Package Includes:
- (2) Kicker 10" Car Audio Subwoofers
- (1) Rockville Dual 10" 1.1 cu.ft. Vented Sub Enclosure Box
- (1) Kicker 43CXA3001 300 Watt RMS Mono Class D Car Stereo Amplifier
- (1) Kicker 09DPK8 8 AWG Gauge Car Amp Wire Kit
- 20 Drywall Wood Screws (Wood screws are the type of screws; the screws are actually made of metal)
- 20 Feet of 14 AWG Blue Speaker Wire
- 4 Spade Terminals
Authorized Kicker Dealer!
Description for Kicker Subs:
The 2016 Comp 10-Inch Subwoofer comes with a single 4-Ohm terminal. The powerful KICKER Comp sub delivers both convenience and raw power - all in the one package. The 2016 Comp Subwoofers give you deep bass and a great value. The Comp 10-Inch works best with 150 watts of recommended power.
Features:
- KICKER 43C104 Comp 10" 300 Watt SVC 4-ohm Car Audio Subwoofer
- Size: 10 inches (25.0 cm)
- Impedance: 4 ohms SVC
- Max Rec Amplifier Power:*
....300 Watts Peak
....150 Watts RMS - Recommended power range: 50 - 150 watts RMS
- Injection molded SoloKon cone
- Optimized Polyfoam Ribbed Surround
- Extremely rigid cone, along with 360 degree back bracing eliminates distortion
- Double stitched surround for enhanced durability
- Tinsel leads woven into the spider with Kicker's Spiralead technology
- Single high-temperature voice coil
- 45oz. Magnet structure
- Sensitivity: 86.2 dB 1w/1m
- Frequency Response: 30-500 Hz
- Mounting Depth: 5-1/16 inches (12.8 cm)
- Mounting Cutout: 9-1/8 inches (23.1 cm)
- Min Sealed Box Vol: 1.0 cu. ft (28.3 L)
- Max Sealed Box Vol: 2.4 cu. ft (68 L)
- Min Vented Box Vol: 1.25 cu. ft (35.4 L)
- Max Vented Box Vol: 1.75 cu. ft (49.6 L)
*Assumes typical music program with minimal amplifier clipping; varies with enclosure size.
Description of 43CXA3001:
The CXA 300.1 Mono Amplifier is a small, yet powerful and affordable amp. Using a Class D power plant, this amp features a variable bass boost with KickEQ™, giving you as much as a 12dB of extra bump. A powerful 12dB crossover is included, letting you quickly tune your system to perfection. Use the full range outputs to expand your system with other bass amps, or a full range amp to complete your system. This CXA amplifier delivers 300 Watts RMS at 2 Ohms. This amp reaches massive power levels thanks to an optimized circuit layout and the highest-grade internal components available. Highly efficient heat sinks keep the amp cool with a sophisticated new look.
Features:
- Kicker 43CXA3001 CXA300.1 300 Watt RMS Mono Class D Car Amplifier
- RMS Power Rating:
.....4 ohms: 150 watts x 1 chan.
.....2 ohms: 300 watts x 1 chan. - Peak power output: 600 watts
- Pulse Width Modulated MOSFET power supply
- Kicker CXARC wired remote bass level control available and sold separately
- LED power (green) and protect (red) indicators
- Soft start turn-on
- Mono channel operation
- Speaker-level (high-level) inputs via RCA (Requires Kicker KISL, available and sold separately)
- Preamp RCA outputs to daisy chain multiple amps
- 3-way protection circuitry (thermal, overload, and speaker short protection)
- Dual speaker terminals simplify the hookup of multiple speakers
- 8-gauge power and ground leads and a 40-amp fuse recommended (Not include in this amplifier)
- Input sensitivity: Low level: 125mV-5V ; High level: 250mV-10V
- Frequency Response: 25 - 200Hz
- Signal to Noise Ration: >95dB
- Variable Low-Pass Crossover: 50 - 200Hz 12dB/octave
- Variable Bass Boost: 0 to +12 dB bass boost at 40 Hz
- Fixed Subsonic Filter @ 25hz, 24db/octave
Description of 09DPK8:
Direct-Connectinstallation components transfer the highest current possible with thefewest connections, giving you an ultra-clean and super-reliable system.Included in the kit are power cable, ground cable, fuse holder, systemfuses and more - all Direct-Connect engineered to work together.
Amplifier Kit Features:- Kicker 09DPK8 8 Gauge D-Series Power/Ground Amplifier Wire Kit
- Hyper-Flex™ and Direct-Connect™ engineering
- Power and ground, fuse holder and fuses, turn-on wire and connectors
- One additional year of KICKER amplifier warranty if purchased with the amp
- Designed for car audio systems totaling up to 400 watts RMS
- 100% oxygen-free copper for maximum, uninterrupted signal transfer
- AFS Fuse holder protects high powered audio systems
Complete Amp Kit Includes:
- 17 ft. (5.2m) Red 8 AWG power wire
- 3 ft. (0.9m) Black 8 AWG ground wire
- 17 ft. (5.2m) Blue 18 AWG remote lead wire
- 1 Kicker 09AGU Fuse holder with a 50 amp AFS fuse
- Black zip ties
- 2 Red butt connector
- Black rubber firewall grommet
Description for Rockville Enclosure:
The RDV10 dual vented speaker box is made in the USA with Grade “A” ¾” MDF wood. This enclosure is made with precision cutting machinery by industry experts that have been making these enclosures in the USA for over 20 years. All Rockville enclosures come with a customized enhanced glue that is unmatched by any other manufacturer. That means that the carpet will stay in place and not rip or tear. The ¾” USA MDF is much stronger then any type of import wood. This will keep your box performing at an optimal level by not flexing and distorting your woofers. Your woofers will thank you! EVERY Rockville enclosure is not only glued at all joints but stapled as well. If that wasn’t enough we add a layer of silicon to every seam! This makes your Rockville enclosure rock even more!
MADE IN THE USA WITH PRIDE!
Features:
- Rockville RDV10 Dual 10" Vented Subwoofer Enclosure
- Proudly Made In The USA, Using Only The Finest Quality Materials - For The Best Level of Performance From Your Subs!
- 3/4" USA Heavy Duty MDF Construction
- Machine precision cut mounting holes
- Top of the line Glue for extra durable adhesion
- High quality GOLD spring loaded terminals
- Designed, tested, and engineered to work with most of today’s popular woofers. These enclosures are built with the quality additives needed to maximize the performance of any sound system.
- Tuning Frequency: 42Hz
Enclosure Measurements:
- Type of Enclosure: Vented
- Enclosure Sub Size: Dual 10"
- Dimensions in Inches: 14.25" L x 32" W x 12 H"
- Top and Bottom Depth: 14.25"
- Mounting Depth: up to 15" (enough depth for any sub on the market)
- Port Dimensions: 2" x 18.5" x 10.5"
- Gross Volume Per Sub (Measurement for the outer dimensions of the box): 1.61 Cubic Feet
- Net Volume Per Sub (Measurement for the outer dimensions of the box less the thickness of the wood and port): 1.1 Cubic Feet
The Rockville brand stands for Quality, Innovation and Value. All Rockville products go through the most rigorous quality control standards in the industry. Products go through months of extensive testing before they reach your hands. All user functions are tested and all internal components are tested for quality. Rockville makes products that are virtually un-breakable! Rockville is one of the only brands in its class to test every concept model for weeks or months before starting production. Once production begins, Rockville sends product engineers to their factory to quality control every line of production. During production every product is tested and on top of that Rockville goes the extra mile and has their high level product engineers do an additional quality control. They test a certain percentage of all products from the production line a second time to ensure that the quality meets their vigorous standards, and to make sure that there is never a batch of products with even a slight problem. All Rockville sub enclosures are backed with a full 90 day warranty, though it is unlikely that you will need to use it.
Complete Dual Subwoofer Enclosure Installation Kit!
Includes:
- 20 Drywall Wood Screws (Wood screws are the type of screws; the screws are actually made of metal)
- 20 Feet of 14 AWG Blue Speaker Wire
- 4 Spade Terminals
This accessory package includes everything you need to install two subwoofers into an enclosure, and wire your enclosure to your amplifier. This package is a top of the line accessory package which we put together and tested.
The drywall wood screws were hand selected by our installation experts because they drill into the enclosure very cleanly, without chipping the enclosure. The speaker wire is 14 gauge. This is way better than using 16 gauge. You can be 100 % sure that your enclosure will have a clean signal to the amplifier with this top of the line speaker wire. These spade terminals have also been hand selected by our installation experts to make the internal wiring simple, secure, and to run the audio signal cleanly.
- UPC:
- 613816006557
