- (1) Focusrite Clarett OctoPre 8-Channel 24-bit /192kHz Studio Recording Mic Pre-Amp
- (1) Rockville RCM SR Studio/Recording Condenser Microphone Mic w/ Samsung Capacitors
- (1) Rockville ROCKSHIELD 3 Large Studio Mic Isolation Shield with Sound Dampening Foam
Authorized Focusrite Dealer!
Video of CLARETT-OCTOPRE:
Description:
Between October 1st, 2020 and December 31,2020, Focusrite gives you The Hitmaker Expansion: Antares Auto-Tune® Access, Relab LX480 Essentials, and XLN Addictive Focusrite Special, for free! Register you can new Clarett on Focurite.com to access The Hitmaker Expansion.
10-20 to 12-31-20 Get The Hitmaker Expansion Free !
8 In. 8 Out. Over ADAT.
Whatever you record, however you work, there will come the day that you need more inputs. Clarett OctoPre gives you eight - and eight outputs too - that you can use to extend the capabilities of your Clarett Thunderbolt audio interface - or any other interface fitted with ADAT optical inputs and outputs.
Eight Clarett Mic Pres with extra ‘Air’
The mic pres have been designed specifically for the Clarett range, with plenty of gain, yet low noise and distortion - and great sound quality. They include a special “Air” feature that switches in an analogue model of the classic transformer-based Focusrite ISA mic pre, switching the impedance of the preamp to that of the original ISA, and enabling a ‘transformer resonance effect’, giving your microphone recordings the air and clarity of an ISA transformer-based mic pre recording. In addition, the mic pres have plenty of headroom and are ideal for recording drums and other extreme level sources.
Mic, line and instrument inputs
The front panel includes dual instrument inputs featuring extra headroom to handle the loudest pickup, while the rear panel includes universal XLR/jack connectors for the remaining auto-switching mic/line inputs. In addition, each input has its own switched insert point for single-cable connection of compression, equalisation and other outboard analogue processing - with hard-wired relay bypass so you can leave outboard gear or a patchbay connected ready to access at the press of a button.
In addition to providing eight mic pres with 24-bit, 192kHz A-D conversion, the Clarett OctoPre offers D-A conversion of up to eight ADAT digital channels feeding 25-pin DSUB rear-panel analogue outputs, making it useful for mixing as well as tracking. The line outputs can optionally provide line level output feeds from the mic pres - useful for feeding a live console, for example, while recording the digital outputs. Aside from the insert point, the Clarett OctoPre is balanced end to end for exceptional noise immunity.
Precision Digital Conversion
There's no point in having the superb-quality mic preamps in the Clarett OctoPre without equally superb digital conversion to back them up. Focusrite has been making digital audio converters almost as long as mic preamps, and those in the Clarett OctoPre ensure that you maintain the highest possible quality getting your music in and out of your DAW. The Clarett OctoPre's precision 24-bit converters operate at standard sample rates all the way up to 192kHz - ideal for hi-res audio - with up to 118dB (A-D) /119dB (D-A) dynamic range. Clarett OctoPre also includes both internal and external clocking with Word Clock I/O and JetPLL(TM) jitter elimination.
Included:
- Softube Time & Tone Bundle is included as a free download
- Red 2 & 3 Plug-In Suite is included as a free download
Features:
- Focusrite Clarett OctoPre 8-Channel 24-bit /192kHz Studio Recording Mic Pre-Amp
- Supported Sample Rates: 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz
- Microphone Inputs:
- Frequency Response: 20 Hz - 35 kHz ±0.1 dB
- Dynamic Range (Without Insert): 118 dB (A-weighted)
- Dynamic Range (With Insert): 115 dB (A-Weighted)
- THD+N: 0.001%
- Noise EIN: –128 dBu (A-Weighted)
- Maximum input level: +18 dBu ±0.5 dB
- Gain Range: 57dB
- Line Inputs:
- Frequency Response: 20 Hz - 35 kHz ±0.1 dB
- Dynamic Range (Without Insert): 117 dB (A-weighted)
- Dynamic Range (With Insert): 115 dB (A-Weighted)
- THD+N: 0.001%
- Maximum input level: +26 dBU ±0.5 dB
- Gain Range: 57dB
- Instrument Inputs:
- Frequency Response: 20 Hz – 35 kHz ± 0.1 dB
- Dynamic Range (Without Insert): 116 dB (A-weighted)
- Dynamic Range (With Insert): 114 dB (A-Weighted)
- THD+N: 0.001%
- Maximum input level: +14dBu ±0.5 dB
- Gain Range: 57dB
- Line Outputs:
- Dynamic Range (Line Outputs): 118 dB (A-Weighted)
- Maximum Output Level (0 dBFS): +16 dBu, balanced
- THD+N: 0.0007%
How to Setup a Rockville Condenser Microphone with Your Computer:
How to set up your RCM-SR:
Video of RCM SR :
What's in the Box:
- (22 gauge, 10 feet) XLR to XLR Cable - To connect to the phantom power input on your mixer or interface
- (22 gauge, 10 feet) 3.5mm to XLR Cable - To connect the microphone to your computer
- Metal Shock Mount
- Large Wind-Screen/Pop-Filter
- Owner’s Manual
- Warranty Card
Description of RCM SR:
Introducing, the Rockville RCM SR, our newest high-quality, professional studio/recording condenser microphone! With it's large diaphragm it provides smooth, natural sound and low noise, it also delivers great bass, mids, and highs on all of your recordings. This microphone is very sensitive giving you the best possible sound! In addition, it includes a 25mm cartridge that allows for a bigger pickup area. The cartridge is the most important aspect that determines the sound quality, and the RCM SR has one of the best quality cartridges available for any microphone under $150. This microphone sounds better than other name brand microphones that cost twice as much!
This microphone has two capacitors (22µ50V and 47µ16V). We use Samsung capacitors from Korea, which are the highest quality capacitors on the market. These are important to help stabilize the voltage so that your recordings are consistent throughout, even if there are sudden changes in the volume or frequency ranges.
The body of the microphone is made of an aluminum metal. The super strong construction prevents noises from shocks and vibrations. This is especially important when recording loud music including drums and bass. The microphone head is made of strong, high quality steel and features a one-piece microphone head design. Most microphones will have a microphone head that is 2 pieces glued together. Our one-piece microphone head ensures longer life, and better durability. In addition, it helps to eliminate unwanted vibrations that may occur. We compared this microphone to the 3 most famous brands of microphones and the RCM SR outperformed similar microphones that sell for over double the price!
Features:
- Rockville RCM SR Studio/Recording Condenser Microphone Mic w/ Samsung Capacitors
- Best Applications: Home-Studio, Recording Studio, Broadcasting, Podcasts, Live Performances, and much more!
- Large diaphragm for smooth, natural sound and low noise
- 25mm Large Cartridge - Allows For Bigger Pickup Area
- Two Large Capacitors: 22µ50V and 47µ16V
- Large Diaphragm - Provides Smooth Natural Sound, and Great Bass, Mids, & Highs
- High SPL Handling and Wide Dynamic Range
- Cardioid Polar Pattern Reduces Pickup of Sounds From Sides and Rear, Reducing Unwanted Noise
- Element: Fixed-charge back plate, permanently polarized condenser
- Microphone Head is Made of High Quality Steel featuring One-Piece Head Design
- Microphone Body Is Made of Special Zinc Metal Material - Prevents Noise From Shock and Vibrations
- Frequency Response: 20Hz - 20 kHz
- Open Circuit Sensitivity: -30dB ±2dB (0dB = 1V/Pa @ 1 kHz)
- Impedance: 100 Ohms
- Equivalent Noise Level: = 23 dB A (IEC581-5)
- Maximum Input Sound Level: 142dB SPL (THD = 1.0% @ 1 kHz)
- Electrical Current: ?500Ua
- Noise: 20dB SPL
- Dynamic Range (Typical): 124 dB, 1 kHz @ Max SPL
- Signal-to-Noise Ratio: 74 dB, 1 kHz @ 1 Pa
- PCB Layout: Surface Mount
- Fixed Crossover Filter Cutoff Frequency: 50Hz - 16 kHz
- Power Requirements: 48V DC Phantom Power
- Output Connector: 3-Pin XLR
- Product Weight: 0.74 Lbs
- Product Height: 7.44" inches
- Shipping Weight: 3.32 Lbs
- Shipping Dimensions: 13.98" x 7.87" x 3.15"
How to Set Up Your RockShield 3:
Video of ROCKSHIELD 3:
Includes:
- 5 Panel Mic Isolation Shield
- Hardware to Mount unit to your mic stand
- 5/8” Mic Adapter
- Desktop mic attachment
RockShield 3
Rockville’s Rockshield 3 studio microphone isolation shield is the latest addition to our ever growing line of Pro Audio studio accessories. Featuring 2-inch-thick high density acoustic foam, the RockShield 3 keeps unwanted outside audio waves and vibrations from affecting your recordings. By creating an acoustic boundary around the microphone, vocal audio flow is improved. Your voice is redirected to the microphone, meanwhile room reflections are prevented from directly entering the recording area. The end result is you will achieve a crisper and cleaner sound. This shield can be mounted to compatible microphone stands or used in a fixed location, like a countertop/tabletop. Easy installation and studio quality performance will quickly make the Rockshield 3 your go-to sound dampening isolation shield.
Features:
- RockShield 3 Pro Audio Acoustic Microphone Isolation Shield
- Keeps Excessive Room Ambience and Off Axis Sound from interfering with your microphone when recording acoustic and vocal tracks
- Isolates Directional Microphones from Off Axis Coloration
- Limits External Bleed from Unintended Sound Sources
- Features a 2-Inch-Thick High Density Pyramid Acoustic Foam front and a vented metal back plate for the Best Noise Reflection Reduction
- Can be used in fixed location
- Stand mountable
- Provides Vocal Booth Style Recordings with Minimal Footprint
- Professional Studio-Grade
- Rugged Finish Makes This Easy to Transport
- Tri-Pod Foot Design for Stability on Flat Surfaces
- 3/8 Die-Cast Metal Threads
- Mic Stand with 5/8 Adapter
- The shield is made of pure high-grade steel
- Number of Panels: 5 pcs
- Dimensions Each Panel: 6.3'' x 12.2'' inch
- Dimensions Assembled Unit: 17.5'' x 16.1'' x 7'' inch
- UPC:
- 613815973300
