- (1) Blue Bottle Rocket Stage 1 Studio Condenser Microphone w/B8 Capsule+Shockmount
- (1) AKG K175 On-Ear Closed-Back Foldable Recording Monitoring Studio Headphones
- (1) Rockville ROCKSHIELD 3 Large Studio Mic Isolation Shield w/Sound Dampening Foam
Authorized Blue Dealer!
Description of Bottle Rocket Stage 1:
LET YOUR SOUND TAKE FLIGHT
Like its sibling the Bottle, Bottle Rocket Stage One breaks away from traditional microphones to propel your creativity to new sonic heights. The hand-tuned B8 capsule provides flexibility for a variety of recording scenarios, while our acclaimed interchangeable Bottle Caps (sold separately) enable you to create virtually any mic imaginable and capture any sound source.
Ready for Launch
Bottle Rocket Stage One includes the B8 large-diaphragm cardioid condenser Bottle Cap. Its mission: total recording versatility. The B8 capsule is a hotrod version of one of the world’s most legendary condenser capsules. But unlike it’s predecessor, which was lacking in mids, B8 is tuned for a lush midrange with a gorgeous lift around 5kHz and a smooth cut around 8kHz. It’s perfect for capturing a wide variety of sound sources with stunning detail—including lead vocals, electric and acoustic guitars, drums, percussion, horns and strings.
All the Right Stuff
Bottle Rocket Stage One is designed and hand-built in the USA for a lifetime of use. It features very low self-noise (<7.5dB), exceptionally high output (+12dBV), and a proprietary transformerless Class A FET circuit that delivers the most accurate, noise-free signal available. It even comes with a spider mount and flight case.
Interchangeable Capsules
Bottle Caps are a system of interchangeable capsules that provide a variety of tonal ranges, characters, diaphragm sizes and polar patterns for total recording versatility. Big vocal sounds. Vintage and modern sounds. Delicate, accurate reproduction. Different patterns. All in a single microphone. And the quick-change connection makes experimenting with new sounds fast and easy.
All in the Family
Blue’s Interchangeable Capsule family embodies our commitment to being unique, bold, and creative—just like you. Choose from the soul-satisfying warmth of the Bottle tube mic or the exacting clarity of the Bottle Rocket Stage One FET condenser. Work with a single iconic capsule or build out your mic collection with one of our curated 4-capsule lockers. And for even more sonic possibility—the full series Bottle Caps offers limitless tones. With one mic and so many interchangeable capsules, you can perfectly match your sound source with the correct mic every time you hit ‘record’.
Features:
- Blue Bottle Rocket Stage 1 Studio Condenser Microphone with B8 Capsule and Shock Mount
- Crystal-clear sound quality and superb detail with legendary B8 Bottle Cap
- Compatible with all interchangeable Bottle Caps
- Low self-noise (<7.5dB)and high output level (+12dBV)
- Class A Discrete solid-state electronics
- Includes shock mount and wood storage box
- TECHNICAL SPECIFICATIONS:
- Transducer Type: Pressure Gradient or Pure Pressure (depending on capsule)
- Polar Patterns: Cardioid, Omnidirectional, Figure of 8 (depending on capsule)
- Frequency Response: 20Hz – 20 kHz
- Sensitivity: 27 mV/Pa (+/- 10mV depending on capsule) at 1kHz (1Pa = 94dB SPL)
- Output Impedance: 50 Ohms
- Rate Load Impedance: Not less than 1 kOhms
- Noise Level A-Weighted: Not more than 7.5dBV – 14dBV (IEC 651) (depending on capsule)
- Maximum Output: +12dBV = 3.1 Vrms (2.5kOhms, 1% THD)
- Maximum SPL: 138dB SPL (2.5kOhms, 0.5% THD)
- Dynamic Range: 130 dB (@2.5kOhms)
- Power Requirement: +48V DC Phantom Power (IEC 268-15) (+35V min)
- Current Draw: 1.8mA (typical AI+48V)
Description of K175:
The K175 offers best-in-class frequency response, delivering unrivaled clarity and detail, making it easy to hear subtle detail and to create mixes that translate well across different playback systems. Their superior sensitivity and low impedance offer maximum output before distortion, so you can use them even when playing music on lower-powered mobile devices.
Features:
- On-ear, foldable, Closed-Back design
- Largest in-class 40mm drivers, 32 Ohms
- Frequency range 18 Hz – 26 kHz, 114 dB SPL
- Detachable coiled cable with replaceable ear pads
- Slow-retention foam ear pads for comfort and isolation
How to Set Up Your RockShield 3:
Includes:
- 5 Panel Mic Isolation Shield
- Hardware to Mount unit to your mic stand
- 5/8” Mic Adapter
- Desktop mic attachment
RockShield 3
Rockville’s Rockshield 3 studio microphone isolation shield is the latest addition to our ever growing line of Pro Audio studio accessories. Featuring 2-inch-thick high density acoustic foam, the RockShield 3 keeps unwanted outside audio waves and vibrations from affecting your recordings. By creating an acoustic boundary around the microphone, vocal audio flow is improved. Your voice is redirected to the microphone, meanwhile room reflections are prevented from directly entering the recording area. The end result is you will achieve a crisper and cleaner sound. This shield can be mounted to compatible microphone stands or used in a fixed location, like a countertop/tabletop. Easy installation and studio quality performance will quickly make the Rockshield 3 your go-to sound dampening isolation shield.
Features:
- RockShield 3 Pro Audio Acoustic Microphone Isolation Shield
- Keeps Excessive Room Ambience and Off Axis Sound from interfering with your microphone when recording acoustic and vocal tracks
- Isolates Directional Microphones from Off Axis Coloration
- Limits External Bleed from Unintended Sound Sources
- Features a 2-Inch-Thick High Density Pyramid Acoustic Foam front and a vented metal back plate for the Best Noise Reflection Reduction
- Can be used in fixed location
- Stand mountable
- Provides Vocal Booth Style Recordings with Minimal Footprint
- Professional Studio-Grade
- Rugged Finish Makes This Easy to Transport
- Tri-Pod Foot Design for Stability on Flat Surfaces
- 3/8 Die-Cast Metal Threads
- Mic Stand with 5/8 Adapter
- The shield is made of pure high-grade steel
- Number of Panels: 5 pcs
- Dimensions Each Panel: 6.3'' x 12.2'' inch
- Dimensions Assembled Unit: 17.5'' x 16.1'' x 7'' inch
- UPC:
- 613815663454
