Package Includes:

• (1) Novation Peak Eight-Voice Desktop MIDI USB Polyphonic Synthesiser For MAC or PC
• (2) Rockville DPM5B 5.25" 2-Way 300W Black Active/Powered Studio Monitor Speakers
• (1) Pair of Rockville RRS190S Foam Studio Monitor Isolation Pads 7.5" x 9.5"/3 Angles
• (1) Rockville RVSM1 Pair of Near-Field Studio Monitor Stands w/ Adjustable Height
• (1) Rockville PRO-M50 Studio Headphones w/ Detachable Coil Cable, Case+Extra Ear Pad
• (1) Rockville RCM03 Pro Studio Recording Condenser Microphone Mic+Metal Shock Mount

---

Authorized Novation Dealer!

Description of PEAK:

Eight-voice polyphonic synthesizer
Peak sounds warm and rich with filthy, biting overdrive. It’s an eight-voice desktop polyphonic synthesiser with three New Oxford Oscillators for each voice. The synth has a resonant multi-mode analogue filter for each voice, and three distortion points in an analogue signal chain.

Analogue where it matters – digital where it counts
Peak’s design consultant was none other than Chris Huggett, the man behind Bass Station, Supernova, OSCar and many more legendary synths. Peak has its origin in the Bass Station II analogue monosynth, and Peak’s oscillators sound completely analogue by being high-quality NCOs (Numerically-Controlled Oscillators), but gain the flexibility of the digital domain with 17 digital wavetables.

Build and refine new sounds from scratch
Broaden out your electronic music, draw in new influences and take artistic risks. The modulation system puts the most frequently used assignments right at your fingertips in the main controls. More elaborate movements and secondary ‘via’ assignments are made just a few menu button presses away.

Connect to just about anything
You can plug Peak into your Mac or PC via USB and start playing. It also has MIDI I/O on five-pin DIN ports, so you can connect your other MIDI gear. Oh, and did we mention it connects to modular systems via a CV modulation input

Features:

• Novation Peak Eight-Voice Desktop MIDI USB Polyphonic Synthesiser For MAC or PC
• Two ways to create waveforms - Analogue-sounding NCOs (Numerically-Controlled Oscillators) and 17 digital wavetables.
  
• A colossal amount of distortion - Three distortion points for each voice – pre-filter, post-filter and global – in an analogue signal chain.
  
• Control expression - Peak is capable of receiving polyphonic aftertouch, which puts expression right at your fingertips.
  
• Cross-modulate oscillators - The three New Oxford Oscillators for each voice can become a linear FM source using either the analogue-sounding NCOs (Numerically-Controlled Oscillators) or digital wavetables. They are also able to cross-modulate in a recursive loop.
  
• Huge modulation system - 16-slot modulation matrix and 16 direct assignments controlled from the front panel, cleverly arranged for intuitive patch design and sound editing. Three ADSR envelopes and two LFOs for each voice.
  
• Easily switch modulations - Two animate buttons give live performers instant one-touch transformation of patches.
• Mind-blowing sounds on-board - Reverb, delay and chorus at your disposal, and there’s also an arpeggiator.
  
• Connect to hardware and software - Connect and sync to your music software and MIDI-compatible hardware. CV modulation input used to slot together modular systems.
  
• Store unlimited sounds - Keep as many patches as you like on your Mac or PC using the Components software. Learn more about Components here.
  

Specifications:

• 42 Control knobs
  
• 8 35mm Sliders
  
• 1Volume knob
  
• 2 Data encoders
  
• Rubberised knob caps with spun metal discs
  
• 30 Function buttons (not lit)
  
• 16 Function buttons (lit)
  
• 2 Animate buttons plus hold button
  
• 90 Indicator LEDs
  
• OLED display
  
• Kensington Security Slot
  
• Power switch
  
• Power supply connector
  
• USB socket
  
• MIDI In / Out / Thru
  
• 2 1/4" jack socket for continuous or switched pedals
  
• 3.5mm jack socket for CV in
  
• 1/4" jack sockets for left and right outputs
  
• 1/4" jack socket for headphone output
  
• Metal chassis with wooden end cheeks
  
• Metal magnetic inset end pieces
  
• Synth Engine:
  
• 8 note polyphony (dependent on voices used per note)
  
• Mono-Timbral
  
• Per voice:
  
• 3 oscillators
  
• 1 noise generator
  
• 1 ring modulator
  
• 2 LFOs
  
• 1 Amp envelope and 2 mod envelopes
  
• 1 Filter
  
• Waveforms include:
  
• Sine, tri, sawtooth, square / pulse plus 17 wavetables of 5 waveforms per row
  
• Filter:
  
• 1x State variable OTA filter per voice
  
• 12/24dB slope
  
• Low-pass / band-pass / high-pass
  
• Pre-filter overdrive
  
• Post-filter distortion
  
• Modulation:
  
• 16 modulation slots per patch
  
• Each slot has 2 sources to 1 destination
  
• Mod sources (17):
  
• Direct (depth)
  
• Modulation wheel
  
• Aftertouch (polyphonic and channel AT)
  
• Expression pedal 1
  
• Expression pedal 2
  
• Keyboard velocity
  
• LFO1 positive
  
• LFO1 bi-polar
  
• LFO2 positive
  
• LFO2 bi-polar
  
• Amp envelope
  
• Mod envelope 1
  
• Mod envelope 2
  
• Animate 1
  
• Animate 2
  
• CV mod input bi-polar
  
• Mod destinations (37):
  
• Oscillator 1-3 frequency, v-sync level, shape amount and level
  
• Noise source level
  
• Ring modulator output level
  
• Overal synth output level
  
• Filter drive, distortion, cut-off frequency and resonance
  
• LFO 1 and 2 frequency
  
• Amp env / mod env 1 / mod env 2 attack, decay and release
  
• FM Osc 1 -> osc 2, osc 2 -> osc 3, osc 3 -> osc 1 and noise -> osc 1
  
• Osc 3 -> filter cutoff frequency
  
• Noise -> filter cutoff frequency
  
• Effects:
  
• Analogue distortion
  
• Chorus - 3 types
  
• Delay w/delay sync
  
• Reverb - 3 types
  
• Misc:
  
• Arpeggiator w/ key latch – 33 patterns
  
• Patch storage - up to 512 on hardware (ships with 256 factory patches)
  
• Glide
  
• Software Compatibility:
  
• Ableton Live Lite 9 is included
  
• Peak is a USB-MIDI class compliant device
  
• Power Requirements:
  
• Maximum power consumption 12V DC 1A
  
• Product Dimensions:
  
• 233mm (9.17") width x 464mm (18.27") depth x 70.5mm (2.78") height
  
• OS Compatibility:
  
• OS compatibilty not relevant for this product range/type

---

Video of DPM5B:

The Rockville DPM5 Active/Powered Studio Monitor Speaker is a step-up version of our popular APM series. These speakers are sold individually and each speaker is bi-amped which means it has one amp for the highs, and another for the lows. These speakers have 150 watts of peak output power and 75 watts RMS. These sound better than the famous brand studio monitors. They have a flat frequency curve making these the perfect studio monitors. The only reason our price point is not 300 % higher is because you are buying directly from the manufacturer. We are one of the leading speaker manufacturers in the USA, and we have a state of the art manufacturing process. There is a lot to talk about so I will break it down into sections.

Description of the Enclosure:
We chose a wooden enclosure as opposed to a plastic enclosure. Your studio is made of wood for a reason. The sound characteristics of high quality wood are better than plastic. We only use the highest quality MDF wood. We do not bother with cheap particle board material when we want to make the best speakers. The thickness is 0.5” around and the front board is a full 1” thick to give you the best sound quality possible. The enclosure is built with the perfect amount of air space to maximize sound quality for a studio.
Every studio or computer room should look beautiful. We believe speakers should enhance the look of a room. We make these speakers in 3 beautiful finishes: painted black, painted white, and wood finish. We use “baking paint” made for wood surfaces. Baking paint is long lasting and is the best paint for speakers! We went with a beautiful finish that is mostly matte with a slight shine to it. Our designers spent countless hours on the color and design to make sure it is not only beautiful, but elegant as well to improve the appearance of your studio or room. We kept all the controls on the back of the speaker, which will keep the speaker looking very clean and modern. The tweeter has a curved front bezel to make the highs crystal clear and distortion free.

Amplifier and Speaker Components Details:
To get the most efficiency we use a class “D” amplifier. We use the best quality components from the most reputable circuit manufacturers in the world in order to produce crystal clear sound. Most brands do not like to reveal what’s in the guts of the speaker. We feel differently. We want you to know what is inside so you realize how good of a value we are offering and also so that you can understand how good these really are. We use ADAU 1701 Digital Sound Processor (DSP) for audio processing and TPA3116 for amplification. These are both known to be the best in class circuit designs. These components are amazing and allow us to adjust the sound via soft programming on a computer during the design stage to get the perfect sound. ADI and TI are the names of the makers of these ICs. Most people do not know the brand names that make circuits; but these are the most famous and reliable in the industry. Only very high end manufacturers like us use these components.

For highs, we use Ferro fluid enhanced 1" neodymium silk dome tweeters with metal grill protection. If you are an audiophile, I am sure you have tested and love the sound of silk dome tweeters. The neo magnet is strong and can handle a lot of heat. This enabled us to beef up the amplifier power without having to worry about melting or blowing the tweeter. The highs on these sound really good! I cannot wait for you all to hear it in person, because I cannot describe how good these sound! You really need to listen to them in person.
We use a 5.25” woofer that will out-perform a regular 5” woofer any day! The bass sounds amazing on these! Very clear and punchy! The woofer has an injection molded polypropylene cone. This is an engineered type of plastic that is used on many speakers today. It is strong and puts out a great sound. The rubber woofer surrounds increase sound quality and eliminate unwanted distortions. They sound better than foam surrounds in my opinion, which is why we went with rubber. The computer optimized electronic crossover network supplies amazing sounding highs, lows, and mids — basically it filters out unwanted frequencies from each component so that each speaker plays the right frequencies, which in turn allows the speaker to be louder without distorting. We use very high-grade crossover filters in our speakers. The specially wound voice coils produce accurate responses along the entire frequency spectrum. We developed the speakers with the most optimized magnet structure, cone, and cabinet space, with the goal of reproducing the sound to play back exactly the way it was recorded!

Added Benefits:
Our factory uses the latest Precision Glue Machine (Over 500 meter Tunnel Oven). But you may ask why am I talking about glue! Well, actually, the glue on the speakers is of the upmost importance. If the glue does not hold up, the speaker will be done and blow. We use the latest machinery to manufacture these speakers. The SPL of the speaker goes up when you use better glue and a better machine that can secure the glue in place. If the glue can handle more heat, than your speaker can handle more power!

Thick “Wadding” protects the inside of the speaker cabinet. This can be seen if the speaker cabinet is removed. Basically, wadding is a white chemical silk type of material that we put inside the speaker cabinet for multiple reasons. It helps to make the sound clearer, and at the same time it protects all the parts inside the speaker. This material is also fire retardant. This is unique to our speakers. Most other brands do not take this step due to the cost of the material, but it is a game changer if you are trying to create the best speaker!

Inputs and Outputs and Rear Panel Controls:
As I mentioned earlier, we kept all the controls on the rear of the unit to make the speaker look clean and modern. The Volume, High Pass filter and Low Pass filter controls are all found on the rear of the unit. The DPM5 has all your standard studio inputs and outputs such as a ¼” TRS and XLR balanced input jacks, and RCA input.

Features:

• Rockville DPM5B 5.25" 2-Way 150W Active/Powered Studio Monitor Speakers in black
  
• Peak Power: 150 Watt
  
• RMS Power: 75 Watt
  
• Bi-Amped: 25 Watts for highs, and 50 watts for the lows
  
• Enclosure is made of top quality MDF wood. Our enclosure is not particle board; it is true high-grade MDF! The enclosure is 0.5” thick around while the front board of it is a full 1” thick to give you the ultimate best sound quality!
  
• We use “baking paint” made for wood surface. It lasts long and is the best paint for speakers!
  
• Beautiful finish is matte with a slight shine to it. Our designers spent a lot of time on the color to make it beautiful and elegant looking to improve the appearance of your studio or room
  
• The enclosure is built with the perfect amount of air space to maximize sound quality for a studio
  
• The port is built to the perfect spec to enhance the sound
  
• Auto-Switching Power Supply
  
• Ferro Fluid Enhanced 1" Neodymium Silk Dome Tweeter With Metal Grill Protection
  
• Tweeter has 1” voice coil diameter
  
• Curved Front Bezel Design Eliminates Standing Wave Distortion
  
• Injection Molded Polypropylene Cone Woofer
  
• Rubber woofer surrounds increases sound quality and eliminates unwanted distortions
  
• Computer Optimized Electronic Crossover Network Supplies Amazing Sounding Highs, Lows, and Mids
  
• We developed the Most Optimized Magnet structure, Cone, and Cabinet Space that Reproduces the Sound to Play Back Exactly the Way it was Recorded!
  
• Specially Wound Voice Coils Produce Accurate Responses along Entire Frequency Spectrum
  
• Distortion-Free Playback Even at Max Volume Listening! Very Clean Sound!
  
• Our factory uses the latest Precision Glue Machine (Over 500 meter Tunnel Oven). To put it in simple to understand terms; the glue on the speakers is of the upmost importance. If the glue does not hold up, the speaker is done. We use the latest machinery to manufacture these speakers. The SPL of the speaker goes up when you use better glue and a better machine the secure the glue in place
  Thick “Wadding” protects inside the speaker cabinet – Wadding is a white chemical silk type of material that we put inside the speaker cabinet for multiple reasons. It helps to make the sound come out more clear, and it also protects all the parts inside the speaker. This material is also fire retardant. This is unique to our speakers. Most other brands do not take this step due to the cost of the material, but it is a game changer!
  
• World class top of the line audiophile grade components! We use ADAU 1701 Digital Sound Processor for audio processing and TPA3116 for amplification. These are both known to be the best in class circuit designs. These components are also amazing and allow us to adjust the sound via soft programming on a computer during the design stage to get the perfect sound. ADI and TI are the names of the makers of these ICs. Most people do not know brands who make circuits, but these are famous in that industry and are known to be the best of the best. Only very high end products use these components
  
• 110 Volt compatible with SMPS technology – Normally most items have a transformer. Our SMPS technology switches voltage more efficiently and adheres to all international efficiency standards!
  
• Every Speaker in Production Undergoes a Computer Generated Sound Check Test to Ensure it Upholds to our Specifications and Standards
  
• We use a “6Sigma” style Quality Assurance of Each Product (Long story short, each product will work perfectly as advertised for a long long time!)
  
• Transducer Production Line to Make the SPL Performance Stable
  

Specifications:

• Certification: CE and RoHS Compliant
  
• Amplifier: Class D, very efficient amplifier with top components! (ADI--ADAU1701 DSP, TI--TPA3116, SMPS)
  
• System Impedance: Tweeter 6 Ω; Woofer 4 Ω
  
• Signal to noise ratio: 80dB (Maximum output with THD+1<1%, A-weight)
  
• Max SPL: 100dB @ 1w/1m
  
• THD: 0.10%
  
• Frequency Response: 55Hz - 20kHz
  
• 150 Watts peak output
  
• 75 Watt RMS output
  
• Input voltage: 120V
  
• Components: 1" neodymium silk dome tweeter and 5.25" woofer with rubber surrounds and polypropylene cone
  
• Product Dimensions in Inches (Single): (W*H*D) 7.4'' x 10.2'' x 9.8''
  
• Shipping Dimensions in Inches (For pair boxed): (W*H*D) 13.1'' x 13.5'' x 10.7''
  
• Net Weight: 11.03 LBS
  
• Shipping Weight: 13.24 LBS
  
• Includes signal cable and power cord
  
• Input Impedance (Ohms): 10 K Ohm Balanced
  
• System Volume: (-30dB to +6dB)
• Inputs / Outputs / Controls:
  
• Volume control
  
• Independent High (–2dB – +1dB) and Low (–2dB – +2dB) frequency level controls
  
• One each ¼” TRS and XLR balanced input jacks
  
• RCA input

Owner's Manual

---

About Rockville Quality Control Procedures:
The Rockville brand stands for Quality, Innovation and Value. We aim to deliver products twice as good as our competitors at a fraction of the cost of famous brands. All Rockville products go through the most rigorous quality control standards in the industry. Products go through months of extensive testing before they reach your hands. All functions and components are tested for quality. Rockville makes products that are virtually un-breakable! Rockville is one of the only brands in its class to have engineers and technicians test every concept model for weeks or months before starting production. Once production begins, Rockville sends product engineers to the factory to quality control every product. After production is comp

---

Video of RVSM1:

These heavy-duty Near-Field monitor stands are designed with home and project recording studios in mind. The height is adjustable for listening while sitting or standing, and locks in place with a security pin. Three rubber pads on the bottom of the base keep this stand stable on any surface. The entire stand breaks down into four pieces for easy storage and travel.

Includes:

• (2) Near-Field Monitor Stands

Features:

• Studio Monitor Stands (Pair)
• Adjustable Height
• Steel Construction
• Nylon clutch for adjusting
• EVA Pad on top to eliminate unwanted vibrations
• Triple enforced steel base with ultimate sturdiness
• Black Color
• Weight capacity: 80 lbs.
• Adjustable height Range: 33-45 inches
• Base: 17.7 x 17.7 x 17.7 inches
• Top Plate: 9.05 x 9.45 inches
• Tube Diameter: 1.5 inch- 1.37 inch

Owner’s Manual

---

The Rockville Difference:

Whenever you see the Rockville shield on a product you know that it has the stamp of approval. While other companies simply import products from China, Rockville manufactures the products in China to lower your cost but do so under American style supervision and quality standards to get you that USA quality that you want!

About Rockville Quality Control Procedures:

The Rockville brand stands for Quality, Innovation and Value. All Rockville products go through the most rigorous quality control standards in the industry. Products go through months of extensive testing before they reach your hands. All user functions are tested and all internal components are tested for quality.Rockville makes products that are virtually un-breakable! Rockville is one of the only brands in its class to test every concept model for weeks or months before starting production. Once production begins, Rockville sends product engineers to their factory to quality control every line of production. During production every product is tested and on top of that Rockville goes the extra mile and has their high level product engineers do an additional quality control. They test a certain percentage of all products from the production line a second time to ensure that the quality meets their vigorous standards, and to make sure that there is never a batch of products with even a slight problem. All Rockville products are backed with a full 1 year warranty, though it is unlikely that you will need to use the warranty.

Great features and great quality make Rockville a great choice.

---

Video of RRS190S:

Authorized Rockville Dealer!

Description:

The Rockville RRS190S is specially designed to increase monitoring accuracy. These are made to decrease unwanted vibrations and noises so that you are left with accurate sounds. No matter how good your monitors are, they can never sound the way they were meant to if they are carrying over vibrations and unwanted noises into your music.  These are 7.5" by 9.5" and includes 2 pads which will accommodate (2) monitors.

Isolate your speakers!
Rockville isolation pads are designed to acoustically isolate your studio monitors. They were designed to work in studios and give studio quality sound; however some customers will also use them for high end home theater setups. Typically when speakers are placed on hard surfaces, they can vibrate. The vibrations cause the speakers’ sound to become inaccurate, unfocused and lose their “musical transparency." The Rockville Isolation Pad package includes a pair of high-density acoustic foam pads with multiple angle inserts that allow you to fine-tune your speakers positioning. Though conceived and designed for studio monitors/speakers you can decouple and isolate any sensitive studio device such as DVD players, turntables and laptops.

How to get maximum performance from your Monitors!
Rockville Studio Isolation Pads are the most cost-effective improvement you make to your sound system. Imagine the isolation pads as being your speaker systems “shock absorbers”.  Place the Rockville Isolation Pads under your monitors they will absorb vibrations and decouple your monitor to stop vibrations that would otherwise transfer into your studio environment. Isolation Pads will make a day and night difference in the sound quality of your studio. You spent good money on your studio monitors, now go the extra mile to make them sound their best.

Rockville Studio Isolation Pads Feature:

• Easiest and affordable way to improve your studio monitors sound
• Decouples your studio monitors from desktops and monitor stands for accurate reproduction
• Each package contains 2 Isolation Pads - enough for 2 studio monitors
• 2-part angled design provides you with a wide range of tilt options, including flat, +/-4 degrees, and +/-8 degrees
• Supports up to 100 lbs., so they can isolate a variety of studio gear
• Handsome charcoal gray color

Decouple your monitors for super-accurate sound
What Rockville Isolation Pads do is called "decoupling." When your monitors sit on your desk or floor, they transmit vibrations that cause the surface that they're sitting on to vibrate at low bass frequencies. These bass vibrations don’t get recorded in to your mix because they are not really in your mix. But when you play the mix in your studio the “coupled” vibrations, will be heard giving you false sound reproduction. But because these “coupled” vibrations are not being recorded when you play your mix outside of your studio, all those low bass frequencies will be gone. By “decoupling: your monitors, you eliminate these false low frequency vibrations, helping you to create accurate mixes that will sound great on any playback system.

Perfectly position your monitors
Rockville Isolation Pads allow you to position your studio monitors at the exact angle you need. Each pad comes in two pieces, each with a 4 degree angle. That allows you to tilt your monitor at one of five different angles: flat, +/-4 degrees, or +/-8 degrees. This allows you to place your monitors flat on your desk top or angled down for proper positioning.
The most affordable way to improve the sound of your studio monitors

Features:

• Rockville RRS190S: Monitor Isolation Pads
• 3 Angle High Density Foam
• 7.5" x 9.5"
• High quality, High Density Foam
• Eliminates vibrations and unwanted noises in your studio
  
• Price is for (2) pads which accommodates (2) speakers

---

Includes:

• Pro-m50 headphones
  
• Detachable cable
  
• Soft suede and  leather ear cushions (interchangeable)
  
• Leather hard travel protective case
  
• Gold plated ¼” adapter

 

---

 

Video of PRO-M50:

Rockville brings you studio quality headphones and at an incredible price with its new PRO-M50 headphones. These are professional grade headphones that are guaranteed to ourperform headphones that cost triple the price! These feature ergonomically designed swiveling cups with interchangeable soft suede or leather finish cushions (included). The ear cups seal tight for excellent sound isolation and minimal bleed. Inside these cups you’ll find 40mm Neodymium drivers delivering accurate audio with an extended frequency range for clear and rich bass, and a full frequency range of mids and highs. These are closed back style headphones specifically designed for studio monitoring. These play back the sound with a flat frequency curve so you can hear your music exactly how it was recorded. With the PRO-M50 you can expect to hear every detail of every song with extreme accuracy. These headphones cover full frequency ranges; even extending a bit past the frequencies that the human ear can hear. 

The headband is made of soft leather, offering ultimate comfort even after extended wear. The beautifully designed stainless steel headband frame and arms are strong and durable. A detachable 51” coiled 100% Oxygen Free Copper cable with a gold plated 3.5mm plug is included along with a gold plated ¼” adapter to ensure the best possible signal. A hard leather case is included to store and protect your new investment when you are on the go.

Amazing sound quality will make these your go-to headphones whether in the studio or out and about!  

Features:

• Rockville PRO-M50 Studio Headphones w/ Detachable Coil Cable, Case+Extra Ear Pad 
• Professional High-Definition Studio Headphones
  
• 40mm Neodymium drivers
  
• Ergonomically designed swivel ear cups
  
• Supreme sound isolation
  
• Accurate sound reproduction
  
• Minimal bleed
  
• Sturdy and durable steel headband and arms
  
• Soft leather headband cover
  
• Interchangeable leather and soft suede ear cups covers included
  
• Detachable 51” coil cable made of 100% Oxygen Free Copper (158” fully extended)
  
• Gold plated 3.5mm connector
  
• Gold plated ¼” adapter
  
• Hard leather carrying case
• Stainless steel headband frame and moving arms are durable and long-lasting
  

Specifications:

• Style: Closed-Back
  
• Design: Circumaural
  
• Transducer Type: Dynamic
  
• Driver: 40MM 
  
• Sensitivity: 97±3dB
  
• Impedance: 32ohm
  
• Frequency Response:10Hz – 25KHz
  
• Max. Power: 600MW
  
• Rating Power: 260MW
  
• Net Weight:290g (with cable)

---

Video of RCM03:

Unboxing Video of RCM03:

 

 

 Authorized Rockville Dealer

The Rockville RCM03 condenser microphone performs better than famous branded microphones that cost over $150. This model is similar to our RCM01 however it is made of aluminum, and the frame is slightly larger. We also upgraded this model to a high end metal anti-wind cap! We highly recommend this design. This model is an amazing upgrade to our top selling RCM01 model!

Multi-Purpose
Designed for crystal clear capturing of vocals, acoustic and amplified instruments, as well as room reverb. The frequency pick up pattern makes the RCM03 amazing in studio applications.

The aluminum construction makes the RCM03 tough enough for Live sound applications as well!

Multiple connection options!
This microphone can be used in multiple ways. You can connect this to the phantom power of your mixer or you can connect it directly to your computer sound card. We include both cables! We include a cable to connect it to your mixer as well as a cable to connect the mic to your computer!

Quality built inside and out!
The microphone is made of aluminum. It is very rugged and tough like you would expect from any Rockville product. This microphone has a large diaphragm which is what enables our mic to deliver a wider range of high and low frequencies than our competitors. Our frequency range is tested at 30HZ – 20KHZ!  The mic sounds crystal clear sound with no distortion!

The PCB (circuit board) uses surface mounted components which is the same method the expensive brands use. We use only top components that under-go extreme testing by our own audio engineers.

The last thing that I need to mention and call out is that our product is very sturdy. Let me explain. When you are recording, you do not want even the slightest noises coming from your mic. The microphone consists of a casing and there is a cartridge inside the case. You do not want that cartridge moving around. We made sure to adjust our mechanism and ensure the cartridge is firmly in place and not creating any unwanted noises.

Best Value
After testing our Rockville condenser mics against mics that cost 300% more money, we found ours to be as good or better than the ones we tested against.


What's Included:

• RCM03 Condenser Microphone (made of aluminum!)
  
• 100% Copper 10 foot 3.5mm jack to XLR cable to connect mic to your computer or other device we need to update on ebay amazon, website, etc
  
• 100% Copper 10 foot XLR to XLR cable to connect to any mixer with phantom power
  
• Metal shock mount
  
• Metal Anti-wind foam cap
  
• Owners Manual
  
• Warranty card
  

Features:

• Rockville RCM03 Pro Studio Recording Condenser Microphone Mic+Metal Shock Mount
  
• Aluminum high quality construction
• Polar Pattern: Internally Polarized Condenser Cardioid Design
  
• Large diaphragm for smooth, natural sound and low noise
  
• Power Requirements: 48V DC phantom power or computer sound card (can connect to the phantom power channel of your mixer or can connect to your laptop or computer)
  
• Uni-directional
  
• Sensitivity: -27dB±2dB(0dB=1V/Pa at1kHZ)
  
• Output impedance: 200Ω±30%(at 1kHz)
  
• Standard operating voltage: 3V
  
• Operating voltage range: 1.5V-10V
  
• Current consumption: less than 500uA
  
• Voltage deduction characteristic: within 3dB at 2V
  
• S/N ratio: More than 24dB
  
• Frequency Response: 30Hz - 20 KHz
  
• Fixed Crossover Filter cutoff frequency: 40Hz---16 KHz
  
• Load impedance: Greater or = to 1000 Ohms
  
• Equivalent Noise level: Less than 18dB A (IEC581-5)
  
• Max. Input SPL: 126dB(THD≤1.0% at 1kHZ)
  
• Electrical current: Greater than 4.8Ma
  
• Microphone body net weight:320 Grams (0.7 Pounds)
  
• Microphone Max.diameter 44mm (1.73” inches)
  
• Microphone Length 217mm (8.54” inches)
  
• Microphone material: steel grille + Alluminum (handheld part)
  
• PCB Layout: Surface mount

Owner’s Manual