null
  • 90 Day Hassle Free Returns
  • Free Same Day Shipping
  • Expert Advice
  • Lowest Price Guarantee

(2) Autotek ATK12D4 12" 400w RMS DVC 4 Ohm Car Subwoofers+Mono Amplifier+Amp Kit

SKU:
(2) ATK12D4+RXD-M0+RWK81
$408.97 $189.95
(You save $219.02)
(No reviews yet) Write a Review
Enter your email address to be notified when this item is back in stock.
Condition:
New
KITCOMPONENTS:
, 974, 1444
Custom_Condition:
BRAND NEW IN ORIGINAL PACKAGING
Bundle:
Yes

Warranty Information:

1 YEAR

New orders ship within 1-2 business days.

Call for Expert Advice
Call now: 1-646-758-0144

Package Includes:
  • (2) Autotek ATK12D4 12" Car Audio Subwoofer 800 Watt Peak/400w RMS Sub DVC 4 Ohm
  • (1) Rockville RXD-M0 1200 Watt Peak/300w Dyno-Certified RMS Mono 1 Ohm Amplifier Car Audio Amp
  • (1) Rockville RWK81 8 Gauge Complete Amp Installation Wire Kit with 100 % Copper RCA

Description:

Autotek ATK12D4 subwoofer with dual 4 Ohm design delivers 800 watts and features heavy gauge, powder-coated, stamped steel basket.

Features:

  • Terminal Type
    Spade style terminals for easy installation
  • Configuration
    Round
  • Surround / Cone Coupling
    The pressure treated foam surround along with the poly cotton spider helps keep the piston motion of the subwoofer linear and distortion free.
  • Voice Coil / Former Assembly
    Vented aluminum former holds a 2" voice coil while allowing the heat to be exchanged. (Less heat means less distortion)
  • Spider
    Poly cotton spider, along with the surround, allows the woofer to handle more power with minimum distortions.
  • Frame / Venting
    Heavy duty powder coated steel frame allows back venting, which exchanges heat with cool air, resulting in more power handling and increased reliability.
  • Motor
    Vented high energy motor assembly with heavy duty magnets increases power handling and increases SPL.

Specifications:

  • Subwoofer Configuration: Round
  • Subwoofer Voice Coils: 2
  • Subwoofer Impedance (ohms): 4 ohms x 2
  • Subwoofer RMS Power Handling (watts): 400
  • Subwoofer Peak Power Handling (watts): 800
  • Subwoofer Cut-Out (in): 10.94
  • Subwoofer Mounting Depth (in): 5.61
  • Subwoofer Outside Diameter (in): 12.25
  • Subwoofer Mounting Height with Grill & Gasket (in): N/A
  • Subwoofer Sensitivity (1 watt/1 meter): 86dB
  • Subwoofer Enclosure Recommendation: Small Sealed or Medium - Large Vented

Dimension:

  • Item Weight (lbs): 7.1
  • Item Length (in): 12.25
  • Item Width (in): 12.25
  • Item Height (in): 5.61

Proposition 65 Notice

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov


Videos of RXD-M0:



Description:

Over the years, the technology used to create audio amplifiers has grown by leaps and bounds. We consider it our mission to use our expertise in developing the latest technologies and to bring you the absolute best sounding amplifiers on the market and of course at a reasonable price. From its clean, sleek design to its high quality components, you will be amazed at the quality and power that these new Phenom amps offer.

The RXD-M0 is a mono amplifier with 1,200 watts peak output and 300 watts Dyno Certified power.Here at Rockville we offer the best value in car audio. We therefore want to make it easy for you to compare our products to any brands on the market. The peak rating can be used to compare with brands who use peak ratings such as Boss and Power Acoustik while the Dyno Certified RMS rating can be used to compare with top brands such as Kicker, Rockford, Alpine, etc.

One of the tricks to determine the real power of a car amplifier is to multiply the fuse rating by 10 to determine the true RMS power. This formula almost always works within 20 %. RXD-M0 features a Maxi fuse with a rating of 50 Amps. Compare this to other amps on the market with similar fuse ratings and you’ll see that with the RXD-M0 you are getting your money’s worth and then some.

This unit also features a high speed MOSFET power supply and studio-grade bipolar output stage transistors. It has a fully adjustable 12dB/Octave cross over with differential circuitry. Other features include a subsonic filter, a fully adjustable bass equalizer, mute and delay soft start technology, a phase control switch, and a dashboard subwoofer control for added convenience. The RXD-M0 is protected by a full IC controlled circuit and has professional peak limiter circuitry guaranteeing distortion free musical playback at all levels.

The RXD mono amplifiers took years of engineering. A lot of new technology went into these amps. We call this technology optical coupler Class-D. This new technology gives the amplifier punchier bass compared with a typical class “D” amp. A major difference in our OC technology is the preamp input stage and output stage are separated in circuitry. It is less susceptible to noise, which typically is picked up from the preamp input. The RCA input accepts both balanced and un-balance inputs. If there is potential inference in the car, the balanced input signal is less susceptible to noise.

The Phenom amps by Rockville use only the top parts. We use Siemens correction capacitors which are well-known for producing crystal clear sound quality. We use TL072 OP (power supply) which is composed of mosfets. Typical class “D” amps use JRC4558, which is composed of transistors only. Mosfet power supplies have a higher speed, lower loss rate, lower noise, and ultimately supply more efficient and clean power along with lower THD (distortion). We redesigned the layout of the PCB boards to allow the amp to run smooth and cool. Each and everything amplifier we manufacture is tested twice. Once at the semi-finished PCB stage of production and then another test is done at the final assembly. We also run age tests on them. After this is all done, we hire a 3rd party independent company unaffiliated with our factory or with us to go to the factory and do random inspections of the power and over 20 other tests. We guarantee these amps will satisfy you. We are so confident in your satisfaction of this amplifier that we will offer you a 90-day money back guarantee. This means if for any reason you want to return the amplifier back and get a full refund we will send you a label and take the amp back and give you all your money back. (Amp must be complete along with the box).

Features:

  • Rockville RXD-M0 1200 Watt Peak/300w Dyno-Certified RMS Mono 1 Ohm Amplifier Car Audio Amp
  • Dyno Certified RMS Power Ratings: (Certified Dyno Test / Less than 1 % THD) (Use these ratings when comparing with top brands such as Kicker, Rockford Fosgate, etc)
    • 1 Ohm : 300 Watts x 1 Channel <1% THD+N
    • 2 Ohm : 200 Watts x 1 Channel <1% THD+N
    • 4 Ohm : 150 Watts x 1 Channel <1% THD+N
  • Peak: (Use these ratings when comparing with the top budget brands such as Boss, Power Acoustik, etc)
    • 1 Ohm : 1200 Watts x 1 Channel
    • 2 Ohm : 800 Watts x 1 Channel
    • 4 Ohm : 600 Watts x 1 Channel
  • High-Speed MOSFET Power Supply
  • Optical Coupler Class “D” Technology
  • Studio-Grade Bipolar Output Stage Transistors
  • Now exclusively with “Professional Peak Limiter Circuitry” which guarantees distortion free musical playback at all levels.
  • Fully Adjustable 12dB / Octave Crossover with Differential Circuitry
  • Low Pass Filter : 50Hz - 250Hz
  • Subsonic Filter : 15Hz - 55Hz
  • Phase Control Switch
  • Full IC-Controlled Protection Circuitry
  • Remote Dashboard Subwoofer Control
  • Fully Adjustable 12dB Bass Equalizer
  • Mute and Delay Soft Start System
  • RCA Preamp Line Output
  • 8 Volt Preamp Circuitry
  • Status Mode LED Indicator
  • Minimum THD at Rated Power : < 0.05%
  • S / N Ratio : >100dB
  • Frequency Response : 10Hz - 500KHz
  • Damping Factor : > 200 @ 100Hz
  • 50 Amp Maxi Fuse
  • Dimensions : (W x H x L) 9.5" x 2" x 8.75"

Owner’s Manual


Video of RWK81:



Description:

The Rockville RWK81 8 AWG (American Wire Gauge) amp kit has the following diferences over other amp kits on the market at this price point.

1. Our RCA cables are 100 % copper. These are top of the line RCA cables

2. Better Resistance: The only thing that really matters with wires is the resistance rating. This is a measurement of conductivity and how much signal is loss per foot of wire. Since Rockville wires are made with around 3 times as much copper as any other wire at this price point, these wires had a much better resistance rating which means they will transfer more power to your amps than the other brands.

3. We do not cheat you on the thickness of the wire. These are standard American wire gauge thickness. This is another reason our conductivity is better than anything else at this price point. Other brands in the market place write 8 gauge, but cheat you on the thickness. We are honest about the thickness.

4. The Rockville amplifier installation kits feature a new soft abrasion proof insulating jacket. This rugged PVC outer jacket allows for 100% improved flexibility over standard power cables making them extremely easy to route through your vehicles interior, and it maintains exceptional resistance to grease and oil. The PVC outer jacket can with-stand an extreme temperature range of -40 to 220 degrees F.

The RCA signal transfer cables included in this kit feature blue and silver twisted pair technology in a clear outer jacket insulation skin. Not only do the blue and silver wires look cool but they also provide superior signal transfer with maximum noise suppression. They are 100% copper to provide absolute lossless perfect signal transfer to your receiver. This technology reduces interference, so your audio signal flows clean and pure at all power levels.

This kit also includes a massive 60 Amp AGU Gold Plated Fuse, so you can be sure it will handle the all the DC power that your amp will need without even the slightest loss of current. The included 7 split loom tube provides protection for your power cable from the typically harsh environment found under the hood of your car.

Audiosavings product experts have tested this amp kit against many leading amp kits on the market and were were impressed not only by the great looks but by the quality of these Rockville installation kits as well. These kits had a lower resistance rating than the other brands we compared and tested them against. What this means is that Rockville manufactures their kits with more copper than other kits at this price point, ultimately providing your amplifiers with better and cleaner DC power, so they work cooler and more efficiently. You will hear the difference a Rockville installation kit will make!

One other last thing worth noting about our kit compared to others. Our kit cosmetically looks the best. It has blue power wire, clear ground wire, and twisted pair RCAs with matching colors. This model includes (1) sets of RCA cables.

Features:

  • Rockville RWK81 8 Gauge 2 Channel Car Amplifier Wiring Installation Kit
  • (1) 17’ High Grade Twisted Pair of 100% Copper RCA Cable
  • 17’ 8 Gauge Translucent Blue Super Flex Power Cables
  • 17’ 18 Gauge Blue Remote Cable
  • 17’ 16 Gauge Clear Speaker Wire
  • 3’ 8 Gauge Super Flex Ground Wire
  • Gold Plated AGU Heat Resistant Fuse Holder
  • 60 Amp AGU Gold Plated Fuse
  • 7’ Split Tube Loom
  • Accessories Included: Wire Ties, Ring Terminals, Butt Connectors, Spades, and Grommets
  • Soft abrasion proof insulating jacket allows for 100% improved flexibility
  • PVC outer jacket can with-stand an extreme temperature range of -40 to 220 degrees F

The Rockville Difference:

Whenever you see the Rockville shield on a product you know that it has the stamp of approval. While other companies simply import products from China, Rockville manufactures the products in China to lower your cost but do so under American style supervision and quality standards to get you that USA quality that you want!

About Rockville Quality Control Procedures:

The Rockville brand stands for Quality, Innovation and Value. All Rockville products go through the most rigorous quality control standards in the industry. Products go through months of extensive testing before they reach your hands. All user functions are tested and all internal components are tested for quality. Rockville makes products that are virtually un-breakable! Rockville is one of the only brands in its class to test every concept model for weeks or months before starting production. Once production begins, Rockville sends product engineers to their factory to quality control every line of production. During production every product is tested and on top of that Rockville goes the extra mile and has their high level product engineers do an additional quality control. They test a certain percentage of all products from the production line a second time to ensure that the quality meets their vigorous standards, and to make sure that there is never a batch of products with even a slight problem. All Rockville products are backed with a hassle free warranty, though it is unlikely that you will need to use it.

Great features and great quality make Rockville a great choice.
1 YEAR
  • UPC:
  • 613817036027

Car Subwoofer Impedance Wiring Guide

Use our car subwoofer and amp wiring diagrams to figure out which amplifier is compatible with your subwoofer(s) and how to wire it properly.

New orders ship within 1-2 business days.
Back to links