Package Includes:

• (2) Rockford Fosgate 12" Car Subwoofers
• (1) Rockville Dual 12” 1.25 cu.ft. 3/4” MDF Sealed Subwoofer Enclosure Sub Box
• (1) MTX THUNDER1000.1 1000 Watt RMS Mono Class D 1-Ohm Amplifier Car Audio Amp
• (1) Rockville RWK4CU 4 AWG Gauge 100% Copper Complete Amp Installation Wire Kit OFC
• 20 Drywall Wood Screws (Wood screws are the type of screws; the screws are actually made of metal)
• 20 Feet of 14 AWG Blue Speaker Wire
• 4 Spade Terminals

---

Features of Rockford Fosgate Subs:

• Rockford Fosgate Punch P3D4-12 12" 1200 Watt
• Size: 12 inches
• Peak Power: 1200 Watts
• RMS Power: 600 Watts
• Nominal Impedance: Dual 4-Ohm
• Anodized aluminum cone and dustcap
• Custom 10-AWG nickel plated push terminals
• Diamond cut cast aluminum trim ring
  
• Dual linear spider with embedded 16 AWG tinsel leads
• Extended pole piece and bumped vented backplate
• High-temp voice coil with spun-laced Nomex® re-inforcement collar
• Protective PVC textured magnet cover
• StampCast basket with integrated spider venting
• Cutout Diameter: 11.25 inches / (285 mm)
• Mounting Depth:6.66 inches / (169.3 mm)
• Voice Coil Diameter: 2.5" / (65.5 mm)
• Magnet Weight: 96 oz / 2.73 kg
• Speaker Connector: Dual 10 AWG compression
• Woofer Displacement: 0.194 cu.ft / (5.5 Liters)
• Shipping Weight: 20.9 Lbs / (9.48 kg)
• Fs (Hz): 27.7
• Re (Ohms): 6.40
• Le (mH): 6.94
• Qms: 5.60
• Qes: 0.57
• Qts: 0.52
• Vas (Liters): 57.7
• Sd (cm2): 570
• SPL (dB @ 1w/1m): 85
• Xmax (mm): 15.9
• Sealed - Enclosure
• Vb: 1.02 cu.ft
• F3: 43.7 Hz
• Qtc: 0.85
• Height: 14 inches
• Width: 18 inches
• Depth: 10 inches
• Speaker Cutout: 11.25 inches
• Speaker Depth: 6.66 inches
• Vd: 0.194 cu.ft
• Vented - Enclosure
• Vb: 1.79 cu.ft
• Fb: 40 Hz
• F3: 33.5 Hz
• Height: 14 inches
• Width: 25 inches
• Depth: 12 inches
• Np: 1 port
• Dp: 4 inches diameter
• Lp: 10 inches long
• Speaker Cutout: 11.25 inches
• Speaker Depth: 6.66 inches
• Vd: 0.194 cu.ft
• Vp: 0.073 cu.ft
• Minimum Sealed Box Volume: 0.50 cubic feet
  
• Optimum Sealed Box Volume: 0.75 cubic feet
  
• Maximum Sealed Box Volume: 0.85 cubic feet
  
• Minimum Ported Box Volume: 0.70 cubic feet
  
• Top-Mount Depth: 4.57"
  
• Cutout Diameter: 9.13"

---

Description of THUNDER1000.1:

Feel the Thunder
MTX THUNDER1000.1 is designed to work with an assortment of subwoofers and is capable of delivering up to 2000 watts peak power (1000 watts RMS) in an incredibly small package.

This wailin' amp features a high efficiency class D topology. This type of circuit is preferred for driving subwoofers due to its ability to minimize power loss to heat when you rock all night long.

High Power High Value
The THUNDER1000.1 is a high powered subwoofer amplifier capable of delivering up to 1000 watts RMS power at 1Ω. Additionally, the unit is designed to be installed in almost any vehicle due to its small chassis size.

Technologically Advanced
The THUNDER1000.1 features surface mount technology. This design uses smaller more efficient parts that adhere to the circuit board much better than traditional through hole designs making it extremely vibration resistant.

Easy Adjustment
The control panel on the THUNDER1000.1 is easy to access and make adjustments. The unit includes a variable low pass filter and a selectable bass boost, 0, +6, or +12dB. The unit also features a subsonic filter that can be used in conjunction with a vented enclosure for optimal sound quality.

Secure Connections
The THUNDER1000.1 uses set screw type connections for both its power and speaker terminals. The power and ground inputs will support up to a 1/0 AWG wire and the speaker inputs can support up to a 12 AWG wire. Set screw type connectors provide the most secure connection minimizing power loss and delivering all the power to the amplifier and to the speakers.

Features:

• MTX THUNDER1000.1 1000 Watt RMS Mono Class D 1-Ohm Amplifier Car Audio Amp
• Small Footprint
  
• Extruded Aluminum Heat Sink
  
• Selectable Bass Boost: 0, 6, or 12dB
  
• Surface Mount PCB Design
  
• Variable Butterworth Crossover 12dB/Oct
  
• Variable Subsonic Filter
  
• Thermal, DC Offset, and Short Circuit Protection Circuitry
  
• Description: Mono Block
  
• 4 Ohm RMS Power Output: 350W x 1 Channel
  
• Signal to Noise Ratio: 80dB
  
• 2 Ohm RMS Power Output: 600W x 1 Channel
  
• 1 Ohm RMS Power Output: 1000W x 1 Channel
  
• Topology: Class D
  
• THD: <1%
  
• Frequency Response: 10Hz - 220Hz
  
• Low Pass Filter: Variable Low @ 40Hz to 220Hz, 12dB/Oct
  
• Subsonic Filter: 10Hz to 50Hz, 12dB/Oct Variable
  
• Bass Boost: 0, 6, 12dB Switchable
  
• Max Sensitivity: 200mV
  
• Maximum Input Signal: 5V
  
• Height: 6.3"
  
• Width: 12.13"
  
• Depth: 2.25"

---

Description for Rockville Enclosure: 

The RD12 dual sealed speaker box is made in the USA with Grade “A” ¾” MDF wood. This enclosure is made with precision cutting machinery by industry experts that have been making these enclosures in the USA for over 20 years. All Rockville enclosures come with a customized enhanced glue that is unmatched by any other manufacturer. That means that the carpet will stay in place and not rip or tear. The ¾” USA MDF is much stronger then any type of import wood.  This will keep your box performing at an optimal level by not flexing and distorting your woofers. Your woofers will thank you!  EVERY Rockville enclosure is not only glued at all joints but stapled as well. If that wasn’t enough we add a layer of silicon to every seam! This makes your Rockville enclosure rock even more!

MADE IN THE USA WITH PRIDE!

Features:

• Rockville RD12 Dual 12" Sealed Subwoofer Enclosure
• Proudly Made In The USA, Using Only The Finest Quality Materials - For The Best Level of Performance From Your Subs!
• 3/4" USA Heavy Duty MDF Construction
• Machine precision cut mounting holes
• Top of the line Glue for extra durable adhesion
• Designed, tested, and engineered to work with most of today’s popular woofers. These enclosures are built with the quality additives needed to maximize the performance of any sound system.

Enclosure Measurements:

• Type of Enclosure: Sealed
• Enclosure Sub Size: Dual 12"
• Dimensions in Inches: 13.25” x 13.25” x 32”
• Top and Bottom Depth: 14"
• Mounting Depth: up to 12" (enough depth for any sub on the market)
• Gross Volume Per Sub (Measurement for the outer dimensions of the box): 1.55 Cubic Feet
• Net Volume Per Sub (Measurement for the outer dimensions of the box less the thickness of the wood): 1.25 Cubic Feet

---

Complete Dual Subwoofer Enclosure Installation Kit!

Includes:

• 20 Drywall Wood Screws (Wood screws are the type of screws; the screws are actually made of metal)
• 20 Feet of 14 AWG Blue Speaker Wire
• 4 Spade Terminals

This accessory package includes everything you need to install two subwoofers into an enclosure, and wire your enclosure to your amplifier.  This package is a top of the line accessory package which we put together and tested. 

The drywall wood screws were hand selected by our installation experts because they drill into the enclosure very cleanly, without chipping the enclosure.  The speaker wire is 14 gauge.  This is way better than using 16 gauge.  You can be 100 % sure that your enclosure will have a clean signal to the amplifier with this top of the line speaker wire.  These spade terminals have also been hand selected by our installation experts to make the internal wiring simple, secure, and to run the audio signal cleanly.

---

Video of RWK4CU:

Authorized Rockville Dealer!

We challenge anyone to put this wire to a resistance test against any other wire on the market with the same gauge. If our cable does not meet or exceed any other cable, even if it costs 3 times more, we will be happy to call tag the item and refund you in full. Why are we so confident ? This cable is 100% copper. You cant have a cable with more than 100 % copper. So the only way a cable would out-perform this one is if it were being advertised as a 4 AWG but they are giving you more wire than advertised. No brands selling 100 % copper cables actually do this.

We guarantee that this kit will compete with the most expensive amp kits on the market from Kicker, JL Audio, or any other top brands.

Maximum Power!
Looking for a wire kit that has 100% true specifications! A wire kit that uses 100% copper 4-gauge cable! Then look no further than the Rockville True-Spec RWK4-CU 4 Gauge Amplifier Wiring Installation Kit. This package includes everything you'll need to get your amplifier system powered-up correctly and at peak efficiency. All items included in this kit are top of the line.

The power and ground cables aptly named “Mega Power Cable” is a no compromise power cable. Rockville’s engineering team over-built and designed the cables using thousands of strands of only true 100% oxygen-free, silver-tinned copper strands. The use of a proprietary special twisting process reduces “surface skin impedance loss” so that Mega Power cables have zero signal and power loss, delivering full power from your battery system to your amplifier even at lengths of 20 feet! The increased current flow and higher amperage carrying capacity will increase your amplifiers efficiency and keep your amplifier running cooler. The SuperFlex outer insulating jacket jacket makes installation and cable routing simple and easy. The 100% copper stranded wire is extremely tolerant of the hostile conditions found under the hood in vehicles and compensates for vibration, heat expansion and flexibility. This flexible and well-shielded wire is crucial for getting through all of the nooks and passageways within the confines of a vehicle interior.

Some manufactures use all aluminum or mix a little copper with aluminum to give their cables the appearance of a “heavy-duty” cable. But not Rockville, our True-Spec 100% oxygen free, silver tinned copper eliminates corrosion, increases current transfer x 10, and won’t discolor over time.

The superior quality and materials of the Rockville 100% True-Spec amplifier installation kit is realized in the included accessories and cable workmanship. Included is a precision CNC cut full size ANL fuse housing, machined from solid brass and then 14K gold plated for superior signal transfer and complete with a matching gold plated 120-amp ANL fuse. The power cable is wrapped in 6 feet of durable nylon braided tubing to protect it from heat and chafing in the engine compartment. All installation accessories such as the ring terminals and spade connectors are nickel plated for superior signal transfer and durability.

CRYSTAL SQ AUDIO PLANAR SPEAKER CABLE
The speaker cable included in the Rockville True-Spec is also manufactured from 100% copper and woven in to a flat planner design and coated in our Super-Flex insulation so that it fits under and around your vehicles trim and carpet smoothly and without bulking up. With crystal clear sound quality these speaker cables deliver true audio fidelity from your car audio amplifier to your speakers. The 14-gauge speaker cable included in the 4-gauge kit can handle over 2000 watts of power without heating up or degrading signal quality.

CRYSTAL SQ RCA AUDIO INTERCONNECT CABLE
Designed and engineered to be the best sounding, best performing and best looking RCA cables available today. Each channel in the RCA cable is triple shielded first with dielectric internal insulators and then with a 98% coverage woven shield. All cables are manufactured of 100% oxygen free copper and feature twisted pair technology for superior noise rejection and pure sonic signal flow. The RCA plugs are shielded metal and feature a spiral cut outer ground ring with center split pin for precise and tight audio connections. The result of all this technology is noise free-noise rejection signal transfer for optimum sound quality. You will hear the difference these RCA signal transfer cables will make.

Amplifier Kit Key Features:

• Rockville RWK4CU 4 Gauge 2 Channel Complete Car Amplifier Installation Kit 100% Pure Copper RCA Cables
  
• 4 Gauge Power Amplifier Installation Kit
• Designed specifically for car audio systems over 1000 watts RMS to 2000 Watts
• Made from silver-tinned 100% virgin copper for a pure uninterrupted transfer of power and signal
• The solid brass gold plated Mini ANL Fuse Holder offers ideal protection for high powered systems
• Strand Count: 1862
• BC-5W2 Compliant

Kit includes:

• 17 ft. Frosted Blue 4 gauge power wire with seamless crimp ring terminal
• 3 ft. Frosted Gray 4 gauge ground wire
• 17 ft. Blue 18 gauge remote lead wire
• 25 ft. Frosted Clear/Blue 14 gauge flat speaker wire
• 17 ft. Triple shielded twisted pair RCA cables
• One Mini ANL Fuse Holder with 120 amp ANL fuse
• One 1/2“ black rubber firewall grommet
• One 4 gauge spade terminal
• Two black 12 gauge nickel-plated spade lugs
• Three blue 12 gauge nickel-plated spade lugs
• One black 4 gauge ring terminal
• Ten 6” black zip ties