- (4) Rockville RSG12 12” 3-Way 1000 Watt 8-Ohm Passive DJ/Pro Audio PA Speaker
- (1) Rockville RPA60BT V2 1000 Watt 2-Ch USB Bluetooth DJ/Pro/Karaoke Amplifier Mixer
- (2) Rockville RCGT20B 20' 1/4'' TS to 1/4'' TS Instrument Cable-Black 100% Copper
- (2) Rockville RCXBN20 20 Foot 1/4" TS to Banana Speaker Cable, 16 Gauge, 100% Copper
How to Set Up Your Rockville RSG Speakers:
We are proud to introduce to you the Rockville RSG series of speakers. These are affordable speakers with high-end performance; specially built for DJ's as well as professional audio applications. After conducting strategic market research, Rockville is proud to bring you this new line of speakers that were engineered to combine incredible power handling, superior sound and unbelievable build quality. The goal was to create a line of passive DJ speakers that were double as good as the competition but cost half as much.
The Rockville RSG-12 speaker system features a high quality 12" low frequency woofer with three electronic, high-efficiency piezo bullet tweeters and one high efficiency piezo compression horn tweeter that provide a true full-range of sound. This speaker produces an incredible amount of power. 1000 Watts peak, 750 Watts Program Power, and 500 Watts RMS Power.
Constructed using thicker than standard, high-quality, high-density materials our cabinets are strong and rigid yet light weight enough to make travel and set-up a breeze. Built-in ergonomic, recessed handles give these speakers additional carrying ease, for all you DJ's who travel from party to party. The sturdy custom-molded steel grill protects the drivers combined with corner protectors, pre-mounted rubber isolating feet and durable, aviation grade black carpet make our speaker cabinets tough enough to withstand every day abuse.
Engineered from the ground up, the tapered trapezoidal shape, produces wide, clear sound dispersion that will reproduce your program source materials loudly, with accuracy and musical transparency.
Multiple inputs, typically found on high-end speakers are standard equipment on the Rockville RSG-12. Two input connectors, ¼” IN/OUT and speakON connection make the Rockville RSG-12 able to integrate in to any existing amplification system. Additional installation flexibility is available via the reinforced, built-in 35mm pole socket mount located on the underside of the cabinet.
So if you are looking for a top-of-the-line quality DJ speaker that is rugged, can handle lots of power and sounds incredible, then the Rockville RSG-12 has got you covered. Built-to-last, these speakers are protected by a full one year warranty.
Features:
- Rockville RSG-12 Carpeted Passive Loudspeaker
- Single 12” Pro Audio Woofer
- (3) Piezo 3" Bullet Tweeters
- (1) High Efficiency Piezo Compression Horn
- RMS Power: 500 Watts
- Program Power: 750 Watts
- Peak Power: 1000 Watts
- 2” High Temperature Aluminum Voice Coil
- 8-Ohm Impedance
- Sensitivity: 99dB @ 1w/1m
- Frequency Response: 45Hz - 22 kHz
- SpeakON Input connection
- ¼” In/Out connections (Parallel)
- Dimensions: (15.4+8.6)x12.5x25.5in
- Weight: 28Lbs
- Pole Mountable
- Rubber Isolating Feet
- Construction: Top quality MDF - Stapled, Bonded & Braced
RPA SERIES PRODUCT VIDEO:
HOW TO SET UP YOUR RPA SERIES (RPA70WBT V2, RPA60BT):
What's in the Box:
- RPA60BT Receiver
- Rack Ears (Detachable)
- (1) Remote Control
- (1) AC Power Plug
- Owners Manual
- Warranty Card
Description of RPA60BT V2:
Huge Power
The RPA60BT is loaded with 1,000 Watts of power! When manufacturing this item we upgraded the power of the amplifier. We tested these against similar items on the market and these significantly outperformed the others rated at 2000 and 3000 watts.
Expandable
This is more than an amplifier. The RPA60BT will be the control center for your home, karaoke, or professional audio system. There is an optical and coaxial input to easily integrate this with any television or LED panel. There is an RCA aux input for any media player like a CD player, etc. There is an RCA pre-amp output allowing you to expand your system by adding another amplifier or even powered speakers. The sub output allows you to add a powered subwoofer or another amplifier. The REC output allows you to record easily.
You can also connect 2 microphones directly to the front of the receiver.
Other playback options built into the unit are USB playback, Bluetooth, 3.5mm aux, and FM radio.
Great For Karaoke
There is a built in mic mixer with echo control, which makes this perfect for karaoke performances.
Bluetooth
Connect your favorite device, and quickly start a karaoke party with your favorite songs!
Full Function Remote
The remote control that is included will allow you to access all functions of the receiver quickly and efficiently.
Built In Radio
Another major advantage this model has is that it has a built in radio. This makes it perfect for home use, and the radio is also great for intermissions during live performances.
Adjustable Equalizer Settings
The adjustable equalizer will allow you to fine tune your music so it sounds at its best.
Built In Dual Cooling Fan
The built in fans keep the amp cool. This amp will never overheat on you like the cheaper ones out there. We actually upgraded this to a dual cooling fan when we were engineering these. Since we upgraded the amplifier we actually felt the need to also upgrade the fan of this unit to ensure it doesn't overheat.
Beautiful Multi Colored Display
The multi colored display is easy to read. It has an active EQ curve that goes to the beat of the music. The display is very user friendly.
Features:
- Rockville RPA60BT 19" 1000 Watt 2-Channel USB and Bluetooth Karaoke Receiver/Amplifier/Mixer
- 19" rack mountable (removable rack brackets) digital hybrid amplifier/receiver
- RMS Power @ 4 Ohms: 125w x 2
- Peak Power @ 4 Ohms: 500w x 2
- RMS Power @ 8 Ohms: 100w x 2
- Peak Power @ 8 Ohms: 400w x 2
- THD: > 0.1%
- Input Sensitivity: 400mv/33 KOhm
- Frequency Response: 20 Hz - 20 kHz
- Signal to Noise Ratio: 80 dB
- Tone Characteristic: 100Hz-10KHz ±12dB
- 110v/220v Switchable
- Front Inputs: 3.5MM front aux input, 1/4” Headphone Jack, (2) 1/4" Mic Inputs, USB Input, Optical
- Rear Inputs: RCA, Optical, Coaxial
- Rear Outputs:
- Preamp output for an external additional amplifier or powered speaker
- Sub preamp output to connect a powered subwoofer or an amplifier
- Record output to mixer
- Record output to connect a recording device
- Bluetooth Capable
- Rear Speaker Terminals: Banana plug / binding post outputs for 4 speakers (2 on Channel A and 2 on Channel B)
- Built-in Pre-Amplifier
- Bass, treble, and balance control knobs
- Multicolor VFD Display
- FM Radio Tuner with Presets & Auto-Scan
- Preset EQ: Rock, Pop, Classical, Jazz
- Remote control for quick access to all functions
- Vacuum Fluorescent Digital Output Display Meters
- Separate gain controls for master volume & subwoofer
- Digital Karaoke System
- 2 front microphone inputs with volume, tone and echo controls
- Built-In Mic Mixer with Echo Control
- USB input for music files from USB thumb drive
- 3.5mm input for iPod / MP3 player
- Spectrum analyzer equalizer display
- Turbo cooling twin fan system
- Dimensions with rack ears (W x D x H): 19" x 12.25" x 3.5" inches
- Dimensions without rack ears (W x D x H): 17" x 12.25" x 3.5" inches
Video of RCGT20B:
Description:
All Rockville pro audio cables are made with 100% copper which boosts the efficiency of the cable. There is nothing better than 100% copper. Most of the cheaper cables on the market do not use 100% copper, instead they make their cables with CCA (Copper Clad Aluminum). CCA cables do not perform on the level that 100% copper cables perform at. CCA will not conduct signals efficiently. A 12 gauge CCA cable will not even perform as well as a 14 gauge 100% pure copper cable, which will in turn, affect the performance and longevity of your equipment. If you find cables on the market that do not mention the copper content, there is a good chance that they are selling you a cheaper cable that is CCA and not 100% copper. Rockville pays an inspection company to oversee the manufacturing of the product to ensure that we provide a 100% Oxygen Free Copper Cable (OFC). Our OFC cables are less prone to oxidation, and will provide maximum signal transfer.
The other important factor of a cable is the shielding. Most of the good brands on the market have about 85% shielding coverage, so we decided to take our shielding a step further. Rockville cables are shielded with a tight copper mesh, covering 90% of the cable! The high percentage of coverage increases the ability to absorb the Electromagnetic Interference (EMI) and Radio Frequency Interference (RFI) that suppresses signal and degrades the performance of equipment. Rockville Cable’s copper shielding provides great flexibility, maintains a durable structural integrity, while decreasing signal interference ensuring enhanced signal clarity with every use.
- Rockville RCGT20 1/4'' TS to 1/4'' TS Guitar / Instrument Cable
- 24 AWG 100% Copper Conductors for Enhanced Signal Clarity
- Nickel Plated, 1/4" Straight-to-Same Connectors
- High Density 90% Coverage OFC Braid Shield for Superior EMI and RFI rejection
- Length: 20 Ft
- Color: Black
Description of RCXBN20:
All Rockville pro audio cables are made with 100% copper which boosts the efficiency of the cable. There is nothing better than 100% copper. Most of the cheaper cables on the market do not use 100% copper, instead they make their cables with CCA (Copper Clad Aluminum). CCA cables do not perform on the level that 100% copper cables perform at. CCA will not conduct signals efficiently. A 16 gauge 100% pure copper cable will perform better than thicker CCA cables on the market. If you find cables on the market that do not mention the copper content, there is a good chance that they are selling you a cheaper cable that is CCA and not 100% copper. Rockville pays an inspection company to oversee the manufacturing of the product to ensure that we provide a 100% Oxygen Free Copper Cable (OFC). Our OFC cables are less prone to oxidation, and will provide maximum signal transfer.
Features:
- Rockville RCXBN20 16 AWG ¼” TS to Banana Plug Pro Speaker Cable
- 100% Oxygen Copper Conductors for Lower Resistance
- Black PVC Jacket for Both Durability and Flexibility
- Superior wiring eliminates frustrating hums, buzzing, and crackles.
- Rugged rubber-insulated exterior and sturdy construction enhances signal and performance.
- ROHS compliant
- Length: 20 Ft
- Gauge: 16
- UPC:
- 613815699927
