- (1) Rockford Fosgate Prime M1200-1D 1200 Watt RMS Marine/Boat Class D Amplifier/Amp
- (1) Rockville RMWK4 4 AWG Waterproof Marine/Boat Amplifier/Amp Installation Wire Kit
Features:
- Rockford Fosgate Prime M1200-1D 1200 Watt Mono Class D Marine Amplifier
- 1200 Watts RMS
- 600 Watts @ 4 Ohms
- 900 Watts @ 2 Ohms
- 1200 Watts x 2 @ 1-Ohm
- 12dB/octave Butterworth crossover
- 4 Gauge power/ground connectors
- Top mounted controls
- Conformal coated PCB
- UV resistant finish for UV & Salt-Fog protection.
- On-board Punch EQ with +18dB boost @ 45Hz.
- Tri-stage protection covers thermal, over-current and short circuits.
- Infrasonic filter
- Cast aluminum heat sink
- Remote PLC (Punch Level Control)
Details:
- CEA-2006 Compliant
- Number of Channels: 1
- Rated Power
- (RMS Continuous Power): 600 Watts x 1 @ 4-Ohm
- 900 Watts x 1 @ 2-Ohm
- 1200 Watts x 2 @ 1-Ohm
- Total Power
- (Sum of Rated Power): 1200 Watts RMS
- Dynamic Power
- (PVC/PowerCube® Measurement):
- Bridgeable: No
- Efficiency (average):
- 85% @ 4-Ohm
- 85% @ 2-Ohm
- 80% @ 1-Ohm
- Crossover Controls: Variable 50Hz - 250Hz @ 12dB/octave
- Tone Controls: 0dB to +18dB @ 45HzSignal Input: Low Level: 1 RCA Pair
- Speaker Output Connector: Block
- Speaker Wire Gauge: 12 AWG
- Heat Sink Type: Cast Aluminum
- Visual Indicators: Power, Protect
- Circuit Topology Class: Class-D
- Cooling: Convection
- Remote Controls: N/A
- Signal Output: Low Level: 1 RCA Pair
- Power Input Connector: Block
- Power Wire Gauge: 4 AWG
- Frequency Response: 20Hz to 250Hz +/-1dB
- Shipping Weight: 7.825 Lbs. (7.82 Kg.)
- Dimensions (HxWxL): 1.97" x 6.77" x 11.06"(5cm x 17.20cm x 28.10cm)
Video of RMWK4:
Unboxing Video of RMWK4:
Rockville's exclusive Professional Marine Installation Kit features top of the line accessories which have been specifically engineered to withstand the toughest of marine environments. You will hear the difference and we guarantee you will not be disappointed!
Rockville Marine Audio Interconnect cables are specifically engineered to withstand the challenges of both salt water and fresh water marine installations. The utilization of tinned Oxygen Free 100% copper conductors with polyethylene dielectrics in a twisted-pair arrangement optimizes noise rejection. The small-diameter white PVC jacket is ultra-flexible enabling our cables to be easily routed around bends and through tight spaces. Our exclusive molded connector features a water proof inner cap that is heat shrunk in place over all solder connections thus guaranteeing a completely water proof and corrosion resistant connection. The locking plug design with split pin technology further insures tight connections that will not vibrate free even during the most extreme boating maneuvers.
Our Marine Grade Speaker Cables are engineered for maximum signal transfer with minimum impedance loss. The cable strands are all individually tinned, fine-strand, oxygen-free copper with aluminum composite construction and provide a high-fidelity speaker connection that is especially engineered for the marine environment. Woven down to a flat shape, the cables can be easily routed throughout the bulkhead with ease.
Rockville Marine Power Cables feature strands which are all individually tinned, fine-strand, oxygen-free copper with aluminum composite construction corrosion resistant and marine-ready. Fine-strand construction and soft PVC jacket deliver excellent flexibility. Our marine cables are much better quality than standard CCA wire kits. These kits have a very generous amount of copper in them. They are very similar in quality to the best brands kits on the market. The thickness of the wire is true-gauge. We have seen other brands who use thick plastic but very little copper inside the wire. Rockville wires are honest, true-to-spec and will make your music sound great.
Features:
- Rockville RMWK4 4AWG Guage Waterproof Marine/Boat Amplifier Wire Installation Kit
- 25’ Translucent, Twisted Pair, High Quality, Tinned-CCA Flexible PVC RCA Cable
- 20’ 4 Gauge High Current, Low Impedance, Clear Flexible Power Cable with 3’ Black Poly Woven Mesh to better resist chemicals in the battery compartment
- 4’ 4 Gauge High Current, Low Impedance, Light Blue, Flexible Ground Cable
- 25’ 16 Gauge 100% Tinned-OFC, White, Non-Transparent Resin PVC, Flat Speaker Cable
- 20’ Blue Remote Wire
- 1PC Silver Mini-ANL Fuse Holder – Clear Shell and Clear Blue Bottom Bracket with Blue Waterproof Ring
- 1PC 60A Mini-ANL Fuse
- 2PCS Ring Terminals
- 2PCS Spade Terminals
- 5PCS Speaker Cable Terminals
- 1PC Washer
- 10PCS White Cable Ties
The Rockville brand stands for Quality, Innovation and Value. All Rockville products go through the most rigorous quality control standards in the industry. Products go through months of extensive testing before they reach your hands. All user functions are tested and all internal components are tested for quality. Rockville makes products that are virtually un-breakable! Rockville is one of the only brands in its class to test every concept model for weeks or months before starting production. Once production begins, Rockville sends product engineers to their factory to quality control every line of production. During production every product is tested and on top of that Rockville goes the extra mile and has their high level product engineers do an additional quality control. They test a certain percentage of all products from the production line a second time to ensure that the quality meets their vigorous standards, and to make sure that there is never a batch of products with even a slight problem. All Rockville products are backed with a hassle free warranty.
- UPC:
- 613816163304
