- (1) Rockville ROCK-U MINI 2x2 USB Computer Recording Interface 24 Bit 192Khz Home Studio
- (1) Rockville RCM03 Pro Studio Recording Condenser Microphone Mic+Metal Shock Mount
- (1) Rockville PRO-M50 Studio Headphones w/ Detachable Coil Cable, Case+Extra Ear Pad
- (1) Rockville RDTS Adjustable Height Studio Desktop Tripod Microphone Stand+Mic Clip
Video of ROCK-U Mini:
How to Set Up your ROCK-U Mini:
Description:
The ROCK-U 2x2 is the ideal solution for those who need a low-latency, compact and reliable 2 in / 2 out computer USB audio interface. It is bus-powered and doesn't require any external adapters or power sources : simply connect it to your computer using the provided USB cable and you're all set.
The ROCK-U 2x2 has 2 channels.
Channel 1 features an XLR/1/4” combo jack with phantom power.
Channel 2 features a dedicated 1/4” instrument input.
Additionally, the PAD switch on CH1 allows you to properly gain stage your input source and have a clear signal with a lot of headroom. The signal/clipping indicator lets you monitor your signal in real-time and keep an eye on the sensitivity of your inputs in order to avoid distortion.
Our low noise studio-grade preamps offer clean and clear signal with good signal-to-noise ratio and lots of headroom. Whether you're plugging in a microphone, guitar, bass or synth, the preamps will accurately capture the source with no added artifacts. The 24 Bit / 192 kHz sample rate lets you achieve the highest digital resolution when recording.
The direct/usb monitoring switch lets you choose if you want to monitor your input signal in real-time with 0ms latency. 2 x 1/4” TRS outputs with dedicated volume control provide connectivity to your favorite studio monitors. There is an extra 1/4” headphone out with separate volume control, for monitoring with studio headphones.
Finally, the high-quality metal casing ensures long-term durability for this convenient, compact and portable interface.
Features:
- Rockville ROCK-U 2X2 USB Computer Recording Interface
- 24 Bit 192Khz sampling rate
- 2 Inputs and 2 Outputs
- Ch 1: XLR/1/4” Line/Mic input Combo Jack
- CH 2: ¼” TRS input with Hi-Z switch for connecting guitar, bass etc
- Studio-grade mic preamps with low noise and lots of headroom
- 48v phantom power for use with condenser mics
- Bus powered lets you record on the go (Can get power through the USB of your computer or laptop or power bank)
- USB 2.0 high speed
- Dedicated 1/4” TRS outputs for connecting studio monitors
- ¼” headphone output
- Flexible routing options for mixing and assigning input streams to outputs
- Frequency Response: 20-20KHz\
- Thick metal housing
- Signal and clipping indicator lights
- Ability to monitor direct signal in real-time (with 0ms latency) or USB playback
- Playback/USB button
- Perfect for home studios, recording on the go, or recording a live show
- Very versatile with low latency
- Can record dynamic/condenser mics, instruments, and line level signals
- Independent volume control for channel 1 and channel 2
- Main mix volume control
- Headphone volume control
- Compatible with all Windows and MAC computers and laptops
- Weight: 0.9 Lbs
- Dimensions: 3.1” L x 4.5” W x 1.8” H (Inches)
How to Setup a Rockville Condenser Microphone with Your Computer:
Video of RCM03:
Unboxing Video of RCM03:
Description:
The Rockville RCM03 condenser microphone performs better than famous branded microphones that cost over $150. This model is similar to our RCM01 however it is made of aluminum, and the frame is slightly larger. We also upgraded this model to a high end metal anti-wind cap! We highly recommend this design. This model is an amazing upgrade to our top selling RCM01 model!
Multi-Purpose
Designed for crystal clear capturing of vocals, acoustic and amplified instruments, as well as room reverb. The frequency pick up pattern makes the RCM03 amazing in studio applications.
The aluminum construction makes the RCM03 tough enough for Live sound applications as well!
Multiple connection options!
This microphone can be used in multiple ways. You can connect this to the phantom power of your mixer or you can connect it directly to your computer sound card. We include both cables! We include a cable to connect it to your mixer as well as a cable to connect the mic to your computer!
Quality built inside and out!
The microphone is made of aluminum. It is very rugged and tough like you would expect from any Rockville product. This microphone has a large diaphragm which is what enables our mic to deliver a wider range of high and low frequencies than our competitors. Our frequency range is tested at 30HZ – 20KHZ! The mic sounds crystal clear sound with no distortion!
The PCB (circuit board) uses surface mounted components which is the same method the expensive brands use. We use only top components that under-go extreme testing by our own audio engineers.
The last thing that I need to mention and call out is that our product is very sturdy. Let me explain. When you are recording, you do not want even the slightest noises coming from your mic. The microphone consists of a casing and there is a cartridge inside the case. You do not want that cartridge moving around. We made sure to adjust our mechanism and ensure the cartridge is firmly in place and not creating any unwanted noises.
Best Value
After testing our Rockville condenser mics against mics that cost 300% more money, we found ours to be as good or better than the ones we tested against.
What's Included:
- RCM03 Condenser Microphone (made of aluminum!)
- 100% Copper 10 foot 3.5mm jack to XLR cable to connect mic to your computer or other device
- 100% Copper 10 foot XLR to XLR cable to connect to any mixer with phantom power
- Metal shock mount
- Metal Anti-wind foam cap
- Owners Manual
- Warranty card
Features:
- Rockville RCM03 Pro Studio Recording Condenser Microphone Mic+Metal Shock Mount
- Aluminum high quality construction
- Polar Pattern: Internally Polarized Condenser Cardioid Design
- Large diaphragm for smooth, natural sound and low noise
- Power Requirements: 48V DC Phantom Power
- Uni-directional
- Sensitivity: -27dB±2dB(0dB=1V/Pa at1kHZ)
- Output impedance: 200O±30%(at 1kHz)
- Standard operating voltage: 3V
- Operating voltage range: 1.5V-10V
- Current consumption: less than 500uA
- Voltage deduction characteristic: within 3dB at 2V
- S/N ratio: More than 24dB
- Frequency Response: 30Hz - 20 KHz
- Fixed Crossover Filter cutoff frequency: 40Hz---16 KHz
- Load impedance: Greater or = to 1000 Ohms
- Equivalent Noise level: Less than 18dB A (IEC581-5)
- Max. Input SPL: 126dB(THD=1.0% at 1kHZ)
- Electrical current: Greater than 4.8Ma
- Microphone body net weight:320 Grams (0.7 Pounds)
- Microphone Max.diameter 44mm (1.73” inches)
- Microphone Length 217mm (8.54” inches)
- Microphone material: steel grille + Alluminum (handheld part)
- PCB Layout: Surface mount
About Rockville Quality Control Procedures:
The Rockville brand stands for Quality, Innovation and Value. All Rockville products go through the most rigorous quality control standards in the industry. Products go through months of extensive testing before they reach your hands. All user functions are tested and all internal components are tested for quality. Rockville makes products that are virtually un-breakable! Rockville is one of the only brands in its class to test every concept model for weeks or months before starting production. Once production begins, Rockville sends product engineers to their factory to quality control every line of production. During production every product is tested and on top of that Rockville goes the extra mile and has their high level product engineers do an additional quality control. They test a certain percentage of all products from the production line a second time to ensure that the quality meets their vigorous standards, and to make sure that there is never a batch of products with even a slight problem. All Rockville products are backed with a hassle free warranty.Includes:
- PRO-M50 headphones
- Detachable cable
- Soft suede and leather ear cushions (interchangeable)
- Leather hard travel protective case
- Gold plated ¼" adapter
All About Your PRO-M50:
Description:
Rockville brings you studio quality headphones and at an incredible price with its new PRO-M50 headphones. These are professional grade headphones that are guaranteed to ourperform headphones that cost triple the price! These feature ergonomically designed swiveling cups with interchangeable soft suede or leather finish cushions (included). The ear cups seal tight for excellent sound isolation and minimal bleed. Inside these cups you'll find 40mm Neodymium drivers delivering accurate audio with an extended frequency range for clear and rich bass, and a full frequency range of mids and highs. These are closed back style headphones specifically designed for studio monitoring. These play back the sound with a flat frequency curve so you can hear your music exactly how it was recorded. With the PRO-M50 you can expect to hear every detail of every song with extreme accuracy. These headphones cover full frequency ranges; even extending a bit past the frequencies that the human ear can hear.
The headband is made of soft leather, offering ultimate comfort even after extended wear. The beautifully designed stainless steel headband frame and arms are strong and durable. A detachable 51" coiled 100% Oxygen Free Copper cable with a gold plated 3.5mm plug is included along with a gold plated ¼" adapter to ensure the best possible signal. A hard leather case is included to store and protect your new investment when you are on the go.
Amazing sound quality will make these your go-to headphones whether in the studio or out and about!
Features:
- Rockville PRO-M50 Studio Headphones w/ Detachable Coil Cable, Case+Extra Ear Pad
- Professional High-Definition Studio Headphones
- 40mm Neodymium drivers
- Ergonomically designed swivel ear cups
- Supreme sound isolation
- Accurate sound reproduction
- Minimal bleed
- Sturdy and durable steel headband and arms
- Soft leather headband cover
- Interchangeable leather and soft suede ear cups covers included
- Detachable 51" coil cable made of 100% Oxygen Free Copper (158" fully extended)
- Gold plated 3.5mm connector
- Gold plated ¼" adapter
- Hard leather carrying case
- Stainless steel headband frame and moving arms are durable and long-lasting
Specifications:
- Style: Closed-Back
- Design: Circumaural
- Transducer Type: Dynamic
- Driver: 40MM
- Sensitivity: 97±3dB
- Impedance: 32ohm
- Frequency Response:10Hz - 25KHz
- Max. Power: 600MW
- Rating Power: 260MW
- Net Weight: 290g (with cable)
Video of RDTS:
Features:
- Rockville RDTS Adjustable Height Studio Desktop Tripod Microphone Stand and Mic Clip
- Includes standard mic clip for regular mics
- For condenser mics – this is compatible with any shock mount (Rockville Rockshock is recommended)
- Compatible with Rockville IPS22 phone/tablet holder (sold separately in our store)
- Foldable design
- Adjustable height from 5.9” to 7.1” inches
- Includes standard mic clip
- Includes a Metal 3/8 to 5/8 adapter to support any mic clip on the market
- All metal construction is extremely strong and durable
- Smoothly raise or lower height with a reliable tightening knob
- Stable tripod leg base provides the ultimate stability and precise balance
- Perfect for studio recording, home recording, podcasts, screen-casts, video chats, conferences, and more
- UPC:
- 613817055790
