- (1) Rockville HTS8W Pair 8 1000W Powered Home Theater Speakers Bluetooth/FM/USB/SD
- (2) Rockville RHTSB 36" Inch Surround Sound Home Theater Speaker Stands
Videos of HTS8W:
Description:
The Rockville HTS8W is a complete all in one home theater system! You will not need to purchase anything else. This has everything built in! Each speaker has a powerful 8” woofer for incredible bass and a 1" neodymium silk dome tweeter for incredible highs. These speakers have Bluetooth, USB, SD, FM radio, and all of the inputs and outputs you will ever need. We also added a ¼” mic input so this system can be used for karaoke.
With the HTS series by Rockville you get:
- True studio sound in your home! These are the best sounding home theater speakers on the market!
- An entire home theater system all built into (2) speakers! No additional amps, radios, receivers, etc!
- Beautiful design that will enhance the look of any room in your house
- 90 day money back guarantee including return shipping. We know you will love these. If not, we will send you a pre-paid shipping label and return all your money.
Best sound on the market guaranteed!
Rockville’s APM series has been one of the top reviewed and bestselling
studio speakers on the market. What we did was we took the exact same
studio speakers and added Bluetooth, USB, SD, FM radio, and changed all
the inputs and outputs on them to create the ultimate home theater
system! We also added a fully functional remote control. When we say
that these speakers give you studio quality sound, it is more than true!
These are literally the same speakers we sell for studios.
These speakers are bi-amped. What this means is that there is a separate
amp for the highs and a separate amp for the lows! Each speaker has 500
watts peak output power and 125 watts RMS giving you a total of 1000
watts peak and 250 watts RMS per pair. We spent a lot of time developing
the most premium speakers we ever built! I am very excited
to talk to you guys about what we did to make these speakers sound as
good as they do. If you are an audiophile you will find what we did to
be quite amazing. Keep in mind, the only reason our price point is not
300 % higher is because you are buying manufacturer direct. We are one
of the leading speaker manufacturers in the USA, and we have a state of
the art manufacturing process. There is a lot to talk about so I will
break it down into sections.
Description of the enclosure:
We chose a wooden enclosure as opposed to a plastic enclosure.
Professional studios are made of wood for a reason. The sound
characteristics of high quality wood are better than plastic. We only
use the highest quality MDF wood. We do not bother with cheap particle
board material when we want to make the best speakers. The thickness is
0.5” around and the front board is a full 1” thick to give you the best
sound quality possible. The enclosure is built with the perfect amount
of air space to maximize sound quality.
We believe speakers should enhance the look of a room. We make these
speakers in 3 beautiful finishes. Painted black, painted white, and wood
finish. We use “baking paint” made for wood surfaces. It is long
lasting and the best paint for speakers! We went with a beautiful finish
that is mostly matte with a slight shine to it. Our designers spent
countless hours on the color to make sure it is not only beautiful but
elegant as well to improve the appearance of your room. We kept all the
controls on the back of the speaker, which will keep the speaker looking
very modern and elegant. The rear port is built to perfect spec to
enhance the sound. The tweeter has a curved front bezel to make the
highs crystal clear and distortion free.
Amplifier and Speaker Components Details:
To get the most efficiency we use a class “D” amplifier. We use the best
quality components from the most reputable circuit manufacturers in the
world in order to produce crystal clear sound. Most brands do not like
to reveal what’s in the guts of the speaker. We feel differently. We
want you to know what is inside so you realize how good of a value we
are offering and also so that you can understand how good these really
are. We use ADAU 1701 for audio processing and TPA3116 for
amplification. These are both known to be best in class circuit designs.
These components are amazing and allow us to adjust the sound via soft
programing on a computer during the design stage to get the perfect
sound. ADI and TI are the names of the makers of these IC’s. Most people
do not know brand names that make circuits; but these are the most
famous and reliable in the industry. Only very high end manufacturers
like us use these components."
For highs, we use Ferro fluid enhanced 1" neodymium silk dome
tweeters with metal grill protection. If you are an audiophile I am sure
you have tested and love the sound of silk dome tweeters. The neo
magnet is strong and can handle a lot of heat. This enabled us to beef
up the amplifier power without worrying about melting and blowing the
tweeter. The highs sound incredible! I cannot wait for you all
to hear it in person, because I cannot describe how good these sound!
You really need to listen to them in person.
We use an 8” woofer. This will out-perform a 5” woofer any day! The bass
sounds amazing! Very clear and punchy! The woofer has an
injection molded polypropylene cone. This is an engineered type of
plastic that is used on many speakers today. It is strong and puts out great sound. The rubber woofer surrounds increase sound quality and
eliminate unwanted distortions. They sound better than foam surrounds in
my opinion, which is why we went with rubber. The computer optimized
electronic crossover network supplies amazing sounding highs, lows, and
mids. Basically it filters out unwanted frequencies from each component
so that each speaker plays the right frequencies so that the speaker can
go loud without distorting. We use very high-grade crossover filters in
our speakers. The specially wounded voice coils produce accurate
response along the entire frequency spectrum. We developed the speakers
with the most optimized magnet structure, cone, and cabinet space with
the goal of reproducing the sound to play back exactly the way it was
recorded!
Added benefits:
The rear-firing port is shaped and designed by sound engineers to reduce
port turbulence and deliver distortion free top sound quality!Our
factory uses the latest Precision Glue Machine (Over 500 meter Tunnel
Oven). You may be asking yourself why am I talking about glue? Well, actually, the
glue on speakers is of the utmost importance. If the glue does not hold
up, the speaker will malfunction and blow.
Video of RHTSB:
The Rockville RHTSB high performance wood speaker stands are designed with appearance, performance, and quality in mind. These stands are perfect for Bookshelf speakers, surround sound speakers and even studio monitors!
Our stands are finished with premium furniture-grade paint that will not crack, chip, or peel. They will look great in your living room, family room, den, or even studio. These stands are constructed from high quality medium density fiber core to minimize resonance. Unlike our competitors who use particle board we use a higher quality wood in the construction of our stands.
With the included brass and rubber spikes as well as the included EVA speaker isolation pads you can feel confident that your speakers will be sturdy and perform optimally no matter what floor surface they are on.
In addition to appearance and quality we also made sure to focus on performance. The height of these stands are 36”. The reason we chose this specific height is that after testing stands at other heights we noticed this height was optimal for listening. In addition to performance we also would like to note that at 36” these stands look gorgeous! The included isolation pads not only provide a no-slip surface but help your speakers achieve superior acoustic quality.
Another really cool feature I would like to mention is the empty body design. By adding sand to the body of the stand you can increase the weight if you so choose. The load capacity of these stands are 60 lbs. Most other stands on the market have a maximum load capacity of 20 lbs. which really is not enough for a lot of speakers on the market. These stands are sturdy, built well, look great, and out-perform the competition so buy with confidence!
Includes:
- 8 Isolation pads
- 8 Brass spikes
- 8 Rubber spikes
- 4 Cable clips
- 4 Cable ties
- 16 Screws
Features:
- (2) Rockville RHTSB 36" Inch Bookshelf Speaker Stands Surround Sound Home Theater
- Pair Rockville RHTSB high performance wood speaker stands
- Finished with premium furniture-grade paint that will not crack, chip, or peel.
- Made from high quality medium density fiber core to minimize resonance
- Brass & Rubber spikes add stability to any floor surface
- Isolation pads create a no-slip surface as well as improve acoustical performance
- Empty body design allows you to add sand in order to increase the weight of the stands if needed
- 60 lbs. load capacity allows you to use a heavier speaker without compromising stability.
Specifications:
- Stands Height: 36"
- Base plate size: 11.8" 9.25"
- Top Platform size 1: 9.25" 7.28" (For smaller size speakers)
- Top Platform size 2: 9.25" 11.8"? (For larger size speakers up to 8")
- Item Load weight capacity: 60 lbs.
- Item weight per pair 25 lbs.
- Shipping weight 29 lbs.
- Color: Black
- Shipping dimensions 36” x 11.4” x 9.25”
- Product dimension 11.8” x 9.25” x 36”
- UPC:
- 613815875680