- (1) Kicker 44DL7S122 Dual 12" 3000w L7 Solo-Baric L7S Loaded Sub Enclosure 44L7S122
- (1) Rockford Fosgate R1200-1D 1200 Watt RMS Mono Amplifier Car Audio Amp
- (1) Rockville RWK0CU 0 AWG Gauge 100% Copper Complete Wire Kit OFC
Authorized Kicker Dealer!
Description of 44DL7S122:
The Dual Solo-Baric L7S 12-Inch Subwoofer Enclosure is a ready-made bass machine with a legendary pedigree. The enclosure features the custom-designed vent/terminal cup with an extra thick front baffle and fortified back bracing for one of the sturdiest enclosures in the industry. Two Solo-Baric L7S 12-Inch Subwoofers pound out massive bass with a single 2Ω connection.
Features:
- Kicker 44DL7S122 Dual 12" 3000w L7 Solo-Baric L7S Loaded Sub Enclosure 44L7S122
- Genuine Solo-Baric L7S Subwoofer Included
- Custom Engineered Port Design
- Heavy Internal Bracing
- Single 2-Ohm Terminal
- Easy To Install And Wire
- Thick Black Carpeting
- Rounded Corners
- Embroidered KICKER Logo
- Thick MDF Construction
- The Dual Solo-Baric L7S 12-Inch Subwoofer Enclosure works best with 1500 watts of recommended power.
Specifications:
- Type: Dual
- Woofer: Solo-Baric L7 12"
- Impedance: 2 Ohms
- Power Watts: 3000 Peak / 1500 RMS
- Frequency Response: 20-500 Hz
- Sensitivity: 89.9 dB 1w/1m
- Box Top Depth: 16-1/4" (41.3 cm)
- Box Bottom Depth: 19-1/2" (19.4 cm)
- Box Height: 16" (40.6 cm)
- Box Width: 33-3/4" (85.7)
- Includes one loaded enclosure with two 12-inch subwoofers; mounting hardware (4 - black brackets, 4 - #10 black wood screws x 20mm, 8 - #8 black wood screws 20mm long); one owner's manual; two stickers
Features of R1200-1D:
- Variable crossover 12dB/octave slopes
- 4 Gauge power/ground terminals
- Cast aluminum heatsink
- Infrasonic filter
- RCA pass-thru
- Top mounted controls
- Tri-stage protection covers thermal, over-current and short circuits
- On-board PEQ (Punch Equalization) with 18 dB of boost at 45Hz
- CEA-2006 Compliant
Specifications:
- Number of Channels: 1
- RMS Power Handling:
- 600 Watts x 1 @ 4-Ohms
- 900 Watts x 1 @ 2-Ohms
- 1200 Watts x 1 @ 1-Ohm
- Total Power (Sum of RMS Power): 1200 Watts
- Low-Pass Crossover Controls: Variable 50Hz - 500Hz @ 12dB/Octave
- Tone Controls: 0dB to +12dB @ 45Hz
- Signal Input: Low Level: 1 RCA Pair
- Signal Output: 1 RCA Pair
- Power Input Connector: Block
- Power Wire Gauge: 4 AWG
- Speaker Output Connector: Block
- Speaker Wire Gauge: 12 AWG
- Remote Controls: Variable 0dB to +12dB @ 45Hz
- Visual Indicators:
- Power
- Protect
- Circuit Topology Class: Class-D
Video of RWK0CU:
We challenge anyone to put this wire to a resistance test against any other wire on the market with the same gauge. If our cable does not meet or exceed any other cable, even if it costs 3 times more, we will be happy to call tag the item and refund you in full. Why are we so confident ? This cable is 100% copper. You cant have a cable with more copper than 100 %. So the only way a cable would out-perform this one is if it were being advertised as a 0 AWG but they are giving you more wire than advertised. No brands selling 100 % copper cables actually do this.
We guarantee that this kit will compete with the most expensive amp kits on the market from Kicker, JL Audio, or any other top brands.
Maximum Power!
Looking for a wire kit that has 100% true specifications? A wire kit that uses 100% copper 0 gauge cable? Then look no further than the Rockville True-Spec RWK0-CU 0 Gauge Amplifier Wiring Installation Kit. This package includes everything you'll need to get your amplifier system powered-up correctly and at peak efficiency.
The power and ground cables aptly named “Mega Power Cable” are a no compromise power cable. Rockville’s engineering team over-built and designed the cables using thousands of strands of only true 100% oxygen-free, silver-tinned copper strands. The use of a proprietary special twisting process reduces “surface skin impedance loss” so that Mega Power cables have zero signal and power loss, delivering full power from your battery system to your amplifier even at lengths of 20 feet! The increased current flow and higher amperage carrying capacity will increase your amplifiers efficiency and keep your amplifier running cooler. The SuperFlex outer insulating jacket jacket makes installation and cable routing simple and easy. The 100% copper stranded wire is extremely tolerant of the hostile conditions found under the hood in vehicles and compensates for vibration, heat expansion and flexibility. This flexible and well shielded wire is crucial for getting through all of the nooks and passageways within the confines of a vehicle interior.
Some manufactures use all aluminum or mix a little copper with aluminum to give their cables the appearance of a “heavy-duty” cable. But not Rockville, our True-Spec 100% oxygen free, silver tinned copper eliminates corrosion, increases current transfer x 10, and won’t discolor over time.
The superior quality and materials of the Rockville 100% True-Spec amplifier installation kit is realized in the included accessories and cable workmanship. Included is a precision CNC cut full size ANL fuse housing, machined from solid brass and then 14K gold plated for superior signal transfer and complete with a matching gold plated 250-amp ANL fuse. The power cable is wrapped in 6 feet of durable nylon braided tubing to protect it from heat and chafing in the engine compartment. All installation accessories such as the ring terminals and spade connectors are nickel plated for superior signal transfer and durability.
CRYSTAL SQ AUDIO PLANAR SPEAKER CABLE
The speaker cable included in the Rockville True-Spec is also manufactured from 100% copper and woven in to a flat planner design and coated in our Super-Flex insulation so that it fits under and around your vehicles trim and carpet smoothly and without bulking up. With crystal clear sound quality these speaker cables deliver true audio fidelity from your car audio amplifier to your speakers. The 12 gauge speaker cable included in the 0 gauge kit can handle over 3000 watts of power without heating up or degrading signal quality.
CRYSTAL SQ RCA AUDIO INTERCONNECT CABLE
Designed and engineered to be the best sounding, best performing and best looking RCA cables available today. Each channel in the RCA cable is triple shielded first with dielectric internal insulators and then with a 98% coverage woven shield. All cables are manufactured of 100% oxygen free copper and feature twisted pair technology for superior noise rejection and pure sonic signal flow. The RCA plugs are shielded metal and feature a spiral cut outer ground ring with center split pin for precise and tight audio connections. The result of all this technology is noise free-noise rejection signal transfer for optimum sound quality. You will hear the difference these RCA signal transfer cables will make.
Amplifier Kit Key Features:
- 0 Gauge Power Amplifier Installation Kit
- Designed specifically for car audio systems over 1000 watts RMS to 3000 Watts
- Made from silver-tinned 100% virgin copper for a pure uninterrupted transfer of power and signal
- The solid brass gold plated ANL Fuse Holder offers ideal protection for high powered systems
- Strand Count: 4704
- BC-5W2 Compliant
Kit includes:
- 17 ft. Frosted Blue 0 gauge power wire with seamless crimp ring terminal
- 3 ft. Frosted Gray 0 gauge ground wire
- 17 ft. Blue 18 gauge remote lead wire
- 25 ft. Frosted Clear/Blue 12 gauge flat speaker wire
- 17 ft. Triple shielded twisted pair RCA cables
- One ANL Fuse Holder with 250 amp ANL fuse
- One 1/2" black rubber firewall grommet
- Two 0 gauge spade terminals
- Two black 12 gauge nickel-plated spade lugs
- Three blue 12 gauge nickel-plated spade lugs
- One black 0 gauge ring terminal
- Ten 6" black zip ties
About Rockville Quality Control Procedures:
The Rockville brand stands for Quality, Innovation and Value. All Rockville products go through the most rigorous quality control standards in the industry. Products go through months of extensive testing before they reach your hands. All user functions are tested and all internal components are tested for quality. Rockville makes products that are virtually un-breakable! Rockville is one of the only brands in its class to test every concept model for weeks or months before starting production. Once production begins, Rockville sends product engineers to their factory to quality control every line of production. During production every product is tested and on top of that Rockville goes the extra mile and has their high level product engineers do an additional quality control. They test a certain percentage of all products from the production line a second time to ensure that the quality meets their vigorous standards, and to make sure that there is never a batch of products with even a slight problem. All Rockville products are backed with a hassle free warranty.
- UPC:
- 613815942849
