are the type of screws; the screws are actually made of metal)
  • 12 Feet of 14 AWG Blue Speaker Wire
  • 2 Spade Terminals

This accessory package includes everything you need to install one subwoofer into an enclosure, and wire to connect the enclosure to your amplifier.  This package is a top of the line accessory package which we put together and tested. 

The drywall wood screws were hand selected by our installation experts because they drill into the enclosure very cleanly, without chipping the enclosure.  The speaker wire is 14 gauge.  This is way better than using 16 gauge.  You can be 100 % sure that your enclosure will have a clean signal to the amplifier with this top of the line speaker wire.  These spade terminals have also been hand selected by our installation experts to make the internal wiring simple, secure, and to run the audio signal cleanly.

1 YEAR
  • UPC:
  • 613816455768

Free shipping to the 48 continental USA only. Orders placed by 1:00 EST will ship same day.
Back to links