- (2) Rockville 15" Car Audio Subwoofers
- (1) Rockville Dual 15” 2.1 cu.ft. 3/4" MDF Sealed Car Sub Enclosure Box USA
- 20 Drywall Wood Screws (Wood screws are the type of screws; the screws are actually made of metal)
- 20 Feet of 14 AWG Blue Speaker Wire
- 4 Spade Terminals
Video of W15K6D4 V2:
Features:
- Rockville W15K6D4 V2 K6 Series 15" Dual 4-Ohm Car Subwoofer
- Peak Power Handling: 4000 Watts
- Program Power Handling: 2000 Watts
- CEA Rated RMS Power Handling: 1000 Watts
- 3" Voice coils (Black Aluminum Former Wound with 100% OFC Copper Wire
- The wire we use is made in the USA! It is one of the most important components to make the sub high quality and last longer
- Double Stacked 112 Oz High Quality Magnet
- Cast Aluminum Basket With Black Sanded Finish Makes This Sub Very Efficient
- Fiber Reinforced Ultra Stiff Black Non-Pressed Paper Cone
- Thick Foam Surround Provides Incredible Sound Quality With Minimal Distortion
- Red Stitching Cone Reinforcement Ensures Long Life
- Polypropylene (PP) Dustcap
- Two Chrome-Plated Binding Post Terminals - These are the best terminals on the market and they accept any gauge wire
- Impedance: Dual 4-Ohm Voice Coils
- Vented Hole on T-yoke Enhances Heat Dissipation
- Special Custom Rubber Boot Magnet Covers Make the Woofer Look Nice and Protects the Magnet
- Custom Rockville Mounting Gasket Looks Beautiful and Makes it Easy To Mount the Subwoofer Air-Tight
- High BL Magnetic Motor Gap
- We use the highest grade black glue that handles extremely high temperatures which allows our woofer to handle even more power than they are rated
- Cutout Diameter: 14.09” inches
- Mounting Depth: 7.4” inches
- Frequency Response: 27 Hz - 1.5K kHz
- 8mm T-Yoke + 8mm Washer
- Sensitivity: 85dB
- Sealed Enclosure Volume: 1.85 - 3.0 Cubic Feet
- Vented/Ported Enclosure Volume: 2.75 - 4.0 Cubic Feet
- Weight: 19.84 Lbs.
- Shipping Weight: 24.25 Lbs.
- Shipping Box Dimensions: 18.19" x 18.19" x 13.19" Inches
- XMAX:24 MM (One way)
Detailed Info:
- Body: Non-Pressed Paper
- Gap Plate Inside Diameter: 90mm (3.54 inches)
- Gap Plate Outside Diameter: 156mm (6.14 inches)
- Gap Plate Thickness: 25mm (1 inch)
- Yoke Outside Diameter: 145mm (5.71 inches)
- Yoke Thickness: 8mm (0.31 inches)
- Yoke Pole Diameter: 70mm (2.8 inches)
TS Parameters:
TS Parameter | Wired in Series | Wired in Parallel | Description of Measurement |
Electrical Parameters |
|||
Re |
8.07 Ohm |
2.05 Ohm |
Electrical voice coil resistance at DC |
Le |
7.619 mH |
1.907 mH |
Frequency independent part of voice coil inductance |
L2 |
11.216 mH |
2.829 mH |
Para-inductance of voice coil |
R2 |
17.51 Ohm |
4.44 Ohm |
Electrical resistance due to eddy current losses |
Cmes |
784.26 µF |
3145.99 µF |
Electrical capacitance representing moving mass |
Lces |
22.28 mH |
5.56 mH |
Electrical inductance representing driver compliance |
Res |
54.75 Ohm |
13.47 Ohm |
Resistance due to mechanical losses |
fs |
38.1 Hz |
38.1 Hz |
Driver resonance frequency |
Mechanical Parameters (Using Laser) |
|||
Mms |
345.647 g |
338.431 g |
Mechanical mass of driver diaphragm assembly including air load and voice coil |
Mmd (Sd) |
319.142 g |
311.927 g |
Mechanical mass of voice coil and diaphragm without air load |
Rms |
8.05 kg/s |
7.988 kg/s |
Mechanical resistance of total-driver losses |
Cms |
0.051 mm/N |
0.052 mm/N |
Mechanical compliance of driver suspension |
Kms |
19.78 N/mm |
19.35 N/mm |
Mechanical stiffness of driver suspension |
Bl |
20.994 N/A |
10.372 N/A |
Force factor (Bl product) |
Lambda s |
0.066 |
0.069 |
Suspension creep factor |
Loss Factors |
|||
Qtp |
1.376 |
1.393 |
Total Q-factor considering all losses |
Qms |
10.271 |
10.131 |
Mechanical Q-factor of driver in free air considering Rms only |
Qes |
1.514 |
1.54 |
Electrical Q-factor of driver in free air considering Re only |
Qts |
1.319 |
1.337 |
Total Q-factor considering Re and Rms only |
Other Parameters |
|||
Vas |
48.0382 l |
49.1035 l |
Equivalent air volume of suspension |
n0 |
0.168% |
0.169% |
Reference efficiency (2 pi-radiation using Re) |
Lm |
84.46 dB |
84.48 dB |
Characteristic sound pressure level (SPL at 1m for 1W @ Re) |
Lnom |
84.43 dB |
84.38 dB |
Nominal sensitivity (SPL at 1m for 1W @ Zn) |
Sd |
819.4 cm² |
819.4 cm² |
Diaphragm area |
EBP |
25.2 |
24.7 |
Efficiency bandwidth product |
Description for Rockville Enclosure:
The RD15 dual sealed speaker box is made in the USA with Grade “A” ¾” MDF wood. This enclosure is made with precision cutting machinery by industry experts that have been making these enclosures in the USA for over 20 years. All Rockville enclosures come with a customized enhanced glue that is unmatched by any other manufacturer. That means that the carpet will stay in place and not rip or tear. The ¾” USA MDF is much stronger then any type of import wood. This will keep your box performing at an optimal level by not flexing and distorting your woofers. Your woofers will thank you! EVERY Rockville enclosure is not only glued at all joints but stapled as well. If that wasn’t enough we add a layer of silicon to every seam! This makes your Rockville enclosure rock even more!
MADE IN THE USA WITH PRIDE!
Features:
- Rockville RD15 Dual 15" Sealed Subwoofer Enclosure
- Proudly Made In The USA, Using Only The Finest Quality Materials - For The Best Level of Performance From Your Subs!
- 3/4" USA Heavy Duty MDF Construction
- Machine precision cut mounting holes
- Top of the line Glue for extra durable adhesion
- Designed, tested, and engineered to work with most of today’s popular woofers. These enclosures are built with the quality additives needed to maximize the performance of any sound system.
Enclosure Measurements:
- Type of Enclosure: Sealed
- Enclosure Sub Size: Dual 15"
- Dimensions in Inches: 16.75" L x 36" W x 16.25 H"
- Top and Bottom Depth: 16.75"
- Mounting Depth: up to 15.5" (enough depth for any sub on the market)
- Gross Volume Per Sub (Measurement for the outer dimensions of the box): 2.7 Cubic Feet
- Net Volume Per Sub (Measurement for the outer dimensions of the box less the thickness of the wood): 2.1 Cubic Feet
Complete Dual Subwoofer Enclosure Installation Kit!
Includes:
- 20 Drywall Wood Screws (Wood screws are the type of screws; the screws are actually made of metal)
- 20 Feet of 14 AWG Blue Speaker Wire
- 4 Spade Terminals
This accessory package includes everything you need to install two subwoofers into an enclosure, and wire your enclosure to your amplifier. This package is a top of the line accessory package which we put together and tested.
The drywall wood screws were hand selected by our installation experts because they drill into the enclosure very cleanly, without chipping the enclosure. The speaker wire is 14 gauge. This is way better than using 16 gauge. You can be 100 % sure that your enclosure will have a clean signal to the amplifier with this top of the line speaker wire. These spade terminals have also been hand selected by our installation experts to make the internal wiring simple, secure, and to run the audio signal cleanly.
- UPC:
- 613815777328