- (1) KRK V6S4-NA V-Series 6" Powered Reference Studio Monitor Active Speaker
- (1) Rockville RCM03 Pro Studio Recording Condenser Microphone Mic+Metal Shock Mount
- (1) Rockville ROCKSHIELD 3 Large Studio Mic Isolation Shield with Sound Dampening Foam
- (1) Audio Technica ATH-M30X Professional Studio Monitor Collapsible Headphones
Authorized KRK Dealer!
Description of V6S4-NA:
KRK Systems V Series 6 nearfield studio monitors are specifically designed for audio production applications where accurate reproduction is critical. KRK worked with hundreds of pro engineers/producers/mixers to develop these groundbreaking monitors. Recording and broadcast studios as well as sound design and audio production houses will benefit from adding the V Series 4 as the go to monitor of choice.
V-Series 6 includes 49 user selectable EQ settings to ensure proper setup for room acoustics and placement anomalies as well as taste and individual preference. The KRK design team has painstakingly modeled and analyzed hundreds of monitor placement and room acoustic situations to ensure that KRK delivers the most useful tools with minimal adjustments.
Features:
- KRK V6S4-NA V-Series 6" Powered Reference Studio Monitor Active Speaker
- KRK custom designed Kevlar tweeter
- KRK custom designed Woven Kevlar woofer
- Optimized front ported bass reflex enclosure design
- Bi-amped Class-D amplification
- Acoustic and desk loading condition correction Low Frequency EQ's
- Mid and High Frequency EQ's
- Precise input level attenuation switch
- Standby, ground lift, input sensitivity, and logo LED selectors
- Optional protective grille included for mobile broadcast applications
- Friction lock, Neutrik combo (XLR and TRS) connector
- Robust EVA foam pad for non-skid and acoustic isolation
- Universal threaded mounting bracket points
Specifications:
- Configuration:2-Way
- System type:Active Studio Monitor
- Low-Frequency:Woofer, 6.5" cast aluminum frame, Kevlar cone, ferrite magnet
- High-Frequency:Tweeter, 1", Kevlar dome, ferrite magnet
- Frequency Response:49Hz - 19kHz
- Frequency Range:40Hz - 24kHz
- Max Peak SPL:115 dBSPL
- Power Output:LF (125 Watts), HF (30 Watts), Total (155 Watts)
- High Control:H1 (High Shelf -2dB 10kHz, H2 (High Shelf -1dB 10kHz / High Mid Peq -1dB 3.5kHz), H3 (High Mid Peq -1dB 3.5kHz), H4 (Flat), H5 (High Mid Peq +1dB 3.5kHz), H6 (High Shelf +1dB 10kHz / High Mid Peq +1dB 3.5kHz, H7 (High Shelf +2dB 10kHz)
- Low Control:L1 (Low Shelf -3dB 60Hz), L2 (Low Shelf -1.5dB 60Hz), L3 (Low Shelf -2dB 60Hz / Low Mid Peq -2dB 200Hz), L4 (Flat), L5 (Low Mid Peq -2dB 200Hz), L6 (Low Shelf +1.5dB 60Hz), L7 (Low Shelf +3dB 60Hz)
- Enclosure Construction:MDF / Aluminum
- Grille:Included
- Dimensions (H x W x D): 13.89" (353mm) x 9.09" (231mm) x 11.34" (288mm)
- Weight:20.72Lbs. (9.4 Kg.)
How to Setup a Rockville Condenser Microphone with Your Computer:
Video of RCM03:
Unboxing Video of RCM03:
The
Rockville RCM03 condenser microphone performs better than famous branded
microphones that cost over $150. This model is similar to our RCM01
however it is made of aluminum, and the frame is slightly larger. We
also upgraded this model to a high end metal anti-wind cap! We highly
recommend this design. This model is an amazing upgrade to our top
selling RCM01 model!
Multi-Purpose
Designed for crystal clear capturing of vocals, acoustic and amplified
instruments, as well as room reverb. The frequency pick up pattern makes
the RCM03 amazing in studio applications.
The aluminum construction makes the RCM03 tough enough for
Live sound applications as well!
Multiple connection options!
This microphone can be used in multiple ways. You can connect this to
the phantom power of your mixer or you can connect it directly to your
computer sound card. We include both cables! We include a cable to
connect it to your mixer as well as a cable to connect the mic to your
computer!
Quality built inside and out!
The microphone is made of aluminum. It is very rugged and tough like you
would expect from any Rockville product. This microphone has a large
diaphragm which is what enables our mic to deliver a wider range of high
and low frequencies than our competitors. Our frequency range is tested
at 30HZ – 20KHZ! The mic sounds crystal clear sound with no
distortion!
The PCB (circuit board) uses surface mounted components which is the
same method the expensive brands use. We use only top components that
under-go extreme testing by our own audio engineers.
The last thing that I need to mention and call out is that our product
is very sturdy. Let me explain. When you are recording, you do not want
even the slightest noises coming from your mic. The microphone consists
of a casing and there is a cartridge inside the case. You do not want
that cartridge moving around. We made sure to adjust our mechanism and
ensure the cartridge is firmly in place and not creating any unwanted
noises.
Best Value
After testing our Rockville condenser mics against mics that cost 300%
more money, we found ours to be as good or better than the ones we
tested against.
What's
Included:
- RCM03
Condenser Microphone (made of aluminum!)
- 100% Copper 10 foot 3.5mm jack to XLR cable to connect mic to your computer or other device we need to update on ebay amazon, website, etc
- 100%
Copper 10 foot XLR to XLR cable to connect to any mixer with phantom
power
- Metal
shock mount
- Metal
Anti-wind foam cap
- Owners
Manual
- Warranty
card
Features:
- Rockville RCM03 Pro Studio
Recording Condenser Microphone Mic+Metal Shock Mount
- Aluminum high quality construction
- Polar Pattern: Internally Polarized
Condenser Cardioid Design
- Large diaphragm for smooth, natural
sound and low noise
- Power Requirements: 48V DC Phantom Power
- Uni-directional
- Sensitivity: -27dB±2dB(0dB=1V/Pa
at1kHZ)
- Output impedance: 200Ω±30%(at 1kHz)
- Standard operating voltage: 3V
- Operating voltage range: 1.5V-10V
- Current consumption: less than
500ūA
- Voltage deduction characteristic:
within 3dB at 2V
- S/N ratio: More than 24dB
- Frequency Response: 30Hz - 20 KHz
- Fixed Crossover Filter cutoff
frequency: 40Hz---16 KHz
- Load impedance: Greater or = to
1000 Ohms
- Equivalent Noise level: Less than
18dB A (IEC581-5)
- Max. Input SPL: 126dB(THD≤1.0% at
1kHZ)
- Electrical current: Greater than
4.8Ma
- Microphone body net weight:320
Grams (0.7 Pounds)
- Microphone Max.diameter 44mm (1.73”
inches)
- Microphone Length 217mm (8.54”
inches)
- Microphone material: steel grille +
Alluminum (handheld part)
- PCB Layout: Surface mount
How to Set Up Your RockShield 3:
Video of ROCKSHIELD 3:
Includes:
- 5 Panel Mic Isolation Shield
- Hardware to Mount unit to your mic stand
- 5/8” Mic Adapter
- Desktop mic attachment
RockShield 3
Rockville’s Rockshield 3 studio microphone isolation shield is the latest addition to our ever growing line of Pro Audio studio accessories. Featuring 2-inch-thick high density acoustic foam, the RockShield 3 keeps unwanted outside audio waves and vibrations from affecting your recordings. By creating an acoustic boundary around the microphone, vocal audio flow is improved. Your voice is redirected to the microphone, meanwhile room reflections are prevented from directly entering the recording area. The end result is you will achieve a crisper and cleaner sound. This shield can be mounted to compatible microphone stands or used in a fixed location, like a countertop/tabletop. Easy installation and studio quality performance will quickly make the Rockshield 3 your go-to sound dampening isolation shield.
Features:
- RockShield 3 Pro Audio Acoustic Microphone Isolation Shield
- Keeps Excessive Room Ambience and Off Axis Sound from interfering with your microphone when recording acoustic and vocal tracks
- Isolates Directional Microphones from Off Axis Coloration
- Limits External Bleed from Unintended Sound Sources
- Features a 2-Inch-Thick High Density Pyramid Acoustic Foam front and a vented metal back plate for the Best Noise Reflection Reduction
- Can be used in fixed location
- Stand mountable
- Provides Vocal Booth Style Recordings with Minimal Footprint
- Professional Studio-Grade
- Rugged Finish Makes This Easy to Transport
- Tri-Pod Foot Design for Stability on Flat Surfaces
- 3/8 Die-Cast Metal Threads
- Mic Stand with 5/8 Adapter
- The shield is made of pure high-grade steel
- Number of Panels: 5 pcs
- Dimensions Each Panel: 6.3'' x 12.2'' inch
- Dimensions Assembled Unit: 17.5'' x 16.1'' x 7'' inch
Description of ATH-M30X:
The M-Series ATH-M30x professional monitor headphones combine modern engineering and high-quality materials to deliver a comfortable listening experience, with enhanced audio clarity and sound isolation. Tuned for highly detailed audio, with strong mid-range definition, these versatile monitoring headphones are ideal in a variety of situations. Designed primarily for studio tracking and mixing, they offer added features for increased portability, making them a great choice for field recording.
More About the M-Series Headphones
Critically acclaimed M-Series professional monitor headphones deliver accurate audio and outstanding comfort, perfect for long sessions in the studio and on the go. Contoured earcups seal tight for excellent sound isolation, with minimal bleed. And the pro-grade materials are durable, yet comfortable. Find out why online reviewers, top audio engineers, and cult followers agree, M-Series is an unmatched combination of audio and build-quality that gets the job done. Hour after hour, year after year.
Features:
- Audio Technica ATH-M30X Professional Studio Monitor Collapsible Headphones
- Advanced build quality and engineering
- 40 mm drivers with rare earth magnets and copper-clad aluminum wire voice coils
- Tuned for enhanced detail, with excellent mid-range definition
- Circumaural design contours around the ears for excellent sound isolation in loud environments
- Convenient single-side cable exit
- Collapsible for space-saving portability
- Designed to excel for studio tracking, mixing and field recording
- Type: Closed-back dynamic
- Driver Diameter: 40 mm
- Magnet: Neodymium
- Voice Coil: Copper-clad aluminum wire
- Frequency Response: 15 - 22,000 Hz
- Maximum Input Power: 1,300 mW at 1 kHz
- Sensitivity: 96 dB
- Impedance: 47 ohms
- Weight: 220 g (7.8 oz), without cable and connector
- Cable: 3.0 m (9.8'), straight, left-side exit
- Accessories Included: Protective carrying pouch, 6.3 mm (1/4“) screw-on adapter
- UPC:
- 613815974369