• 90 Day Hassle Free Returns
  • Free Same Day Shipping
  • Expert Advice
  • Lowest Price Guarantee

(2) Rockford Fosgate P3D2-12 12" Subwoofers+Enclosure+Kicker CXA1200.1 Amplifier

(2) P3D2-12+12CX12001+RWK01+RD12
$1,298.88 $609.95
(You save $688.93)
(No reviews yet) Write a Review
43CXA12001, P3D2-12, RD12, RWK01

Warranty Information:


Out of stock

Enter your email address to be notified when this item is back in stock.

FREE Shipping

Call for Expert Advice
Call now: 1-646-758-0144

Package Includes:

  • (2) Rockford Fosgate P3D2-12 12" Subwoofers
  • (1) Kicker 43CXA12001 1200W RMS Car Stereo Amplifier
  • (1) Rockville RWK01 0 Gauge Complete Car Amp Wiring Installation Wire Kit w/ RCA's
  • (1) Rockville RD12 Dual 12” Subwoofer Enclosure

Features Of P3D2-12:

  • Rockford Fosgate Punch P3D2-12 12" 1200 Watt
  • Size: 12 inches
  • Peak Power: 1200 Watts
  • RMS Power: 600 Watts
  • Nominal Impedance: Dual 2-Ohm
  • Anodized aluminum cone and dustcap
  • Custom 10-AWG nickel plated push terminals
  • Diamond cut cast aluminum trim ring
  • Dual linear spider with embedded 16 AWG tinsel leads
  • Extended pole piece and bumped vented backplate
  • High-temp voice coil with spun-laced Nomex® re-inforcement collar
  • Protective PVC textured magnet cover
  • StampCast basket with integrated spider venting
  • Cutout Diameter: 11.25 inches / (285 mm)
  • Mounting Depth: 6.66 inches / (169.3 mm)
  • Voice Coil Diameter: 2.5" / (65.5 mm)
  • Magnet Weight 96 oz / 2.73 kg
  • Speaker Connector: Dual 10 AWG compression
  • Woofer Displacement: 0.194 cu.ft / (5.5 Liters)
  • Fs (Hz): 26.5
  • Re (Ohms): 3.20
  • Le (mH): 4.25
  • Qms: 6.70
  • Qes: 0.53
  • Qts: 0.49
  • Vas (Liters): 57.7
  • Sd (cm2): 570
  • SPL (dB @ 1w/1m): 85
  • Xmax (mm): 15.2
  • Sealed - Enclosure
    • Vb: 1.02 cu.ft
    • F3: 43.4 Hz
    • Qtc: 0.8
    • Height: 14 inches
    • Width: 18 inches
    • Depth: 10 inches
    • Speaker Cutout: 11.25 inches
    • Speaker Depth: 6.66 inches
    • Vd: 0.194 cu.ft
  • Vented - Enclosure
    • Vb: 1.79 cu.ft
    • Fb: 40 Hz
    • F3: 33.2 Hz
    • Height: 14 inches
    • Width: 25 inches
    • Depth: 12 inches
    • Np: 1 port
    • Dp: 4 inches diameter
    • Lp: 10 inches long
    • Speaker Cutout: 11.25 inches
    • Speaker Depth: 6.66 inches
    • Vd: 0.194 cu.ft
    • Vp: 0.073 cu.ft
    • Recommended Enclosure Type: ported or sealed
    • Minimum Sealed Box Volume: 0.50 cubic feet
    • Optimum Sealed Box Volume: 0.75 cubic feet
    • Maximum Sealed Box Volume: 0.85 cubic feet
    • Minimum Ported Box Volume: 0.70 cubic feet
    • Top-Mount Depth: 4.57"
    • Cutout Diameter: 9.13"

Description of 43CXA12001:

CX Series amps reach massive power levelsthanks to an optimized circuit layout and the highest-grade internalcomponents available. Highly efficient heat sinks keep the amp cool witha sophisticated new look. Mono amps offer an optional remote levelcontrol to adjust your bass right from the dash.

The CX 1200.1 Mono Amplifier is built for big bass in a sleek, yet affordable package.

Using a Class D power plant, this amp features a variable bass boostwith KickEQ™, giving you as much as a 12dB of extra bump with a simpleturn of the optional CXRC Remote Bass Controller. A powerful 12dBcrossover and 24dB subsonic filter is included, letting you quickly tuneyour system to perfection.


  • Kicker 43CXA12001 1200 Watt RMS Mono Class D Car Stereo Amplifier
  • RMS Power @ 2 Ohms 1200 Watts x 1 Channel
  • RMS Power @ 4 Ohms 600 Watts x 1 Channel
  • Input Sensitivity Selector:
    • high level 250mV-10V,
    • low level 125mV-5V
  • Frequency Response 25 to 200 Hz
  • LED power (green) and protect (red) indicators
  • 3-way protection circuitry (thermal, overload, and speaker short protection)
  • Dual speaker terminals simplify the hookup of multiple speakers
  • Soft start turn-on
  • Pulse Width Modulated MOSFET power supply
  • Mono channel operation
  • Speaker-level (high-level) inputs via RCA
  • Preamp RCA outputs to daisy chain multiple amps
  • 4-gauge power and ground leads and a 150-amp fuse recommended (Not include in this amplifier)
  • Signal-to-Noise Ratio (SNR): 95 dB
  • Subsonic Filter: 24dB/octave high-pass fixed @ 25Hz
  • Active Crossover: 12dB/octave, variable 50-200Hz, low pass only
  • KickEQ™ Boost: variable to +12dB, centered @ 40Hz
  • CXRC wired remote bass level control sold separately
  • Dimensions (HxWxD): 2 3/8" x 7 3/16" x 12 1/16"

Description of RD12:

The RD12 dualsealed speaker box is made in the USA with Grade “A” ¾” MDF wood.This enclosure is made with precisioncutting machinery by industry experts that have been making theseenclosures in the USA for over 20 years. All Rockville enclosures comewith a customized enhanced glue that is unmatched by any othermanufacturer. That means that the carpet will stay in place and not ripor tear. The ¾” USA MDF is much stronger then any type of importwood. This will keep your box performing at an optimal levelby not flexing and distorting your woofers. Your woofers will thankyou! EVERY Rockville enclosure is not only glued at all jointsbut stapled as well. If that wasn’t enough we add a layer ofsilicon to every seam! This makes your Rockville enclosure rock evenmore!



  • Rockville RD12 Dual 12" Sealed Subwoofer Enclosure
  • Proudly Made In The USA, Using Only The Finest Quality Materials - For The Best Level of Performance From Your Subs!
  • 3/4" USA Heavy Duty MDF Construction
  • Machine precision cut mounting holes
  • Top of the line Glue for extra durable adhesion
  • Designed, tested, and engineered to work with most of today’s popular woofers. These enclosures are built with the quality additives needed to maximize the performance of any sound system.


  • Type of Enclosure: Sealed
  • Enclosure Sub Size: Dual 12"
  • Dimensions in Inches: 13.25” x 13.25” x 32”
  • Top and Bottom Depth: 14"
  • Mounting Depth: up to 12" (enough depth for any sub on the market)
  • Gross Volume Per Sub (Measurement for the outer dimensions of the box): 1.55 Cubic Feet
  • Net Volume Per Sub (Measurement for the outer dimensions of the box less the thickness of the wood): 1.25 Cubic Feet
About Rockville Quality ControlProcedures:

The Rockvillebrand stands for Quality, Innovation and Value. All Rockville productsgo through the most rigorous quality control standards in the industry.Products go through months of extensive testing before they reach yourhands. All user functions are tested and all internal components aretested for quality. Rockville makes products that are virtuallyun-breakable! Rockville is one of the only brands in its class to testevery concept model for weeks or months before starting production. Onceproduction begins, Rockville sends product engineers to their factoryto quality control every line of production. During production everyproduct is tested and on top of that Rockville goes the extra mile andhas their high level product engineers do an additional quality control.They test a certain percentage of all products from the production linea second time to ensure that the quality meets their vigorousstandards, and to make sure that there is never a batch of products witheven a slight problem. All Rockville sub enclosures are backed with afull 90 day warranty, though it is unlikely that you will needto use it.

Video of RWK01:


The Rockville RWK01 0 AWG (American Wire Gauge) amp kit has the following differences over other amp kits on the market at this price point.

1. Our RCA cables are 100 % copper. These are top of the line RCA cables

2. Better Resistance: The only thing that really matters with wires is the resistance rating. This is a measurement of conductivity and how much signal is loss per foot of wire. Since Rockville wires are made with around 3 times as much copper as any other wire at this price point, these wires had a much better resistance rating which means they will transfer more power to your amps than the other brands.

3. We do not cheat you on the thickness of the wire. These are standard American wire gauge thickness. This is another reason our conductivity is better than anything else at this price point. Other brands in the market place write 4 gauge, but cheat you on the thickness. We are honest about the thickness.

4. The Rockville amplifier installation kits feature a new soft abrasion proof insulating jacket. This rugged PVC outer jacket allows for 100% improved flexibility over standard power cables making them extremely easy to route through your vehicles interior, and it maintains exceptional resistance to grease and oil. The PVC outer jacket can with-stand an extreme temperature range of -40 to 220 degrees F.


  • Rockville RWK01 0 AWG (American Wire Gauge) Complete Car Amp Installation Wire Kit
  • 17’ – 0 Gauge Translucent Blue SuperFlex Power Cable
  • 3’ – 0 Gauge Translucent Black SuperFlex Ground Cable
  • Gold Plated ANL Heat Resistance Fuse Holder
  • 200 Amp ANL Gold Plated Fuse
  • 1 – 17’ High Grade Twisted Pair of RCA Interconnects
  • 25’ Translucent Blue Speaker Wire
  • 7’ Split Loom Tubing
  • 17’ Amplifier Remote Turn On Cable
  • Wire Ties and Ring Terminals, and all other accessories you need for a clean installation
  • Soft abrasion proof insulating jacket allows for 100% improved flexibility
  • PVC outer jacket can with-stand an extreme temperature range of -40 to 220 degrees F
  • UPC:
  • 613816144563

Free shipping to the 48 continental USA only. Orders placed by 1:00 EST will ship same day.
Back to links