null
  • 90 Day Hassle Free Returns
  • Free Same Day Shipping
  • Expert Advice
  • Lowest Price Guarantee

10" Rockford Fosgate Subwoofer+Amplifier+Sub Box+Amp For 2002-17 Dodge Quad Cab

SKU:
R2D2-10+RXD-M1+RWK41+REC61+K1
$574.96 $299.99
(You save $274.97)

Out of stock

Enter your email address to be notified when this item is back in stock.
Condition:
New
Bundle:
Yes

Warranty Information:

1 YEAR

New orders ship within 1 business day

Call for Expert Advice
Call now: 1-646-758-0144

Package Includes:

  • (1) Rockford Fosgate 10" Car Audio Subwoofer
  • (1) 2002-2017 Dodge Quad Cab Single 10" Ported Vented Subwoofer Sub Box Enclosure
  • (1) Rockville RXD-M1 500 Watt CEA Compliant Rating Mono Class D Car Amplifier
  • (1) Rockville RWK41 4 Gauge Complete Car Amp Wiring Installation Kit w/RCA's
  • 10 Drywall Wood Screws (Wood screws are the type of screws; the screws are actually made of metal)
  • 12 Feet of 14 AWG Blue Speaker Wire
  • 2 Spade Terminals

Features of Rockford Fosgate Sub:
  • Rockford Fosgate R2D2-10 Prime 10" 500 Watt
  • Size: 10 inches
  • Peak Power: 500 Watts
  • RMS Power: 250 Watts
  • Nominal Impedance: Dual 2-Ohm
  • 12 AWG compression terminals
  • Anodized aluminum voice coil former
  • Integrated PVC trim ring
  • Linear spider with embedded 16 AWG tinsel leads
  • Mica injected polypropylene cone
  • Optimized for both sealed and vented enclosures
  • StampCast basket with integrated spider venting
  • Cutout Diameter: 9.125 inches / (232 mm)
  • Mounting Depth: 4.319 inches / (109.7 mm)
  • Voice Coil Diameter: 2" / (51 mm)
  • Magnet Weight: 43 oz / (1.22 kg.)
  • Speaker Connector: Dual 12 AWG compression
  • Woofer Displacement: 0.039 cu.ft / (1.1 Liters)
  • Woofer Displacement: 0.101 cu.ft / (2.85 Liters)
  • Shipping Weight: 8.8 Lbs / (3.99 kg)
  • Fs (Hz): 34.6
  • Re (Ohms): 3.84
  • Le (mH): 3.9
  • Qms: 6.93
  • Qes: 0.50
  • Qts: 0.47
  • Vas (Liters): 39
  • Sd (cm2): 339.8
  • SPL (dB @ 1w/1m): 86.9
  • Xmax (mm): 6.5
  • Sealed - Enclosure
    • Vb: 0.59 cu.ft
    • F3: 57.5 Hz
    • Qtc: 0.75
    • Height: 15.75 inches
    • Width: 17.5 inches
    • Depth: 6.25 inches
    • Speaker Cutout: 9.125 inches
    • Speaker Depth: 4.319 inches
    • Vd: 0.101 cu.ft
  • Vented - Enclosure
    • Vb: 1.40 cu.ft
    • Fb: 43 Hz
    • F3: 37.1 Hz
    • Height: 14 inches
    • Width: 17 inches
    • Depth: 15.25 inches
    • Np: 1 port
    • Dp: 4 inches diameter
    • Lp: 13.1 inches long
    • Speaker Cutout: 9.125 inches
    • Speaker Depth: 6.319 inches
    • Vd: 0.101 cu.ft
    • Vp: 0.095 cu.ft
    • Recommended Enclosure Type: ported or sealed
    • Minimum Sealed Box Volume: 0.50 cubic feet
    • Optimum Sealed Box Volume: 0.75 cubic feet
    • Maximum Sealed Box Volume: 0.85 cubic feet
    • Minimum Ported Box Volume: 0.70 cubic feet
    • Top-Mount Depth: 4.57"
    • Cutout Diameter: 9.13"

Video of RXD-M1:

Description:

Over the years, the technology used to create audio amplifiers has grown by leaps and bounds. We consider it our mission to use our expertise in developing the latest technologies and to bring you the absolute best sounding amplifiers on the market and of course at a reasonable price. From its clean, sleek design to its high quality components, you will be amazed at the quality and power that these new Phenom amps offer.

The RXD-M1 is a class D monoblock high power amplifier with 2,000 watts peak output, 1,000 watts RMS output and 500 watts CEA-2006 rated power. It is CEA-2006 compliant which makes it easy to compare this amplifier to other CEA compliant amps on the market. The issue the car audio world is facing today is that there are so many different brands with different standards on how they rate their products. Here at Rockville we offer the best value in car audio. We therefore want to make it easy for you to compare our products to any brands on the market. So we provided 3 ratings for all our car amplifiers. We provided a CEA compliant rating, which you should use to compare this amplifier to other premium brands that make CEA compliant products such as Kicker, Rockford Fosgate, Kenwood, Pioneer, etc. We also supplied an RMS rating that Is not CEA compliant but has become standard in the industry. You should use this rating when comparing with ratings from brands such as Hifonics, Earthquake, DB Drive, etc. Lastly, we also supply a peak rating which almost all brands In the industry provide. This peak power is the amount of power the amp puts out at the loudest moments during a particular song.

One of the tricks to determine the real power of a car amplifier is to multiply the fuse rating by 10 to determine the true RMS power. This formula almost always works within 20 %. RXD-M1 features a Maxi fuse with a rating of 60 Amps. Compare this to other amps on the market with similar fuse ratings and you’ll see that with the RXD-M1 you are getting your money’s worth and then some.

This unit also features a high speed MOSFET power supply and studio-grade bipolar output stage transistors. It has a fully adjustable 12dB/Octave cross over with differential circuitry. Other features include a subsonic filter, a fully adjustable bass equalizer, mute and delay soft start technology, a phase control switch, and a dashboard subwoofer control for added convenience. The RXD-M1 is protected by a full IC controlled circuit and has professional peak limiter circuitry guaranteeing distortion free musical playback at all levels.

The RXD mono amplifiers took years of engineering. A lot of new technology went into these amps. We call this technology optical coupler Class-D. This new technology gives the amplifier punchier bass compared with a typical class “D” amp. A major difference in our OC technology is the preamp input stage and output stage are separated in circuitry. It is less susceptible to noise, which typically is picked up from the preamp input. The RCA input accepts both balanced and un-balance inputs. If there is potential inference in the car, the balanced input signal is less susceptible to noise.

The Phenom amps by Rockville use only the top parts. We use Siemens correction capacitors which are well-known for producing crystal clear sound quality. We use TL072 OP (power supply) which is composed of mosfets. Typical class “D” amps use JRC4558, which is composed of transistors only. Mosfet power supplies have a higher speed, lower loss rate, lower noise, and ultimately supply more efficient and clean power along with lower THD (distortion). We redesigned the layout of the PCB boards to allow the amp to run smooth and cool. Each and everything amplifier we manufacture is tested twice. Once at the semi-finished PCB stage of production and then another test is done at the final assembly. We also run age tests on them. After this is all done, we hire a 3rd party independent company unaffiliated with our factory or with us to go to the factory and do random inspections of the power and over 20 other tests. We guarantee these amps will satisfy you. We are so confident in your satisfaction of this amplifier that we will offer you a 90 day money back guarantee. This means if for any reason you want to return the amplifier back and get a full refund we will send you a label and take the amp back and give you all your money back. (Amp must be complete along with the box).

Features:

  • Rockville RXD-M1 2000 Watt/1000 Watt RMS Mono Class D 1 Ohm Car Stereo Amplifier With Optical Coupler Technology
  • CEA Compliant Power Ratings (Rated at less than 1 % distortion) (Use these CEA ratings when matching and comparing with other CEA compliant brands such as Kicker, Rockford Fosgate, etc)
    • 1 Ohm: 500 Watts x 1 Channel <1% THD+N
    • 2 Ohm 350 Watts x 1 Channel <1% THD+N
    • 4 Ohm: 250 Watts x 1 Channel <1% THD+N)
  • RMS Power Ratings: (Use these RMS ratings when comparing with great brands such as Hifonics, Earthquake, Soundstream, etc)
    • 1 Ohm: 1000 Watts x 1 Channel
    • 2 Ohm 700 Watts x 1 Channel
    • 4 Ohm: 500 Watts x 1 Channel
  • Peak: (The amount of power the amplifier can produce for a split second at the loudest part of a song
    • 1 Ohm: 2000 Watts x 1 Channel
    • 2 Ohm 1400 Watts x 1 Channel
    • 4 Ohm: 1000 Watts x 1 Channel
  • High-Speed MOSFET Power Supply
  • Optical Coupler Class “D” Technology
  • Studio-Grade Bipolar Output Stage Transistors
  • Now exclusively with “Professional Peak Limiter Circuitry” which guarantees distortion free musical playback at all levels.
  • Fully Adjustable 12dB / Octave Crossover with Differential Circuitry
  • Low Pass Filter: 50Hz - 250Hz
  • Subsonic Filter: 15Hz - 55Hz
  • Phase Control Switch
  • Full IC-Controlled Protection Circuitry
  • Remote Dashboard Subwoofer Control
  • Fully Adjustable 12dB Bass Equalizer
  • Mute and Delay Soft Start System
  • RCA Preamp Line Output
  • 8 Volt Preamp Circuitry
  • Status Mode LED Indicator
  • Minimum THD at Rated Power: < 0.05%
  • S / N Ratio: > 100dB
  • Frequency Response: 10Hz - 500KHz
  • Damping Factor: > 200 @ 100Hz
  • 50 Amp Maxi Fuse
  • Dimensions: (W x H x L) 8.5" x 1.8" x 12.5"

Owner’s Manual

About Rockville Quality Control Procedures:

The Rockville brand stands for Quality, Innovation and Value. All Rockville products go through the most rigorous quality control standards in the industry. Products go through months of extensive testing before they reach your hands. All user functions are tested and all internal components are tested for quality. Rockville makes products that are virtually un-breakable! Rockville is one of the only brands in its class to test every concept model for weeks or months before starting production. Once production begins, Rockville sends product engineers to their factory to quality control every line of production. During production every product is tested and on top of that Rockville goes the extra mile and has their high level product engineers do an additional quality control. They test a certain percentage of all products from the production line a second time to ensure that the quality meets their vigorous standards, and to make sure that there is never a batch of products with even a slight problem. All Rockville DJ/PA speakers are backed with a full 1 Year warranty, though it is unlikely that you will need to use it.

Video of RWK41:


Unboxing Video for RWK41:



Authorized Rockville Dealer!

Description:

The Rockville RWK41 4 AWG (American Wire Gauge) amp kit has the following differences over other amp kits on the market at this price point.

1. Our RCA cables are 100 % copper. These are top of the line RCA cables

2. Better Resistance: The only thing that really matters with wires is the resistance rating. This is a measurement of conductivity and how much signal is loss per foot of wire. Since Rockville wires are made with around 3 times as much copper as any other wire at this price point, these wires had a much better resistance rating which means they will transfer more power to your amps than the other brands.

3. We do not cheat you on the thickness of the wire. These are standard American wire gauge thickness. This is another reason our conductivity is better than anything else at this price point. Other brands in the market place write 4 gauge, but cheat you on the thickness. We are honest about the thickness.

4. The Rockville amplifier installation kits feature a new soft abrasion proof insulating jacket. This rugged PVC outer jacket allows for 100% improved flexibility over standard power cables making them extremely easy to route through your vehicles interior, and it maintains exceptional resistance to grease and oil. The PVC outer jacket can with-stand an extreme temperature range of -40 to 220 degrees F.

The RCA signal transfer cables included in this kit feature blue and silver twisted pair technology in a clear outer jacket insulation skin. Not only do the blue and silver wires look cool but they also provide superior signal transfer with maximum noise suppression. They are 100% copper to provide absolute lossless perfect signal transfer to your receiver. This technology reduces interference, so your audio signal flows clean and pure at all power levels.

This kit also includes a massive 60 Amp AGU Gold Plated Fuse, so you can be sure it will handle the all the DC power that your amp will need without even the slightest loss of current. The included 7 split loom tube provides protection for your power cable from the typically harsh environment found under the hood of your car.

Audiosavings product experts have tested this amp kit against many leading amp kits on the market and were were impressed not only by the great looks but by the quality of these Rockville installation kits as well. These kits had a lower resistance rating than the other brands we compared and tested them against. What this means is that Rockville manufactures their kits with more copper than other kits at this price point, ultimately providing your amplifiers with better and cleaner DC power, so they work cooler and more efficiently. You will hear the difference a Rockville installation kit will make!

Features:

  • 1 – 17’ High Grade Twisted Pair of 100% Copper RCA Cable
  • 17’ – 4 Gauge Translucent Blue SuperFlex Power Cables
  • 17’ – 18 Gauge Blue Remote Cable
  • 17’ – 16 Gauge Clear Speaker Wire
  • 3’ – 4 Gauge Clear SuperFlex Ground Wire
  • Gold Plated AGU Heat Resistant Fuse Holder
  • 60 Amp AGU Gold Plated Fuse
  • 7’ Split Tube Loom
  • Accessories Included: Wire Ties, Ring Terminals, Butt Connectors, Spades, and Grommets

Features of Rockville Enclosure
  • 2002-2017 Dodge Quad Cab Single 10" Ported Vented Subwoofer Sub Box Enclosure
  • Single 10" Ported for Dodge Quad Cab 2002-2016
  • Underseat Upfire
  • Finished with Durable Bed Liner
  • 2002- Current Dodge Quad Cab, Does NOT fit Mega Cab
  • Mounting Depth: 7.5” (inches)
  • Mounting diameter (hole size): 9” (inches)
  • Wood thickness: 5/8” (inch)
  • Air space: 0.9 Cubic feet
  • Material: Highest-grade MDF wood on the market

****For installation, cut the carpet from under the seat, and in the Pockets/Wells


Complete Single Subwoofer Enclosure Installation Kit!

Includes:

  • 10 Drywall Wood Screws (Wood screws are the type of screws; the screws are actually made of metal)
  • 12 Feet of 14 AWG Blue Speaker Wire
  • 2 Spade Terminals

This accessory package includes everything you need to install one subwoofer into an enclosure, and wire to connect the enclosure to your amplifier. This package is a top of the line accessory package which we put together and tested.

The drywall wood screws were hand selected by our installation experts because they drill into the enclosure very cleanly, without chipping the enclosure. The speaker wire is 14 gauge. This is way better than using 16 gauge. You can be 100 % sure that your enclosure will have a clean signal to the amplifier with this top of the line speaker wire. These spade terminals have also been hand selected by our installation experts to make the internal wiring simple, secure, and to run the audio signal cleanly.

1 YEAR
  • UPC:
  • 613815958178

WARNING: Cancer and Reproductive Harm — www.P65Warnings.ca.gov

New orders ship within 1 business day
Back to links
Our tech support representatives are product experts and can help you choose the best item for your needs. We can also help you with installation or troubleshooting problems. Our tech reps are available Monday to Friday from 9 AM to 5 PM EST. Our customer support reps are available 24/7.
Back to links
At Rockville you are buying manufacturer direct and we guarantee our prices are the lowest around. If you find a better deal then we want to know about it. You can Email sales@rockvilleaudio.com with the link and we will look into it and get back to you.
Back to links