- (2) Rockville DWB80S Dual 8" Silver 800 Watt Marine Wakeboard Tower Speaker System
- (1) Rockville RXM-T2 Micro 2400w 2 Ch Marine/Boat Class D Amplifier 2x600W CEA Rated
- (1) MB QUART N1-WBT Marine Waterproof Wired Bluetooth Boat ATV Preamp Controller
- (1) Rockville RMWK4 4 AWG Waterproof Marine/Boat Amplifier/Amp Installation Wire Kit
Video of DWB80S:
What's Included:
- Dual 8” marine wakeboard tower speaker
- Mounting brackets and mounting hardware
- Integrated grill
- Installation hardware
The DWB80S dual wakeboard tower speaker by Rockville is the next evolution in our ever expanding line of quality marine audio gear. You get a dual speaker each equipped with a 1” titanium tweeter and an 8” woofer. This speaker can handle 400 watts RMS & 800 watts peak! These speakers are rated with true world RMS ratings (No exaggerated power ratings like other brands).
Rockville engineers care about quality and sound more than anything else. The DWB80S was designed using a molded heavy duty ABS enclosure. This enclosure is indestructible! We've jumped on it, hit it with a sledge hammer, and tossed it around with no harm done. This is the strongest ABS wakeboard tower pod on the market. The 1” titanium tweeters really make these stand out. The highs on these speakers are crisp, clear, and extremely loud! The polypropylene woofer cone is reliable and sounds great. This material is used on most of the top speakers on the market. We use rubber surrounds on these to eliminate unwanted distortion. In addition, rubber is an extremely waterproof material. A long excursion woofer makes for low end bass and mids that truly make these speakers stand out.
We’ve added a new and improved nylon mounting bracket. Nylon is strong, light weight, and can withstand the toughest conditions. The bracket features a special UV coating to protect it from the elements. A 360° rotating mechanism built into the bracket allows you to position the speaker in any direction for optimum listening enjoyment. This also gives you the ability to rotate the speaker to the front or rear of your boat for different applications. Rubber fitment inserts give you the ability to mount this speaker to wake board towers and roll cage bars of varying thicknesses.
We use only marine grade components and materials making these speakers truly waterproof. They will not get damaged by fresh water, salt water, or moisture. In addition, the quick connect terminals are made out of stainless steel and they are completely rustproof. These can withstand all elements on the water for a lifetime of worry free use. In addition to wakeboard towers on boats, we found that these are perfect for installing in Jeeps, ATVs, and UTVs.
Features:
- Rockville DWB80S Dual 8" Silver Wakeboard Tower Speaker
- Peak Power Handling: 800 Watts
- RMS Power Handling: 400 Watts
- CEA 2031 Compliant
- Frequency Response: 40Hz – 20KHz
- Sound Pressure Level: 91dB @ 1w/1m
- Impedance: 4 Ohms
- Heavy Duty ABS enclosure
- Adjustable Nylon Mounting Bracket
- Quick and Easy Speaker Angle Adjustment
- Bracket rotates 360°
- 1" Titanium Dome Tweeter
- Built-In Two-Way Crossover Network
- Fully Marinized Against Salt & Fresh Water Conditions
- Completely Resistant to Water, Rust, and UV Rays
- Terminals Are Sealed with Rubber Gaskets
- Specially Tuned for PA Voice Over
- Polypropylene Mica Injected Cone with Rubber Surround
- High BL Magnet Motor Structure
- 20 oz High Density Magnets
- Oversized 1.25” Kapton Voice Coil
- CE and RoHS Certified
- Large mounting screw accommodates roll bars found on many off road vehicles such as Jeep Wranglers, ATVs, and UTVs.
- Dimensions (H x W x D): 13.4" x 22.7" x 11.4"
- Color: Silver
Videos of RXM-T2:
The RXM-T2 is part of the Rockville proton series. This is one of the most durable marine amps in the world. It is completely water resistant! It is protected from rain, moisture, splashing, heat, cold, saltwater, vibrations, the sun, and anything else you will throw at it! The small footprint makes this durable so you can mount the amplifier even in the tightest locations. The other thing that makes this amp so durable is that it is a class "D" power supply. So even if you run it at a really low impedance the amplifier can handle it! The amp is efficient and does not generate a ton of heat. So even if you abuse the amplifier and run it at 1 ohm load in stereo mode or a 2 ohm load in bridged mode; the amplifier will handle it! (We tested it).
Warning: This amplifier produces insane power! We do not want you to blow your speakers. Do not under-estimate this amplifiers' capability! If you are using this amplifier for 2 or 4 full range speakers, then please install with the gain level down all the way and then crank it up very slowly to protect your speakers from blowing. The reason we created this amplifier with so much power capability is for 2 reasons. One reason is to make it capable for powering lots of speakers per channel. Secondly was to give you enough headroom on the amplifier so you do not have to crank the gain all the way up all the time. This headroom ultimately will increase the sound quality like crazy!
The RXM-T2 is rated at 1200w RMS, but we totally underrated these! We just got new test reports back from our QC department showing this amp outputting a legitimate 1600w RMS when bridged! This amp performs at 600 x 2 @ 2 ohms RMS and when you bridge it you get 1600 x 1 @ 4 ohms! (To get even more power you can run it at 1 ohm in stereo mode and 2 ohm in bridged mode). This is a full range class "D" amplifier. It is super-efficient. The ratings are more than legit. They are actually under-rated.. This amp is CEA compliant. I invite you to test them and write a review when you are done testing.
We will offer a 90 day money back guarantee. If you are not happy with the output power or sound quality, we will call tag the amp back and give you all your money back!
One of the tricks to determine the real power of a car amplifier is to multiply the fuse rating by 10 to determine the true RMS power. This formula almost always works within 20 %. RXM-T2 has (3) 35 Amp fuses. This amplifier will also go louder than most amps with this same fuse rating due to how efficiently it runs.
I wanted to take a second and talk about the waterproofing process we use on this amplifier. We use a chemical compound which includes Acrylate Acid, Silicone, Polyurethane, and a few other substances. When these chemicals solidify, it becomes a protective on the PCB. This is what we call a conformal coating. This makes the amplifier water resistant. It also prevents oxidization and protects the amplifier from moisture. There are 3 ways manufacturers can conformally coat a PCB board. Soak, paint, or spray. Once we finish building the PCB board we paint it with our conformal coating.
There is really no amplifier on the market that sounds this good and has this much output power at this price point.
Features:
- Rockville RXM-T2 Micro Class D Marine Amplifier
- Full-Range Class D Amplifier Architecture
- CEA Compliant Power Ratings:
- 800 Watts (2 x 400 Watts) at 4 ohms and 1% THD+N
- 1200 Watts (2 x 600 Watts) at 2 ohms < 1% THD
- 1600 Watts (1 x 1600 Watts) bridged @ 4 Ohms < 1% THD
- Peak Power Ratings: 2400 Watts: (2 x 1200 Watts) @ 2 Ohms and (1 x 2400 Watts) @ 4 Ohms bridged
- Fully marine grade amplifier with conformal-coated PCB board
- Protected from moisture, saltwater, UV, bumps, vibrations, heat, cold, and more
- Double Sided Surface Mount (SMD) PCB Design
- High-Speed MOSFET Power Supply
- Studio-Grade Bipolar Output Stage Transistors
- 2-Ohm Stable Stereo
- 4-Ohm Mono Bridgeable
- Mute and Delay Soft Start System
- Full IC-Controlled Protection Circuitry
- RCA Preamp Line Output
- Status Mode LED Indicator
- 8 Volt Preamp Circuitry
- 4 Gauge Lucite Encapsulated Power/Ground Terminals
- 12 Gauge Lucite Encapsulated Speaker Terminals
- Fully Adjustable 12dB / Octave Crossover
- Low Pass 50Hz - 250Hz
- High Pass 50Hz - 250Hz
- Fully Adjustable 12dB Bass Equalizer with Differential Circuitry
- Minimum THD at Rated Power: < 0.05%
- Frequency Response: 15Hz - 20KHz
- S / N Ratio: 100dB
- S/N Ratio: >97dB
- Damping Factor: > 200 @ 100Hz
- 3 x 35 Amp Fuses
- Dimensions: (W x H x L) 6.7" x 1.98" x 12.25"
Authorized MB Quart Dealer!
A high-end sound, marine certified waterproof wired bluetooth preamp controller for boats, off-road vehicles or project vehicles audio installation needs. With simple audio outputs to connect to an amplifier the N1-WBT allows simple installation to play music via any Bluetooth enabled device.
Features:
- MB QUART N1-WBT Marine Waterproof Wired Bluetooth Boat ATV Preamp Controller
- Source Type: Waterproof wired bluetooth preamp controller
- Input Types: Bluetooth
- Control Buttons: Large, Waterproof - Play/Pause, Tracks Forward/Back, Volume Up/Down and Power On/Off
- Bluetooth™ Connect allows your phone or other Bluetooth enabled device to be quickly paired to the controller without a complicated pairing process
Specifications:
- Bluetooth Range: 32' (10 Meter)
- Pre-amp Outputs: 1
- Pre-amp Voltage: 2v
- Controller Dimensions: controller 2" (4.8cm) round
- Dimensions Mounting Hole: 0.8" (2.2cm)
- Dimensions Mounting Depth: 0.8" (2.2cm)
- Weight: 5oz (0.01K)
Advantages of purchasing from an authorized seller:
- Best prices - We sell all MB Quart Products at the lowest price as possible.
- Full Factory Warranty
- Detailed information of all products
- Lifetime Customer Service by MB Quart product Experts
- Guaranteed legitimate and authentic merchandise
Please note: If you purchase MB Quart from an un-authorized seller then you are taking a big risk. You will not have any manufacturers warranty, and there is no guarantee that the item is authentic, brand new, or even working.
Video of RMWK4:
Unboxing Video of RMWK4:
Rockville's exclusive Professional Marine Installation Kit features top of the line accessories which have been specifically engineered to withstand the toughest of marine environments. You will hear the difference and we guarantee you will not be disappointed!
Rockville Marine Audio Interconnect cables are specifically engineered to withstand the challenges of both salt water and fresh water marine installations. The utilization of tinned Oxygen Free 100% copper conductors with polyethylene dielectrics in a twisted-pair arrangement optimizes noise rejection. The small-diameter white PVC jacket is ultra-flexible enabling our cables to be easily routed around bends and through tight spaces. Our exclusive molded connector features a water proof inner cap that is heat shrunk in place over all solder connections thus guaranteeing a completely water proof and corrosion resistant connection. The locking plug design with split pin technology further insures tight connections that will not vibrate free even during the most extreme boating maneuvers.
Our Marine Grade Speaker Cables are engineered for maximum signal transfer with minimum impedance loss. The cable strands are all individually tinned, fine-strand, oxygen-free copper with aluminum composite construction and provide a high-fidelity speaker connection that is especially engineered for the marine environment. Woven down to a flat shape, the cables can be easily routed throughout the bulkhead with ease.
Rockville Marine Power Cables feature strands which are all individually tinned, fine-strand, oxygen-free copper with aluminum composite construction corrosion resistant and marine-ready. Fine-strand construction and soft PVC jacket deliver excellent flexibility. Our marine cables are much better quality than standard CCA wire kits. These kits have a very generous amount of copper in them. They are very similar in quality to the best brands kits on the market. The thickness of the wire is true-gauge. We have seen other brands who use thick plastic but very little copper inside the wire. Rockville wires are honest, true-to-spec and will make your music sound great.
Features:
- Rockville RMWK4 4AWG Guage Waterproof Marine/Boat Amplifier Wire Installation Kit
- 25’ Translucent, Twisted Pair, High Quality, Tinned-CCA Flexible PVC RCA Cable
- 20’ 4 Gauge High Current, Low Impedance, Clear Flexible Power Cable with 3’ Black Poly Woven Mesh to better resist chemicals in the battery compartment
- 4’ 4 Gauge High Current, Low Impedance, Light Blue, Flexible Ground Cable
- 25’ 16 Gauge 100% Tinned-OFC, White, Non-Transparent Resin PVC, Flat Speaker Cable
- 20’ Blue Remote Wire
- 1PC Silver Mini-ANL Fuse Holder – Clear Shell and Clear Blue Bottom Bracket with Blue Waterproof Ring
- 1PC 60A Mini-ANL Fuse
- 2PCS Ring Terminals
- 2PCS Spade Terminals
- 5PCS Speaker Cable Terminals
- 1PC Washer
- 10PCS White Cable Ties
- UPC:
- 613815959755
