- (1) 2007-2016 JEEP WRANGLER JK 4-DOOR Powered 10" MTX Subwoofer+Sub Enclosure Box
- (2) Pairs of Polk Audio MM652 6.5” 600 Watt Car Audio Marine/ATV/Motorcycle/Boat Speakers
- (2) Metra 72-6514 Speaker Harness Connector for Chrysler/Dodge/Jeep Cherokee
Authorized MTX Audio Dealer!
Description of J-WRANGLER-07A:
Amplified Thunderform with a single, hard hitting, ten inch Terminator Subwoofer and integrated 250-watt amplifier. Fits Jeep - 4-Door Wrangler JK 2007-2018. Installs on driver side rear wheel well. Vehicle specific ThunderForm enclosures are designed to utilize space in vehicles that would otherwise go unused to add a subwoofer enclosure. These enclosures are highly durable and provide a custom fit so that you do not have to sacrifice cargo space for added aftermarket performance. This model includes a single 10" subwoofer and integrated 250-watt amplifier for an unbeatable listening experience with a stealthy factory look.
Stock Fit And Look
This Thunderform model is constructed using durable MDF and aviation grade
carpet to ensure durability over time. The included 10" subwoofer and integrated
250-watt amplifier that are perfectly matched to ensure peak performance in both
factory or aftermarket audio systems.
Note: Models with convertible soft tops will have a fitment issue with the subwoofer location. The top on that side will not sit flat as it will lay on top of the subwoofer enclosure. This issue can be resolved by either removing the soft top or purchasing a 3" spacer and 3.5" 1/4-20 bolt with security head from your local hardware store, which will move the enclosure away from the side of the Jeep allowing the convertible soft top to lay flat.
Features:
- 2007-2016 JEEP WRANGLER JK 4-DOOR Powered 10" MTX Subwoofer and Enclosure
- RMS Power Handling: 250 Watts
- Peak Power Handling: 500 Watts
- Frequency Response: 34 Hz - 140 Hz
- Easy install with perfect factory fit
- Utilize unused space in vehicle
- Molded the same color throughout so scratches won't show
- Easily Integrates with factory audio system
- Available for over 225 vehicles
- Includes installation hardware for an easy, flawless install
- Product Dimensions: 17.8" x 16.31" x 6.56" inches
- Product Weight: 24 Lbs.
Description of MM652:
The Premium Upgrade
Tuned
for the total sonic accuracy you get in a studio monitor speaker, the
MM1 Series reconfigures this high-quality sound for an on-the-go
experience that’s way beyond anything you’ll hear in an OEM factory
setup.
Engineered for High-Performance Sound
Every
element of the MM Series is meticulously engineered for
high-performance sound—Dynamic Balance technology, pivoting 1” terylene
tweeter, lightweight neodymium motor structure, high-temp Conex spiders
and oversized voice coils for increased
power handling.
Ultra-Marine Certified
Featuring
an IP56 rating that includes a non-corrosive fiberglass reinforced ABS
basket, epoxy coated crossovers, water-proof inner and outer surrounds,
weep holes for proper drainage and titanium-plated cones, you get extra,
long-lasting protection— that’s all salt-fog and UV tested.
Dynamic Balance Technology
Patented
process that guides material selection through rigorous testing that
identifies and cancels out unwanted resonant frequencies.
Included:
- Two 6.5" Coaxial Speakers
- 2 grilles
- Mounting hardware
- Wiring harness
- 2 plastic adaptor rings
Features:
- (2) Polk Audio MM652 6.5” 600 Watt Car Audio Marine/ATV/Motorcycle/Boat Speakers
- Driver Compliment: 6.5" (165.2 mm)
- Tweeter Compliment: 1" (25mm)
- Cutout Dimensions: 5" (127mm)
- Mounting Height: 0.32" (8.07mm)
- Mounting Depth (Top): 2.62" (66.5mm)
- Mounting Depth (Bottom): 2.86" (72.6mm)
- Peak Power Handling: 300 Watts per speaker
- Continuous Power Handling: 100 Watts per speaker
- Nominal Impedance: 4 Ohms
- Grille Height: 0.95" (24.2mm)
- Frequency Response: 35Hz-40kHz
- Sensitivity: 93 dB
- Magnet Weight: 1.38/0.15 oz
- Magnet Material: Neodymium
- Magnet Size: 29.5mm x 5mm x 12/24mm x 5mm x 2mm
- VC Diameter: 1.2"
Features of 72-6514:
- Metra 72-6514 Speaker Harness Connector for Chrysler/Dodge/Jeep Cherokee
- Quick and easy installation
- No cutting needed
- Plugs directly into harness
- Speaker Harness for Select Chrysler/Dodge Vehicles
- No cutting into original wires needed
- Plugs into original equipment radio
- UPC:
- 613815852483
