Package Includes:

• (1) AKG C636 Handheld Condenser Microphone Live Sound Vocal Mic
• (1) Rockville RockMix 4 Channel Mic/Instrument Pro Recording Mixer+USB Interface/EQ
• (1) Rockville RVMIC3 Tripod Microphone Stand With Quick Release Hand Clutch & Boom
• (1) Rockville RCXFM20E-B 20 Foot Female to Male XLR Mic Cable Black 100% Copper

---

What's in the Box:

• 1 x C636 Microphone
• 1 x SA61 Stand Adaptor
• 1 x Microphone Bag

Features:

Be aggressive, the C636 can take it

If you’ve ever tried to bring a studio mic on stage, you know they’re too delicate to stand up to the task. The C636 mic’s proprietary double shock suspension system greatly reduces handling noise, even during the most energetic on-stage performances. Its capsule sits on a highly absorbent rubber bearing, eliminating any structure-based noise, while an adjustable balancing network cancels vibrations over a wide frequency range. In addition, a substantial brass layer below the capsule serves as a counterweight that increases stability and delivers cleaner acoustics.

A new approach to broad-spectrum feedback rejection

The C636 essentially eliminates feedback by combining a uniform cardioid polar pattern throughout the entire frequency spectrum with a specially designed suspension and grille for the capsule. This unique approach to housing the capsule avoids unwanted sound reflections on the back of the capsule from stage sound sources, the most common cause of feedback in other microphones.

Step on stage with a studio legend

Step on stage with a studio legend. The new AKG C636 is the legendary C535 updated for today’s rigorous live performance requirements. Offering the pure studio sound you’ve grown to love, housed in a worry-free durable housing, you can now focus on your vocal performance—not on the performance of your microphone.

Spend a few minutes with the AKG C636, and you’ll realize you’ve never held a mic like this. Its proprietary double shock suspension system provides unparalleled rejection of handling noise. And the C636 doubles­-down on keeping your performance flawless by incorporating a state-of-the-­art, multi-­layer pop noise rejection system that eliminates plosives and a consistent, cardioid polar pattern that eliminates feedback.

Made with hand-­selected components and manually tuned for a pure transparent tone, the new C636 retains the spirit of the classic AKG C535 condenser microphone, while being updated to meet the demands of today’s top vocal performers.

Specifications:

• Type: 3/4” Back electret condenser
• Polar Pattern: Cardioid
• Sensitivity: 5.6 mV/Pa
• Audio frequency bandwidth: 20 - 20000 Hz
• Electrical impedance: 200 Ohms
• Recommended load impedance: 2000 Ohms
• Equivalent noise level: 20 dB-A
• Signal to Noise: 74 dB-A
• Max. SPL for 1 % THD: 150 dB
• Operating temperature range: -10 to 60 Celsius (14 °F - 140 °F)
• Bass cut filter: 80 Hz, 12 dB/octave

Powering Interface

• Voltage: 48 V
• Current: 4 mA

Dimensions

• Length: 185 mm
• Diameter: 51 mm
• Net Weight: 312 g

Design

• Body: metal
• Finish: matte black

Audio Output

• Type: Balanced XLR
• Gender: Male
• Contacts: 3-pin

Application

• Live Vocal: Yes

Instrument

• Vocals: Yes

---

Video of ROCKMIX 4:

How to Set Up Your RockMix 4:

What's in the Box:

• Mixer with USB recording interface
• USB cable
• USB power adapter
• 4 Non-slip rubber feet pads
• Owner manual and warranty card

Recommended Applications:

• Live Stream/recording/podcasting/broadcasting, zoom/conference meetings, etc
• 2 person live stream or recording with (2) mics and a stereo instrument
• 3 person band with a singer, a guitar player, and a keyboard player

Features:

• Rockville RockMix 4 Channel Mic+Instrument Pro Recording Mixer with USB Recording Interface
• Bit Depth: 16 bit
• Sample Rate: 48kHz
• Assignable USB Record Source
• Switchable +48v Phantom Power on channels 1 & 2 for use with condenser microphones
• Channel 1 and Channel 2: XLR and ¼” TRS combo input jacks
• Channel 2: mic/instrument level switchable allowing you to connect a mic, instrument, or any other audio device
• Stereo channel 3 and 4 have ¼” inputs (balanced or unbalanced)
• CH3 & CH4 with GAIN switch and LEVEL control
• Independent Level Controls for Main and Headphone/Monitor Outputs
• Integrated Plug-and-Play USB Audio Interface for Mac & PC
• Operates on USB BUS Power or 5V DC External Power Supply (Included)
• 3.5mm aux input jack for sound effects or background music
• Low power consumption means you can power the mixer from the USB of your laptop or by plugging it into an outlet or through a standard 5V powerbank
• Super mini 4-channel mixing console designed for home studio recordings or live broadcast streaming
• (2) headphone outputs (¼” and 3.5mm)
• ¼-inch TRS Stereo Output
• ¼” Stereo Monitor Output
• Additional 3.5mm mic input allow you to connect an additional microphone to channel 1
• Channels 1 and 2 each have a 2-band EQ and Pan controls and gain controls
• TO PC slide switch allows you to select which channels get sent to your computer (DRY CH1-2/ INPUT MIX/ LOOPBACK)
• Clip LED indicators
• Monitor mute button
• Monitor/headphone level control knob
• Main mix level control knob
• No external drivers are needed for mac or PC

Specifications:

Input Connections:

• XLR & ¼-inch Balanced Combi-jack (CH 1 & CH2)
• ¼-inch TRS Balanced (CH3 & CH4)
• 1/8-inch TRS Aux/MP3, 1/8-inch Headset Mic

Output Connections:

• ¼-inch TRS Balanced Main Mix Outputs
• ¼-inch TRS Stereo Output & Monitor Outputs
• 1/8th-inch Headset Output
• CH1 XLR: 1.5mV/2.2k ohm
• CH2 XLR: 2.5mV/2.2k ohm
• CH1 Jack: 10mV/12k ohm(line)
• CH2 Jack: 15mV/240k ohm
• CH3/4: 550mV/22Kohm
• Signal to Noise Ratio: > 90dB Typical (Ref 0dBu)
• Maximum Input Level: +8dBu (Mic), +16dBu (1/4-inch Input)
• Maximum Output Level: +15dBu Main Mix Outputs
• Maximum Gain >55dB (Mic), >37dB (Instrument), 5dB (CH3 & CH4)
• USB Computer Interface USB Class Compliant plug-and-play Mac / PC Interface
• AUX IN: 280mV/10Kohm
• Output Level: main mix out--max.6.5V, stereo out-- 1.0V, phone/monitor out-- max. 6.5V
• Frequency Range: 10-33000Hz, +/-3dB
• THD: <= 0.05%
• Low Range: ±15dB/80Hz
• High Range: ±15dB/12kHz
• Headphone: Impedance: >=8 ohm
• Phantom Power: +48V
• Power Supply: USB 5V 500mA  Via USB or 5VDC @ 500mA
• Operating System: Windows 2000/XP/7/Vista or higher; Mac OS 9.1/ OS X or higher
• Item Size: 190*130 *47mm / 7.48 * 5.11 * 1.85in
• Item Weight: 716g / 1.58lbs
• Package Size: 24 * 17.5 * 10cm / 9.4 * 6.9 * 3.9in
• Package Weight: 1015g / 2.24lbs

Owner’s Manual

---

How to Set Up Your RVMIC3:

Video of RVMIC3:

Features:

• Rockville RVMIC3 Professional Tripod Microphone Stand With Quick Release Hand Clutch and Boom
• One-hand adjusting using the hand-clutch system (no need to turn knobs to adjust!)
• This mic stand is the easiest and quickest to adjust on the market!
• Leg joint is made out of aluminum (almost all other brands use plastic)
• The stand tubes are 25 mm thick for the bottom tube, and 18mm for the top tube. This is about 50 % thicker than almost all other brands on the market, making this one of the sturdiest stands in the world
• Steel & Nylon Construction
• Virtually Unbreakable (under normal use)
• Small Cable Guiding Clips for running cables along the stand
• Black Color
• Adjustable Height Range: 43-70 inches
• Boom: 30 inches
• Leg Diameter: 0.75 inch
• Top Tube Diameter: 0.6 inches
• Lower Tube Diameter: 0.6 inches
• Boom tube size: 0.79 - 0.39 inch

---

Video of RCXFM20E-B:

Description:

All Rockville pro audio cables are made with 100% copper which boosts the efficiency of the cable. There is nothing better than 100% copper. Most of the cheaper cables on the market do not use 100% copper, instead they make their cables with CCA (Copper Clad Aluminum). CCA cables do not perform on the level that 100% copper cables perform at. CCA will not conduct signals efficiently. A 12 gauge CCA cable will not even perform as well as a 14 gauge 100% pure copper cable, which will in turn, affect the performance and longevity of your equipment. If you find cables on the market that do not mention the copper content, there is a good chance that they are selling you a cheaper cable that is CCA and not 100% copper. Rockville pays an inspection company to oversee the manufacturing of the product to ensure that we provide a 100% Oxygen Free Copper Cable (OFC). Our OFC cables are less prone to oxidation, and will provide maximum signal transfer.

The other important factor of a cable is the shielding. Most of the good brands on the market have about 85% shielding coverage, so we decided to take our shielding a step further. Rockville cables are shielded with a tight copper mesh, covering 90% of the cable! The high percentage of coverage increases the ability to absorb the Electromagnetic Interference (EMI) and Radio Frequency Interference (RFI) that suppresses signal and degrades the performance of equipment. Rockville Cable’s copper shielding provides great flexibility, maintains a durable structural integrity, while decreasing signal interference ensuring enhanced signal clarity with every use.

Features:

• Rockville RCXFM20E-B Black 20 Foot Nickel Plated Female to Male XLR Microphone Cable
• XLR Connectors with Internal Strain Relief for Rugged Reliability
• 100% Copper Conductors for Enhanced Signal Clarity
• 90% OFC Spiral Shield for Effective EMI and RFI Rejection and Flexibility
• Length: 20 Ft
• Color: Black