- (1) Audio Technica ATW-3212/C510EE1 3000 Wireless Handheld Microphone+Mic Receiver
- (1) DBX 231S Dual 31 Band Graphic Equalizer Pro Audio Rack Mount EQ + Low Cut Filter
- (4) Rockville RCXFM20E-B 20 Foot Nickel Plated Female to Male XLR Microphone Cable
Authorized Audio-Technica Dealer!
What’s In the Box:
- ATW-R3210 receiver
- ATW-T3202 handheld transmitter
- ATW-C510 cardioid dynamic microphone capsule
Description:
Providing easy setup, versatile operation
and rock-solid, richly detailed high-fidelity sound, Audio-Technica’s
fourth-generation 3000 Series wireless systems give users the power and
flexibility to operate within the congested UHF spectrum.
With a class-leading 60 MHz tuning range – more than twice that offered by the
previous versions – the new 3000 Series systems are available in frequency
bands – EE1 (530–590 MHz). Frequencies can be easily scanned and selected on the receiver and then
synced with the transmitter via IR sync functionality. The 3000 Series even lets
users set a backup frequency that can be quickly swapped by pressing the
transmitter’s multifunction button in the event of unexpected interference.
This system configuration features an ATW-R3210 receiver along with an ATW-T3202
handheld transmitter and an ATW-C510 interchangeable capsule. The ATW-T3202
comes with an ATW-C510 dynamic interchangeable cardioid capsule, and its
industry-standard thread allows for the use of Audio-Technica and other
compatible capsules. The transmitter features rugged, metal housings and is
powered by two AA batteries. Charging terminals on the transmitter work with the
ATW-CHG3 and networkable ATW-CHG3N smart charging docks (sold separately) to
recharge NiMH batteries. Antenna power is available for powered antennas and
other in-line RF devices. A ground-lift switch helps eliminate audible hum
caused by ground loops. The system features balanced and unbalanced audio output
jacks.
60 MHz Tuning Range
With a class-leading 60 MHz tuning range – more than twice that offered by the
previous versions – the new 3000 Series systems are available in frequency
bands – EE1 (530–590 MHz). Frequencies can be easily scanned and selected on the receiver and then
synced with the transmitter via IR sync functionality. The 3000 Series even lets
users set a backup frequency that can be quickly swapped by pressing the
transmitter’s multifunction button in the event of unexpected interference.
Interchangeable Cardioid Capsule
The ATW-T3202 comes with an ATW-C510
dynamic interchangeable cardioid capsule, and its industry-standard thread
allows for the use of Audio-Technica and other compatible capsules
Features:
- Extremely wide 60 MHz UHF tuning bandwidth for maximum versatility in an increasingly congested RF environment; available in frequency bands: EE1 (530–590 MHz).
- Unique multifunction button on the handheld transmitter can be used to switch to a backup frequency (on both transmitter and receiver) should interference be encountered
- True Diversity operation reduces dropouts
- Auto Squelch feature automatically adjusts squelch setting to maximize range while minimizing potential interference
- Frequency scan and IR sync functionality for ease of setup
- Dual-mode receiver display can switch between standard view or a performance view that highlights key metering
- Transmitter and receiver include OLED screens for optimal readout of key settings and alerts
- Handheld transmitter offers extremely low handling noise and includes an industry-standard thread mount for use with six interchangeable A-T microphone capsules, as well as other compatible capsules
- Charging terminals on transmitter work with optional ATW-CHG3 and ATW-CHG3N smart charging docks to recharge NiMH batteries
- Antenna power available for powered antennas and other in-line RF devices
- Ground-lift switch helps eliminate audible hum caused by ground loops
- Balanced and unbalanced audio output jacks
- ATW-C510 dynamic interchangeable cardioid capsule
Specifications:
Microphone | |
---|---|
Element | Dynamic |
Polar Pattern | Cardioid |
Frequency Response |
90 - 12000 Hz |
Impedance |
50 Ohms |
Weight |
129 g |
Dimensions |
78.5 mm long, 53.7 mm max. diameter |
Output Connector |
Interchangeable industry-standard thread |
Overall System | |
---|---|
Operating Frequencies | Band EE1: 530.000 to 589.975 MHz Please note that some frequency bands might not be available in your territory or could come with a limited tuning bandwidth / transmitting power due to local regulations. |
Minimum Frequency Step |
25 kHz |
Modulation Mode |
FM |
Maximum Deviation |
ATW-T3201: ±38 kHz (THD:10%) ATW-T3202: ±36 kHz (THD:10%) |
Simultaneous Use |
40 Channels per band* For assistance with multi-band operation or other frequency coordination issues, please contact your regional Audio-Technica customer service representitive. *Region and band dependent |
Frequency Response |
ATW-T3201: 31 Hz to 15500 Hz ATW-T3202: 25 Hz to 16700 Hz |
Operating Range |
100 m |
Dynamic Range |
ATW-T3201 Mic input: > 115 dB (A-weighted), typical ATW-T3201 Inst input: > 112dB (A-weighted), typical ATW-T3202: > 115 dB (A-weighted), typical |
Total Harmonic Distortion |
<1.0% (at 1 kHz, ±17.5 kHz deviation) |
Operating Temperature Range |
-5 ºC to +45 ºC |
Receiver | |
---|---|
Receiving System |
True Diversity |
Sensitivity |
20 dBuV at 60 dBA S/N ratio (50Ω termination) |
Maximum Output Level |
XLR / Balanced: +14 dBV 6.3 mm (¼"") / Unbalanced: +8 dBV |
Antenna Input |
BNC-type, 50 Ω |
Power Output |
12 V DC, 160 mA (combined) |
Power Supply | 100-240V AC (50/60 Hz) to 12V DC 1A (center positive) switched mode external power supply |
Dimensions |
210.0 mm x 191.0 mm x 43.4 mm (W x H x D) |
Weight |
1100 g, without accessories |
Accessories Included |
Two Flexible UHF antennas AC adapter (country dependent) Rack Mount Adaptors |
Handheld Transmitter | |
---|---|
RF Power Output |
High: 30 mW, Low: 10 mW (switchable), at 50 Ω |
Spurious Emissions |
Following Federal and National Regulations |
Microphone Element |
Interchangeable industry-standard thread |
Battery Type |
Two 1.5V AA, not included |
Battery Life |
High: 8.0 hours / Low: 9.0 hours (alkaline) High: 9.0 hours / Low: 9.5 hours (Ni-MH 1900mAh) Depending on battery type, usage and environmental conditions. |
Dimensions |
193.0 mm long, 37.0 mm maximum diameter |
Net Weight |
200 g |
Accessories Included | AT8456a Quiet-Flex™ stand clamp; ⅝"-27 male to ⅜"-16 female threaded screw adapte |
Advantages of buying from an authorized seller:
- Best prices - We sell all Audio-Technica Products at great prices
- Full Factory Warranty
- Lifetime Customer Service by Audio-Technica product experts
- Detailed information of all products
- Guaranteed legitimate and authentic merchandise
Please note: If you purchase Audio-Technica from an unauthorized seller then you are taking a big risk. You will not have any manufacturers warranty, and there is no guarantee that the item is authentic, brand new, or even working.
Description:
Exceptional sound and rugged reliability
When the pros need an EQ, they turn to dbx. With a proven track record that spans four decades, dbx® EQs are the industry standard for touring, studios, and audio installations. With the dbx heritage of revered pro EQs, the 231s meets the needs of the most demanding sound reinforcement environments, while offering the simplicity of straightforward controls.
The dbx 231s includes two 31-band channels of 1/3-octave equalization, ±12 dB input gain, switchable ±6 dB or ±12 dB boost/cut range, 20mm nonconductive sliders, an intuitive user interface, and output level metering. From its extended 10Hz to 50kHz frequency response and 112 dB dynamic range to the quality componentry and meticulous attention to detail, the 231s offers exceptional sound and rugged reliability that guarantees you will always sound your best.
Sure to find a home in the studio, on tour and with installed sound venues, the dbx 231s is destined to take its rightful place in the lineage of great dbx signal processors that are the professional's choice in signal processing. With such affordable quality, there's no longer any excuse for compromising your sound.
Features:
- Dual 31-band, 1/3-octave Constant Q frequency bands
- Switchable boost/cut ranges of ±6 or ±12 dB
- Front panel bypass switch
- ±12 dB input gain range
- 4-segment LED ladders for monitoring output levels
- XLR and TRS Inputs and Outputs
- Frequency Response of <10Hz to >50kHz
- Dynamic range of greater than 108dB
Specifications:
- Input Connectors: 1/4" TRS, female XLR (pin 2 hot)
- Input Type: Electronically balanced/unbalanced, RF filtered
- Input Impedance: Balanced 40k ohm, unbalanced 20k ohm
- Max Input: >+21dBu balanced or unbalanced
- CMRR: >40dB, typically >55dB at 1kHz
- Output Connectors: 1/4" TRS, male XLR (pin 2 hot)
- Output Type: Impedance-balanced/unbalanced, RF filtered
- Output Impedance: Balanced 100 ohm, unbalanced 50 ohm
- Max Output: >+21dBu balanced/unbalanced into 2k ohm or greater; >+18dBm
- balanced/unbalanced (into 600 ohm)
- Bandwidth: 20Hz to 20kHz, +0.5/-1dB
- Frequency Response: <10Hz to >50kHz, +0.5/-3dB
- Dynamic Range: Typically >112dB
- Signal to Noise Ratio: Typically >95dB
- THD+Noise: <0.003%
- Interchannel Crosstalk: <-90dB, 20Hz to 20kHz
- Bypass Switch: Bypasses the graphic equalizer section in the signal path
- Low cut Switch: Activates the 50Hz 12dB/octave high-pass filter
- Range Switch: Selects either +/- 6dB or +/-12dB slider boost/cut range
- Operating Voltage: 100-240VAC 50/60Hz
- Power Consumption: 15W
- Power Connector: IEC receptacle
- Unit Weight: 6.2 lbs.(2.81 kg)
- Shipping Weight: 7.9 lbs.(3.58kg)
- Dimensions: 3.5" (8.9cm) H x 6"(15.24cm) D x 19" (48.26cm) W
Video of RCXFM20E-B:
Description:
All Rockville pro audio cables are made with 100% copper which boosts the efficiency of the cable. There is nothing better than 100% copper. Most of the cheaper cables on the market do not use 100% copper, instead they make their cables with CCA (Copper Clad Aluminum). CCA cables do not perform on the level that 100% copper cables perform at. CCA will not conduct signals efficiently. A 12 gauge CCA cable will not even perform as well as a 14 gauge 100% pure copper cable, which will in turn, affect the performance and longevity of your equipment. If you find cables on the market that do not mention the copper content, there is a good chance that they are selling you a cheaper cable that is CCA and not 100% copper. Rockville pays an inspection company to oversee the manufacturing of the product to ensure that we provide a 100% Oxygen Free Copper Cable (OFC). Our OFC cables are less prone to oxidation, and will provide maximum signal transfer.
The other important factor of a cable is the shielding. Most of the good brands on the market have about 85% shielding coverage, so we decided to take our shielding a step further. Rockville cables are shielded with a tight copper mesh, covering 90% of the cable! The high percentage of coverage increases the ability to absorb the Electromagnetic Interference (EMI) and Radio Frequency Interference (RFI) that suppresses signal and degrades the performance of equipment. Rockville Cable’s copper shielding provides great flexibility, maintains a durable structural integrity, while decreasing signal interference ensuring enhanced signal clarity with every use.
Features:
- Rockville RCXFM20E-B 20 Foot Nickel Plated Female to Male XLR Microphone Cable
- XLR Connectors with Internal Strain Relief for Rugged Reliability
- 100% Copper Conductors for Enhanced Signal Clarity
- 90% OFC Spiral Shield for Effective EMI and RFI Rejection and Flexibility
- Length: 20 Ft
- Color: Black
- UPC:
- 613817183066