• (1) Kicker 10" Car Subwoofer
• (1) Rockville Vented Solo Baric L7 L5 L3 Sub Box Enclosure S10L7 S10L3 S10L5
• (1) Kicker 43CXA6001 CXA600.1 600 Watt RMS Mono Class D Car Audio Amplifier Amp
• (1) Rockville RWK41 4 Gauge Complete Wire Kit w/RCA's
• 10 Drywall Wood Screws (Wood screws are the type of screws; the screws are actually made of metal)
• 12 Feet of 14 AWG Blue Speaker Wire
• 2 Spade Terminals

Authorized Kicker Dealer!

Description for Kicker Sub:

Square Matters
The Solo-Baric's cutting-edge, square-sub design means more cone area, more air displacement and more volume than a round woofer.

Features:

• Kicker L7S104 10" 1200 Watt Solobaric L7S Car Subwoofer Solo-Baric 44L7S10-4
• Dual Four-Ohm Voice Coils
• Injection-Molded Polypropylene Cone
• Patented Corner Ribs Minimize Distortion
• SoloKon™ 360-Degree Back Bracing
• Ribbed Santoprene Surround With Blue Surround Stitching
• UniPlate&trde; Back Plate And Pole Piece, Plus Perimeter Venting For Excellent Thermal Management
• Thick Tinsel Leads
• Large Ceramic Magnet
• Cast Aluminum Basket
• Satin-Nickel Plated, Spring-Loaded Speaker Terminals
• The Solo-Baric L7S 10-Inch Subwoofer works best with a sealed or ported enclosure and 600 watts of recommended power. See below for more details.

Specifications:

• Size: 10" (25.4 cm)
  
• Impedance: 4 Ohms DVC
  
• Max Rec Amplifier Power: 1200 Watts Peak / 600 Watts RMS
  
• Sensitivity: 86.8 dB 1w/1m
  
• Frequency Response: 24Hz - 100Hz
  
• Mounting Depth: 6-1/4" (15.9 cm)
  
• Mounting Cutout, Square: 9-5/16" (23.7 cm)
  
• Min Rec Sealed Box Volume: 0.66 cu. ft. (18.7 liters)
  
• Max Rec Sealed Box Volume: 1.0 cu. ft. (28.3 liters)
  
• Min Rec Vented Box Volume: 1.25 cu. ft. (35.4 liters)
  
• Max Rec Vented Box Volume: 2.25 cu. ft. (63.8 liters)

Description of 43CXA6001:

The CX 600.1 Mono Amplifier is built for big bass in a sleek, yet affordable package. Using a Class D power plant and FIT™ (Failsafe Integration Technology) for superior dependability, this amp features a variable bass boost with KickEQ™, giving you as much as a 12dB of extra bump with a simple turn of the optional CXRC Remote Bass Controller. Use the full range outputs to expand your system with other bass amps, or a full range amp to complete your system.

CX Series amps reach massive power levels thanks to an optimized circuit layout and the highest-grade internal components available. Highly efficient heat sinks keep the amp cool with a sophisticated new look. Mono amps offer an optional remote level control to adjust your bass right from the dash. This CX amplifier delivers as much as 600 watts into one channel.

Features:

• Kicker 43CXA6001 600 Watt RMS Class D Car Amplifier
  
• 2-Ohm Stable Monoblock Amplifier
  
• RMS Power Rating:
  .....4 ohms: 300 watts x 1 chan.
  .....2 ohms: 600 watts x 1 chan.
  
• Total power output: 1200 watts
  
• Pulse Width Modulated MOSFET power supply
  
• Kicker CXARC wired remote bass level control available and sold separately
  
• LED power (green) and protect (red) indicators
  
• Soft start turn-on
  
• Mono channel operation
  
• Speaker-level (high-level) inputs via RCA (requires Kicker KISL, available and sold separately)
  
• Preamp RCA outputs to daisy chain multiple amps
  
• 3-way protection circuitry (thermal, overload, and speaker short protection)
  
• Dual speaker terminals simplify the hookup of multiple speakers
• 4-gauge power and ground leads and an 80-amp fuse recommended (Not include in this amplifier)
  
• Input sensitivity: Low level: 125mV-5V ; High level: 250mV-10V
  
• Frequency Response: 25 - 200Hz
  
• Signal to Noise Ration: >95dB
  
• Variable Low-Pass Crossover: 50 - 200Hz 12dB/octave
  
• Variable Bass Boost: 0 to +12 dB bass boost at 40 Hz
  
• Fixed Subsonic Filter @ 25hz, 24db/octave
  
• Dimensions: 7-3/16"W x 8-1/8"L x 2-3/8"H

Video of RWK41:

Unboxing Video for RWK41:

Description:

The Rockville RWK41 4 AWG (American Wire Gauge) amp kit has the following differences over other amp kits on the market at this price point.

1. Our RCA cables are 100 % copper. These are top of the line RCA cables

2. BetterResistance: The only thing that really matters with wires is the resistancerating. This is a measurement of conductivity and how much signal is loss perfoot of wire. Since Rockville wiresare made with around 3 times as much copper as any other wire at this pricepoint, these wires had a much better resistance rating which means they willtransfer more power to your amps than the other brands.

3. We do not cheat you on the thickness of the wire. These are standard American wire gauge thickness. This is another reason our conductivity is better than anything else at this price point. Other brands in the market place write 4 gauge, but cheat you on the thickness. We are honest about the thickness.

4. The Rockville amplifier installation kits feature a new soft abrasion proof insulating jacket. This rugged PVC outer jacket allows for 100% improved flexibility over standard power cables making them extremely easy to route through your vehicles interior, and it maintains exceptional resistance to grease and oil. The PVC outer jacket can with-stand an extreme temperature range of -40 to 220 degrees F.

TheRCA signal transfer cables included in this kit feature blue and silvertwisted pair technology in a clear outer jacket insulation skin. Notonly do the blue and silver wires look cool but they also providesuperior signal transfer with maximum noise suppression. They are 100%copper to provide absolute lossless perfect signal transfer to yourreceiver. This technology reduces interference, so your audio signalflows clean and pure at all power levels.

Thiskit also includes a massive 60 Amp AGU Gold Plated Fuse, so you can besure it will handle the all the DC power that your amp will need withouteven the slightest loss of current. The included 7 split loom tubeprovides protection for your power cable from the typically harshenvironment found under the hood of your car.

Audiosavingsproduct experts have tested this amp kit against many leading amp kitson the market and were were impressed not only by the great looks but bythe quality of these Rockville installation kits as well. These kitshad a lower resistance rating than the other brands we compared andtested them against. What this means is that Rockville manufacturestheir kits with more copper than other kits at this price point,ultimately providing your amplifiers with better and cleaner DC power,so they work cooler and more efficiently. You will hear the difference aRockville installation kit will make!

Features:

• 1 – 17’ High Grade Twisted Pair of 100% Copper RCA Cable
• 17’ – 4 Gauge Translucent Blue SuperFlex Power Cables
• 17’ – 18 Gauge Blue Remote Cable
• 17’ – 16 Gauge Clear Speaker Wire
• 3’ – 4 Gauge Clear SuperFlex Ground Wire
• Gold Plated AGU Heat Resistant Fuse Holder
• 60 Amp AGU Gold Plated Fuse
• 7’ Split Tube Loom
• Accessories Included: Wire Ties, Ring Terminals, Butt Connectors, Spades, and Grommets

Description for Rockville Enclosure:

The RSVK10 is a single 10" vented sub box is made in the USA with Grade “A” ¾” MDF wood. This enclosure is designed to work with the Kicker square subwoofers such as S10L7, S10L3, S10L5. It is made to exact Kicker recommended specifications.

These enclosures are made with precision cutting machinery by industry experts that have been making these enclosures in the USA for over 20 years. All Rockville enclosures come with a customized enhanced glue that is unmatched by any other manufacturer. That means that the carpet will stay in place and not rip or tear. The ¾” USA MDF is much stronger then any type of import wood. This will keep your box performing at an optimal level by not flexing and distorting your woofers. Your woofers will thank you! EVERY Rockville enclosure is not only glued at all joints but stapled as well. If that wasn’t enough we add a layer of silicon to every seam! This makes your Rockville enclosure rock even more!

MADE IN THE USA WITH PRIDE!

Features:

• Rockville RSVK10 Single 10" Square 1.10 cu. ft. 3/4" MDF Vented Subwoofer Enclosure Box
• Specifically Designed For The 10" Kicker L7,L5, L3 Subwoofers
• This is also perfect for other square subwoofers such as MTX TS8512, Power Acoustik Square Subs, and Hifonics Square Subs
• Machine precision cut mounting holes
• ¾” USA Heavy Duty MDF Construction
• Top of the line Glue for extra durable adhesion
• High quality GOLD spring loaded terminals
• Designed, tested, and engineered to work perfectly with high powered subs
• Designed to give the best sound quality
• Tuning frequency: 37Hz

Enclosure Measurements:

• Type of Enclosure: Ported/Vented
• Enclosure Sub Size: Single 10"
• Dimensions in Inches: 16" x 14.25" x 12"
• Top and Bottom Depth: 14.25"
• Mounting Depth: up to 11" (enough depth for any shallow sub on the market)
• Gross Volume Per Sub (Measurement for the outer dimensions of the box): 1.6 Cubic Feet
• Net Volume Per Sub (Measurement for the outer dimensions of the box less the thickness of the wood): 1.10 Cubic Feet

Complete Single Subwoofer Enclosure Installation Kit!

Includes:

• 10 Drywall Wood Screws (Wood screws are the type of screws; the screws are actually made of metal)
• 12 Feet of 14 AWG Blue Speaker Wire
• 2 Spade Terminals

This accessory package includes everything you need to install one subwoofer into an enclosure, and wire to connect the enclosure to your amplifier. This package is a top of the line accessory package which we put together and tested.

The drywall wood screws were hand selected by our installation experts because they drill into the enclosure very cleanly, without chipping the enclosure. The speaker wire is 14 gauge. This is way better than using 16 gauge. You can be 100 % sure that your enclosure will have a clean signal to the amplifier with this top of the line speaker wire. These spade terminals have also been hand selected by our installation experts to make the internal wiring simple, secure, and to run the audio signal cleanly.