Package Includes:

• (2) Kicker 10" Car Subwoofers
• (1) Rockville Dual 10” Vented Square Sub Enclosure
• 20 Drywall Wood Screws (Wood screws are the type of screws; the screws are actually made of metal)
• 20 Feet of 14 AWG Blue Speaker Wire
• 4 Spade Terminals

---

Authorized Kicker Dealer!

Description for Kicker Subs:

Square Matters
The Solo-Baric's cutting-edge, square-sub design means more cone area, more air displacement and more volume than a round woofer.

Features:

• Kicker L7S104 10" 1200 Watt Solobaric L7S Car Subwoofer Solo-Baric 44L7S10-4 
• Dual Four-Ohm Voice Coils
• Injection-Molded Polypropylene Cone
• Patented Corner Ribs Minimize Distortion
• SoloKon™ 360-Degree Back Bracing
• Ribbed Santoprene Surround With Blue Surround Stitching
• UniPlate&trde; Back Plate And Pole Piece, Plus Perimeter Venting For Excellent Thermal Management
• Thick Tinsel Leads
• Large Ceramic Magnet
• Cast Aluminum Basket
• Satin-Nickel Plated, Spring-Loaded Speaker Terminals
• The Solo-Baric L7S 10-Inch Subwoofer works best with a sealed or ported enclosure and 600 watts of recommended power. See below for more details.

Specifications:

• Size: 10" (25.4 cm)
  
• Impedance: 4 Ohms DVC
  
• Max Rec Amplifier Power: 1200 Watts Peak / 600 Watts RMS
  
• Sensitivity: 86.8 dB 1w/1m
  
• Frequency Response: 24Hz - 100Hz
  
• Mounting Depth: 6-1/4" (15.9 cm)
  
• Mounting Cutout, Square: 9-5/16" (23.7 cm)
  
• Min Rec Sealed Box Volume: 0.66 cu. ft. (18.7 liters)
  
• Max Rec Sealed Box Volume: 1.0 cu. ft. (28.3 liters)
  
• Min Rec Vented Box Volume: 1.25 cu. ft. (35.4 liters)
  
• Max Rec Vented Box Volume: 2.25 cu. ft. (63.8 liters)

---

 

Description for Rockville Enclosure:

The RDVK10 dual 10" vented speaker box is made in the USA with Grade “A” ¾” MDF wood. This enclosure is made with precision cutting machinery by industry experts that have been making these enclosures in the USA for over 20 years. All Rockville enclosures come with a customized enhanced glue that is unmatched by any other manufacturer. That means that the carpet will stay in place and not rip or tear. The ¾” USA MDF is much stronger then any type of import wood. This will keep your box performing at an optimal level by not flexing and distorting your woofers. Your woofers will thank you! EVERY Rockville enclosure is not only glued at all joints but stapled as well. If that wasn’t enough we add a layer of silicon to every seam! This makes your Rockville enclosure rock even more!
 
 MADE IN THE USA WITH PRIDE!

Features:

• Rockville RDVK10 Dual Square 10" 1.2 Cu. Ft. Vented Subwoofer Enclosure
• Designed Specifically For The Solo Baric L7/L5/L3 Series Subwoofers and Similar
• Proudly Made In The USA, Using Only The Finest Quality Materials - For The Best Level of Performance From Your Subs!
• 3/4" USA Heavy Duty MDF Construction
• Machine precision cut mounting holes
• Top of the line Glue for extra durable adhesion
• Designed, tested, and engineered to work with most of today’s popular woofers. These enclosures are built with the quality additives needed to maximize the performance of any sound system.
• Tuning frequency: 42Hz

Enclosure Measurements:

• Type of Enclosure: Vented
• Enclosure Sub Size: Dual 10" Square
• Dimensions in Inches: 32" Width x 14.5" Depth x 12" Height
• Top and Bottom Depth: 14.5"
• Mounting Depth: up to 13.75" (enough depth for any sub on the market)
• Gross Volume Per Sub (Measurement for the outer dimensions of the box): 1.6 Cubic Feet
• Net Volume Per Sub (Measurement for the outer dimensions of the box less the thickness of the wood): 1.2 Cubic Feet

---

Complete Dual Subwoofer Enclosure Installation Kit!

Includes:

• 20 Drywall Wood Screws (Wood screws are the type of screws; the screws are actually made of metal)
• 20 Feet of 14 AWG Blue Speaker Wire
• 4 Spade Terminals

This accessory package includes everything you need to install two subwoofers into an enclosure, and wire your enclosure to your amplifier.  This package is a top of the line accessory package which we put together and tested. 

The drywall wood screws were hand selected by our installation experts because they drill into the enclosure very cleanly, without chipping the enclosure.  The speaker wire is 14 gauge.  This is way better than using 16 gauge.  You can be 100 % sure that your enclosure will have a clean signal to the amplifier with this top of the line speaker wire.  These spade terminals have also been hand selected by our installation experts to make the internal wiring simple, secure, and to run the audio signal cleanly.