Package Includes:

• (1) Bose Sub1 Powered Subwoofer Active Sub Bass Module For L1 Pro32 Line Array
  
• (1) Bose Sub1 Roller Bag Soft Padded Case w/Built in Wheels+Telescoping Handle
  
• (1) Rockville RWM1203VH VHF Wireless Dual HandHeld Microphone System/Digital Display
  

---

Description:

A powered, portable bass module, the Sub1 subwoofer combines with virtually any portable PA and delivers low-end performance down to 40 Hz. Its unique 7" × 13" high excursion RaceTrack driver allows for an ultraslim enclosure, delivering performance that rivals a traditional 12" woofer without the cumbersome size, freeing up room in your vehicle and on the stage. Compared to the Sub2 subwoofer, Sub1 is the more compact subwoofer option for the Bose L1 Pro32 system, combining seamlessly via single-cable SubMatch connectivity.You can stack multiple Sub1 subwoofers for even more low end — or to unleash Cardioid Mode for directional bass. With a Sub1, you get a subwoofer that goes virtually anywhere and effortlessly fills out your sound.

Features:

• Add powerful bass to your portable PA system with low-end range down to 40 Hz
  
• Go from vehicle to venue easily with a slim design featuring a unique 7" × 13" high-excursion RaceTrack driver; performance that rivals a conventional 12" woofer with a smaller footprint
  
• Stack multiple Sub1 subwoofers for even more bass or unleash Cardioid Mode for focused, directional performance that steers the bass out front and decreases feedback
  
• Combine seamlessly with Bose L1 Pro32 portable line array via proprietary SubMatch connectivity, which delivers both power and audio over a single cable
  
• Pair with other powered loudspeakers via line input and output with selectable crossover modes, plus integrated threaded pole mount for use with Bose S1 Pro PA and more
  

Specifications:

• System Type: Self-powered bass module
  
• Frequency Response (–3 dB): 40 Hz to 180 Hz
  
• Frequency Range (–10 dB): 32 Hz to 250 Hz
  
• Nominal Vertical Coverage Pattern: 0°
  
• Nominal Horizontal Coverage Pattern: Omnidirectional (with –10 dB rear rejection in Cardioid mode)
  
• Calculated Maximum SPL @ 1 m, continuous: 118.6 dB
  
• Calculated Maximum SPL @ 1 m, peak: 124.6 dB
  
• Crossover: 200 Hz
  

Transducers

• Low Frequency: 1 × RaceTrack low-frequency driver 7" × 13"
  
• Low Frequency Voice Coil Size: 2"
  
• Driver Protection: Dynamic limiting
  

Amplification

• Type: Class D
  
• Low Frequency Amplifier Channel: 480 W
  
• Cooling: Convection cooling
  

Onboard Mixer

• Channels: Two
  
• Channel 1 & 2 Input: Audio Type: Combination XLR or 1/4" TRS connector (mic/instrument/line)
  
• Channel 1 & 2 Input: Impedance: 100 KΩ
  
• Channel 1 & 2 Input: Channel Gain: +10 dB to +45 dB; from input to driver, controlled by volume control
  
• Channel 1 & 2 Input: Max Input Signal: +24 dBu
  
• Channel 1 & 2 Output: Audio Type: XLR connector, line-level, full-frequency bandwidth
  
• SubMatch Input: Audio Type: Bose proprietary multi-pin cable
  
• SubMatch Thruput: Audio Type: Bose proprietary multi-pin cable
  
• LED Indicators: Standby, Phase/Pattern selection, Input EQ selection, Output EQ selection, Signal/Clip Indicator
  

AC Power

• AC Power Input: 100–240 VAC (±20%, 50/60 Hz)
  
• Input: Electrical Type: IEC, SubMatch
  
• Initial turn on inrush current: 14.9 A at 120 V; 29.3 A at 230 V
  
• Inrush current after AC mains interruption of 5: 5.8 A at 120 V; 32.0 A at 230 V
  

Enclosure

• Color: Black
  
• Enclosures Material: High-impact polypropylene, birch plywood
  
• Grille Material: Powder-coated perforated steel
  
• Product Dimensions (H × W × D): 533 × 260 × 529 mm (21.0 × 10.2 × 20.8 in)
  
• Shipping Dimensions (H × W × D): 620 × 620 × 330 mm (24.41 × 24.41 × 12.99 in)
  
• Net Weight: 15.5 kg (34.1 lbs)
  
• Shipping Weight: 18.0 kg (39.6 lbs)
  
• Warranty Period: 2 years
  
• Included Accessories: IEC power cord, slip cover
  
• Optional Accessories: Sub1 Roller Bag, Adjustable Speaker Pole, SubMatch Cable
  

Product Part Numbers

• 840918-1100: SUB1 POWERED BASS MODULE,120V,US
  
• 840918-2100: SUB1 POWERED BASS MODULE,230V,EU
  
• 840918-3100: SUB1 POWERED BASS MODULE,100V,JP
  
• 840918-4100: SUB1 POWERED BASS MODULE,230V,UK
  
• 840918-5100: SUB1 POWERED BASS MODULE,230V,AU
  
• 840918-5130: SUB1 POWERED BASS MODULE,230V,INDIA
  
• 856985-0110: PREMIUM ROLLER BAG,SUB1,BLACK
  
• 857172-0110: SUBMATCH CABLE,BLACK
  
• 857000-0110: SPEAKER STAND,SUB POLE,BLACK
  

Connections and Controls:

• Standby Button:
  Press the button to power on the Sub. The LED will illuminate white while the Sub is on.
  
• Line Inputs:
  Analog input for connecting an L1 Pro or other line-level audio source. Compatible with XLR, TRS balanced, and TS unbalanced cables.
  
• Line Outputs:
  Use an XLR cable to connect the line-level output to a loudspeaker.
  
• SubMatch Thruput:
  Connect an additional Sub bass module with a SubMatch cable. Up to two Sub1 or Sub2 powered bass modules can be powered by a single L1 Pro32 via Sub Match connection.
  
• Power Input Cover:
  Prevents simultaneous use of the SubMatch Input and Power Input. Slide the cover to reveal the power input that is needed for setup.
  
• SubMatch Input:
  Connect the Sub to an L1 Pro32 with a SubMatch cable.
  
• Power Input:
  IEC power cord connection.
  
• USB Port:
  USB-C connector for Bose service use and firmware updates. Note: This port is not compatible with Thunderbolt 3 cables.
  
• Line Output EQ:
  Select between FULL bandwidth or a multi-purpose HPF when using Line Outputs. Press the button to switch EQ settings. The corresponding LED will illuminate white while selected.
  
• Line Input EQ:
  Select between an optimized EQ for an L1 Pro or a multipurpose LPF when using Line Inputs. Press the button to switch EQ settings.The corresponding LED will illuminate white while selected.
  
• Signal/Clip Indicator: 
  The LED will illuminate green when a signal is present and will illuminate red when the signal is clipping or the Sub is entering limiting. Reduce the level or signal volume to prevent signal clipping or limiting.
  
• Level Control:
  Adjust the level of audio output. The Level Control does not affect the Line Outputs. The 12 o’clock position is recommended when in use with an L1 Pro32.
  
• Phase/Pattern Button:
  Adjust the polarity of the Sub. Press the button to switch polarity. The corresponding LED will illuminate white while selected. Also allows access to Cardioid mode when using two identical Sub modules.

---

Description:

Easily transport and store your Bose Sub1 powered bass module with the Sub1 Roller Bag. This soft, padded bag has a molded EVA shell and was designed specifically for Sub1, so you can have confidence your subwoofer will be protected when you’re on the move. The built-in wheels and telescoping handle allow you to roll in, set up, and get into your music in no time.

Features:

• Designed for Bose Sub1 powered bass module
  
• Molded EVA shell, padded lining, and heavy-duty zipper
  
• Includes built-in wheels and telescoping handle
  
• Durable, lightweight design makes your Sub1 even more portable
  
• Available in black

---

HOW TO SET UP YOUR RWM1203VH:

Video of RWM1203VH:

Includes:

• 2 wireless handheld microphones
• 1 receiver unit
• User manual
• Batteries
• Transfer Cable

Features:

• Rockville RWM1203VH VHF Dual Channel Handheld Wireless Microphone System
• Large display on receiver + digital display on each mic
• Each mic is large and solid with a nice weighted feel
• Improved high performance wireless handheld microphone capsule
• Includes transmitter with two handheld, high sensitivity, unidirectional, wireless cardioid microphones
• Featuring a dual filter design to limit feedback and interference
• Ultra signal stability eliminates unwanted distortion
• Transmitter automatically links to receiver for ease of use
• Use two handheld mics at once
• Individual microphone volume controls
• Low power consumption for longer battery life
• System comes in 4 different frequency options. You can request a specific one in the notes
A. 255.1/227.1 MHZ
B. 224.9/256.9 MHZ
C. 228.9/253.4 MHZ
D. 230.8/255.8 MHZ

Specifications:

System:

• Operating Range: 150 feet or more
• Channel: Two Channel
• Frequency Range: 210MHz - 270MHz
• Frequency Response: 40Hz-18KHz
• S/N.:>103dB (1KHz-A)
• Operating Temp: 14°F – 122°F
• Oscillation Mode: Quartz Crystal
• Frequency Stability: ±0.005%
• Modulation Mode: VHF
• Harmonic Radiation :< 63dBm
• RF Output Power: 10mW
• Power Voltage: AC110V- 60Hz
• Mic Battery: AA x 2

Receiver:

• Sensitivity: (S/N=30dB) >2mV
• Audio Output Impedance: 600O
• Audio Output Level.: 0-0.5V
• Power Supply: AC110V 60Hz
• Current Consumption: =50mA
• Audio Out Connector: 1/4" unbalanced

Transmitter:

• Frequency Stability: ±0.005%
• RF Output Power: =10mW
• Modulation Mode: VHF
• Maximum Deviation Range: ±50KHz
• Microphone Mode: Fixed
• Power Supply: AA/1.5V×2
• Current Consumption: =35mA

Owner’s Manual

---