Package Includes:

• (1) Pair Memphis Audio MJP6C MOJO Pro 6.5" Competition Component Car Audio Speakers
• (1) Rockville CAR-EQ-OKE Car Audio 7 Band Equalizer w Bluetooth + Mic Input Karaoke
• (1) Rockville RMC-XLR High-End Metal DJ Handheld Wired Microphone Mic w (2) Cables

---

Features of MJP6C:

Two 6.5” Mid Range Speakers

• 125 watts RMS 250 watts peak
• 4 ohm impedance
• Sensitivity 100 (dB)
• Mounting depth 2.69”

Two 1” Tweeters

• 100 watts RMS / 200 watts peak
• 4 ohm impedance
• Sensitivity 105 (dB)

Two Crossovers

• Passive design
• 200 watts peak (input)

---

Video of CAR-EQ-OKE:

Includes:

• Equalizer
• Screws
• Bracket
• Owners manual
• Warranty card

Description:

The Rockville CAR-EQ-OKE is a multi-functional product that will change the way you listen to music in your car.

This is a high quality 7 band equalizer that allows you to fine tune your music. We also added Bluetooth so that you can play music from your smartphone or MP3 player in case your vehicles stereo does not already have Bluetooth.

What makes this product really unique is we added a microphone input with echo controls. You can take any wired microphone and plug it into the ¼” mic input and start singing along to your favorite tunes. If you go to car shows this is a great way to stand out from the crowd and have a party by your car. This is also cool if you are hanging out with a bunch of friends and you want to tailgate and do some karaoke or Caraoke.

Features:

• Rockville CAR-EQ-OKE 1/2 Din 7 Band Car Audio Equalizer EQ w/ Microphone Input, Echo and Bluetooth
• Bluetooth audio streaming from any smartphone or other Bluetooth-enabled device
• High quality Bluetooth transmission with long range and no distortion
• ¼” microphone input allows you to talk or sing through your car stereo
• Mic volume control
• Echo effect knob is perfect for karaoke
• 7 adjustable bands of equalization (50Hz, 125Hz, 315Hz, 750Hz, 2.2KHz, 6KHz and 12KHz)
• Each band is adjustable from -12dB to +12dB
• Built in crossover
• Subwoofer level controls
• Built in 7-volt line driver
• Blue LED lights on each rotary knob
• Front, rear, and sub pre-amp outputs
• Aux input with gain knob to adjust aux volume
• Strong metal chassis with high quality rotary knobs for all controls
• Includes mounting brackets and screws for easy installation
• Amazing quality with low distortion (Built with top quality components)
• Frequency response: 20Hz TO 20KHz +/- 1dB
• S/N Ratio: 95 dB
• Crossover Roll-Off: 12dB per octave
• Input impedance: 10K
• Input sensitivity: 200mv per channel >7V
• THD: 0.01%
• Input: 12V
• Output: 12V
• Power requirement: 11-16V DC
• Unit dimensions in inches: 7.08” x 5.51” 1.26”

Controls:

1. Master volume
2. Sub volume
3. Fader
4. Input selector switch
5. 50 Hz control (+ or = 12 dB)
6. 125 Hz control (+ or = 12 dB)
7. 315 Hz control (+ or = 12 dB)
8. 750 Hz control (+ or = 12 dB)
9. 2.2 KHz control (+ or = 12 dB)
10. 6 KHz control (+ or = 12 dB)
11. 12 KHz control (+ or = 12 dB)
12. Microphone volume control
13. Microphone echo control

Owner's Manual

---

How to Set Up RMC-XLR:

Video of RMC-XLR:

Description:

The Rockville RMC-XLR is the same exact microphone we use in our Pro Mic Kit 1 microphone/stand bundle. This mic was created because we saw a need in the market for a high quality microphone at an affordable price. We found there were a lot of good mics around from reputable brands that sound great, but are very expensive. When we looked at the cheaper mics on the market from both reputable and entry level brands; we were not impressed at all. As a result we sent our very own product developers on a mic testing journey. A lot of our employees here at Rockville love to do karaoke, so it was not long before we found a mic that we all loved.

You may be asking yourselves, so what makes this mic sound so good? There are 3 main components that make a mic sound the way it does. The cartridge, the magnet, and the mic cable. Our mic uses an M-56 cartridge which has a neodymium magnet. This combination of components supplies better sensitivity; which means your mouth will not have to be on the mic for it to pick up the sound. Our components supply more than a great pickup pattern. They have very little background noise, and great tone.

We pay a lot of attention to detail. We could have saved a lot of money and got our cost down by including a cheap cable, but we know how important the cable is. We are very passionate about our products and we really have a lot of respect for our customers. For this reason alone we included 100 % OFC copper cables. There is no aluminum in this cable! It is Pure oxygen free copper. What this means is that the cable will last longer and will sound a lot better. You will get a distortion free signal. We use a true gauge mic cable with proper thickness.

The body of the microphone is also something we paid a lot of attention too. We did not want it to be too light and feel cheap. We made a nice solid metal microphone. It has a great feel to it. We could have gone with plastic or cheaper metal, but we wanted to go with a mic that we ourselves would want to use.

90 Day Money Back Guarantee including return shipping!

If within the first 90 days you are not 100 % satisfied for any reason, contact us and we will send you a return label and give you all your money back! (Item must be returned complete with all accessories and the original box please.

What's Included:

• Fully metal wired mic
• (2) 100% OFC Copper Mic cables (XLR to ¼” + XLR to XLR )
• Mic clip
• Plastic carry case
• Owner’s manual
• Warranty

Features:

• Rockville RMC-XLR High-End Metal Handheld Wired Microphone Mic Amazing Sound!

Mic Features:

• M-56 Cartridge
• Full metal mic body
• Type: dynamic
• Neodymium magnet
• Polar Pattern: uni-directional
• Frequency Response: 80 - 13Khz
• Impedance: 600 Ohms ± 30%
• Sensitivity: -72 ± 3dB

Case Features:

• High quality plastic carry case protects the mic during transportation
• Comfortably holds microphone and mic cable

Cable Features:

• XLR to ¼” Cable
• XLR to XLR Cable
• 10 Feet each
• 100% OFC oxygen free copper
• Cable delivers crystal clear distortion free signal
• Cable is 5 MM thick with cover (22 AWG standard mic cable)
• XLR cable connectors are very solid and durable

Mic clip Features:

• Heavy Duty Standard Size Microphone Clip
• Stand Mountable
• Solid Plastic Construction with copper inside (part that screws to the mic)
• Black Color

Owner’s Manual